Display for Mi 10 Ultra replacement

MegaMatze

Member
Oct 13, 2009
7
1
1
Hi Guys,

I never made it to brake my screen but today is the first time... since I could not wait for the correct protector to arrive. Now I have the spiderman app on the screen. Its all broken after having fallen down.
Do you guys know, if it is possible to replace on that phone? I havent found a screen on Ali yet, maybe you know something?

Thanks in advance

Matze
 

MegaMatze

Member
Oct 13, 2009
7
1
1
Hey,

photos are attached here. Unfortunately on upper end and on lower end it broke. Really sad about it.
Also changing it once available seems rather difficult. I hoped, that it would be sufficient to only remove display side and put in new one but you also have to disassamble the entire back with a lot of components.... very sad



 

AerationCheese

Senior Member
Sep 3, 2020
115
1
28
There are pretty much no modern phones in existence that you can just pull the screen off from the front and slide a new one in. It's always been full disassembly.
 

Grdchef

New member
Nov 7, 2020
1
0
0
Mi10 Ultra screen replacement

Hello,
I have exactly the same problem than you.
I tried to find a display to replace mine.
I found 2 websites vopmart ans cellspare.
You can find on Youtube how to replace it.
To be honest I did not order the display yet.
I sent an email to the websites to be sure it is for Mi 10 Ultra and in stock. Unfortunately I did not receive any answer.
As I don t know those website I am not so confident. The reviews are not so good.
Let me know if you find a solution. I will continue my research and keep you posted.
Thank you
Ivan
 

batareikin51

Member
Oct 1, 2013
39
2
28
Chisinau
I never made it to brake my screen but today is the first time... since I could not wait for the correct protector to arrive. Now I have the spiderman app on the screen. Its all broken after having fallen down.
Sorry bro for your loss :(
Eventually it is just phone, and as any other tool it can be fixed. So, bro, just take it easy!

Stock protective case seems to be adequate. It should be ok in most cases. How did you drop it?
 

Sprucemoose90

New member
Feb 23, 2020
1
0
0
me too

I too was unfortunate enough to break the display of my phone. Honestly im really surprised just how easy the screen broke as it had a case on it and fell from about knee height. Anyway i emailed vopmart and was assured the display was original part so i ordered it and it arrived less than two weeks later. I took it to a local repair shop who fitted the screen, they advised that the phone would need to be sent to their specialist repair centre so would take a few days.
When I got the phone back I noticed right away that the finger print scanner was not working or even registering with the phone. I took the phone back and the person in the shop did not seem very knowledgable about this and stated that when apple screens are replaced, the finger print sensor will no longer work. I am very doubtful that this applies to this phone as i’ve read many others replacing Xiaomi screens with finger print scanner working as new. Could this be a software related issue i.e. if i factory reset the phone perhaps it would register the newly installed hardware, or is this likely to be hardware related i.e. finger print sensor cannot be replaced or something?

I also noted that the wireless charging was no longer working as well so im not sure if this has just been an issue with the reassembly during the repair or something else. The phone itself has been sent away to try and get to the bottom of the wireless charging issue but the guy in the shop did not seem very optimistic about the finger print scanner. As far as im aware the scanner is built into the display so it should definitely be there regardless of the phone recognising it or not, or am i wrong?

Sorry for the long post, I’m not very knowledgeable when it comes to the hardware side of phones. Any advice on this would be appriciated.
 

MegaMatze

Member
Oct 13, 2009
7
1
1
Ok quick feedback. So I was able to order on VOPMART and got it for around 200 bucks to Germany without custom or duty problems via the EU Express shipping method. I heated up the back and got the cover away without bigger problems. Took apart the obvious parts (quite a lot to take apart)
With the display unfortunately, I heated up but the glue is very strong which isnt a big problem since it is broke anyways. Unfortunately when I slit the tool to disassemble in i unfortunetly cut the sensor cable for the finger print sensor, so now i am not able to use the fingerprint sensor anymore. Se be really careful there when taking appart the screen (I guess its best to just break the glas and take it appart from inside.)
After putting the new display on you have to get the cable through the mainboard which is also a little tricky but you do not need to take the entire mainboard out - its sufficient to lift it a little bit to get the wire through. Then put everything back together and voila - everything worked again beautifully only without the finger print sensor....
 
  • Like
Reactions: Sathelp

helljumperx

Member
Jul 8, 2010
43
1
28
Ok quick feedback. So I was able to order on VOPMART and got it for around 200 bucks to Germany without custom or duty problems via the EU Express shipping method. I heated up the back and got the cover away without bigger problems. Took apart the obvious parts (quite a lot to take apart)
With the display unfortunately, I heated up but the glue is very strong which isnt a big problem since it is broke anyways. Unfortunately when I slit the tool to disassemble in i unfortunetly cut the sensor cable for the finger print sensor, so now i am not able to use the fingerprint sensor anymore. Se be really careful there when taking appart the screen (I guess its best to just break the glas and take it appart from inside.)
After putting the new display on you have to get the cable through the mainboard which is also a little tricky but you do not need to take the entire mainboard out - its sufficient to lift it a little bit to get the wire through. Then put everything back together and voila - everything worked again beautifully only without the finger print sensor....
Hello, I recently broke my Mi 10 Ultra screen and used your recommendation of purchasing from VopMart. I took it to a store to have them do it professionally and advised them to be careful of the finger print sensor cable. He told me the phone was repaired without any damages. Even the finger print cable was salvaged....I turn on the phone and the finger print sensor doesn't work. I'm not sure if the dude was lying to me.....or if the screen is faulty.....or if I need to do a factory data reset so the mother board can recogonize the new connection maybe. Any help would be appreciated. I really like to have the in screen finger print sensor.
 

sunilstark 1

Member
Aug 20, 2020
12
1
3
Ok quick feedback. So I was able to order on VOPMART and got it for around 200 bucks to Germany without custom or duty problems via the EU Express shipping method. I heated up the back and got the cover away without bigger problems. Took apart the obvious parts (quite a lot to take apart)
With the display unfortunately, I heated up but the glue is very strong which isnt a big problem since it is broke anyways. Unfortunately when I slit the tool to disassemble in i unfortunetly cut the sensor cable for the finger print sensor, so now i am not able to use the fingerprint sensor anymore. Se be really careful there when taking appart the screen (I guess its best to just break the glas and take it appart from inside.)
After putting the new display on you have to get the cable through the mainboard which is also a little tricky but you do not need to take the entire mainboard out - its sufficient to lift it a little bit to get the wire through. Then put everything back together and voila - everything worked again beautifully only without the finger print sensor....
I am glad atleast the screen is working.. do you know if anyone is selling spare batteries?? And charging port