Download KitKat CM11 4.4.2 for Nook HD+ Here

[webdroidmt]

Thx. The PA Gapps are working great.

Hopefully the OP will get updated as it implies the 1209 Gapps it links to are ART compatible.

Quote from OP:
A couple of things to note, not all gapps packages are ART compatible, the gapps I linked from 1209 do work, I'm not sure about the ones linked on succulent's blogsite from 1208. I believe the PA zero day gapps are also ART compatible. End Quote



I make mention of the PA gapps being ART compatible in the OP, also the 1209 gapps I linked do work for me with ART runtime. Not sure why it didn't work for you. If I see other posts where the 1209 gapps are not working, I'll delete that link.

Anyway, it seems that the PA zero day gapps are the best bet for ART, as I've also used them successfully with my N7. I'll put a link to the PA gapps OP with download links in my OP.

Mike T

 

[rnb5500]

Quote from OP:
A couple of things to note, not all gapps packages are ART compatible, the gapps I linked from 1209 do work, I'm not sure about the ones linked on succulent's blogsite from 1208. I believe the PA zero day gapps are also ART compatible. End Quote



I make mention of the PA gapps being ART compatible in the OP, also the 1209 gapps I linked do work for me with ART runtime. Not sure why it didn't work for you. If I see other posts where the 1209 gapps are not working, I'll delete that link.

Anyway, it seems that the PA zero day gapps are the best bet for ART, as I've also used them successfully with my N7. I'll put a link to the PA gapps OP with download links in my OP.

Mike T

I noticed with the 1209 Gapps, Play Store was set to auto update and began updating Google apps immediately on first boot. Then I changed the run time setting to ART and rebooted.

Is it possible ART compatible Gapps could be updated to non-ART Gapps through Play Store? Not really knowing how Dalvik/ART works, IDK if this is a possibility.

 

[rhyang]

Decided to tinker with ART on my SD card install. Of course the gapps linked in the blog post are incompatible with ART, so I downloaded the PA gapps, but looked at the updater-script first, and compared it to the one from the blog post for SD install.

I changed the following line :

run_program("/sbin/busybox", "mount", "/system");

to this : (which is what succulent has in the gapps for SD install)

# run_program("/sbin/busybox", "mount", "/system");
# for SD card install
mount("ext4", "EMMC", "/dev/block/mmcblk1p2", "/system");

The /dev/block/mmcblk1p2 partition is where /system is when booting from the SD card. Flashed this changed zip and it seems to work.

 

[Tschumi]

Has anyone tried to dirty-flash this over cm10.2?

 

[mcord11758]

Well got everything installed. Have to say ART does not work well for me. Some apps I use frequently such as xbmc will not run while enabled. Nook feels far less responsive as well. Benchmarks sky rocket but I can't see using it, unless I am doing something wrong. Overall performance is on par with cm10.2, maybe a tad more lag

Sent from my Nook HD+ using XDA Premium 4 mobile app

 

[sublimee]

IMO CM11 is really quicker than all pre-kitkat 4.X builds.

A great thing I noticed about ART is that free RAM on boot is 500MB. With Dalvik on CM11, free RAM on boot is 390MB.

Everything runs snappy and besides ART app compatibility, this is a great upgrade!

Note: I'm on the faulty emmc 16gb, no trim usage so far, lag seems to be minimal.

 

[felacio]

Running into some problems with SixAxis. I can pair it fine with my HTC One but it isn't finding the controller when using the Nook with this ROM. I wasn't using a cable, just changing the BT Key and my One found it but Nook won't.

Anyone know if cable pairing is required or if the PS3 controller even works with the Nook regardless of ROM over bluetooth? I know they work over cable but haven't really seen much about BT working with it.

 

[williamlaw]

can this rom flash on internal storage ?? since i don't have large micro sd

thanks

 

[gotbass]

Running into some problems with SixAxis. I can pair it fine with my HTC One but it isn't finding the controller when using the Nook with this ROM. I wasn't using a cable, just changing the BT Key and my One found it but Nook won't.

Anyone know if cable pairing is required or if the PS3 controller even works with the Nook regardless of ROM over bluetooth? I know they work over cable but haven't really seen much about BT working with it.

im fairly certain sixaxis will not pair to ps3 controllers on our nooks.
No one has managed to do it successfully from my extensive research including myself.

 

[felacio]

im fairly certain sixaxis will not pair to ps3 controllers on our nooks.
No one has managed to do it successfully from my extensive research including myself.

So the only way is with a cable? Hmm... Guess I'm gunna need a gender changer after all.

Sent from my HTC One using Tapatalk

 

[williamlaw]

- ext sd-card can't be found in CWM, how to flash ??

- then tried to flash in TWRP, but error "E:Unable to mount '/data1'

please help

thanks

 

[FirePsych]

- ext sd-card can't be found in CWM, how to flash ??

- then tried to flash in TWRP, but error "E:Unable to mount '/data1'

please help

thanks

Read the OP and Succulent's blog. Make sure you have the latest TWRP 2.6.3 or latest CWM

See my post #18 I think. You may need a reboot or two.
I get the same data error but it doesn't seem to have any effect.

Sent from my XT907 using Tapatalk

 

[oboefiend]

- ext sd-card can't be found in CWM, how to flash ??

- then tried to flash in TWRP, but error "E:Unable to mount '/data1'

please help

thanks

I had the same problem so I put the files on the internal memory and flashed from there. Worked perfectly.

 

[webdroidmt]

- ext sd-card can't be found in CWM, how to flash ??

- then tried to flash in TWRP, but error "E:Unable to mount '/data1'

please help

thanks

Did you read the OP? It says "If you use CWM, you can only use internal storage for all functions, installs, backup/restore etc. It is a limitation of CWM. TWRP allows both internal and ext sdcard functionality". Please take the time to read before asking simple questions that just clutter the thread. Thank you.

The "E:Unable to mount '/data1'" in TWRP nothing to worry about.

Mike T

 

[williamlaw]

Read the OP and Succulent's blog. Make sure you have the latest TWRP 2.6.3 or latest CWM

See my post #18 I think. You may need a reboot or two.
I get the same data error but it doesn't seem to have any effect.

Sent from my XT907 using Tapatalk

Thanks, just tried to switch to ART but "GAPPS" not work..... which one support to run under ART ??
otherwise, TWRP not flashed to internal storage ?? since CWM 6045 showed.... ??

 

[swaaye]

Did Google really dump the AOSP browser and force their mobile Chrome variant upon us with Kitkat?

 

[king200]

I want to try ART. I set it to run ART in Developer Settings and reboot but after reboot, Dalvik is still being used. I am using_Gapps, pa_gapps-stock-4.4.2-20131215-signed.zip_. If that is not the proper Gapps, can someone point me to a correct one?

 

[webdroidmt]

New build is up 12/24/13 http://goo.im/devs/succulent/ovation/cyanogenmod/internal

Changelog from dev succulent
12/24 - Repo synced, fixed booting animation, device will boot into landscape mode, I recommend enabling Rotate lock screen, updated CWM recovery to include install from "/storage/sdcard1" (external SDCard) & enabled Fdisk advanced features for expanding SDCard Data1 partition. This build might require a wipe data/factory reset.

Mike T

 

[webdroidmt]

I want to try ART. I set it to run ART in Developer Settings and reboot but after reboot, Dalvik is still being used. I am using_Gapps, pa_gapps-stock-4.4.2-20131215-signed.zip_. If that is not the proper Gapps, can someone point me to a correct one?

Are you using Xposed Framework? If so, that will reset it back to Dalvik

Mike T

 

[king200]

Are you using Xposed Framework? If so, that will reset it back to Dalvik

Mike T

Yes, I'm using Xposed. Thanks.

I read that early on but forgot. I'm going to try with Xposed disabled. Unless their is really a remarkable difference, I'll stick with Dalvik.