Droid Turbo cases

R

rx2mazda

Senior Member
Apr 12, 2011
74
35
0
Nov 28, 2014 at 5:57 PM
Mikey503 said:
Looks great! Did the structure become flimsy at all after cutting out the back?
Click to expand...
Naturally it loses a bit of structure, but since it was already a tight fit with the BN it ends up being fine. When I first started, I knew the risk and I was just gonna throw it away if it came out too floopy. I already got a refund from amazon and they told me to keep the case, so it was free. The Tudia actually fit my BN fine, a little tight but great after some massaging. I'm gonna keep it on until a dedicated bumper is released. Like my lady, It looks so much better with the back out! :laugh:

johnny grep said:
Employee Edition... nice.
Click to expand...
By far the best looking Turbo IMO!
 
  • Like
Reactions: mycalw
U

underscore_hero

Member
Jan 14, 2011
16
7
0
Nov 30, 2014 at 12:18 PM
Has anyone tried this yet?

Luxury-Flip-Leather-Stand-Case-Wallet-Cover-Skin-For-Motorola-Droid-Turbo-XT1254 on Ebay (Can't link, noob status)

Looks just like the Poetic FlipBook for the Moto-X, could be their factory in China.....should I roll the dice?
 
A

ahaynes42

Senior Member
May 23, 2013
190
56
48
Dec 3, 2014 at 5:22 PM
OneStepAhead said:
Since a lot of people have been emailing us (Diztronic) asking when our case is going to be released and if it will fit both versions of the Droid Turbo, I wanted to post on XDA to let you guys know whats going on.

We originally hoped to be able to make 1 case that would work for both versions, but it just didn't work. Well technically it did work, but it was too loose on the Kevlar model. We will be releasing 2 sizes, one for Kevlar and one for Ballistic Nylon. This is the reason why it's taking us a little longer, as we didn't want to rush to market like some competitors did and have a case that doesn't work. So coming out first will be our case for the Kevlar version, and that should be as soon as next week. Then our case that will work for the Ballistic Nylon Droid Turbo will follow about 2 weeks later, so mid December. Thanks for your patience!
Click to expand...
Thanks for coming to the forums and keeping us updated. I've used Diztronic for both my Gnex and my S4 and have been very pleased with the products. It's too bad all of us with the BN version will have to wait longer (same with other case makers too), but I think I'll be okay another couple of weeks.
 
M

mjc2251

Senior Member
Jul 27, 2013
156
31
0
Houston
Dec 5, 2014 at 1:20 PM
OneStepAhead said:
Since a lot of people have been emailing us (Diztronic) asking when our case is going to be released and if it will fit both versions of the Droid Turbo, I wanted to post on XDA to let you guys know whats going on.

We originally hoped to be able to make 1 case that would work for both versions, but it just didn't work. Well technically it did work, but it was too loose on the Kevlar model. We will be releasing 2 sizes, one for Kevlar and one for Ballistic Nylon. This is the reason why it's taking us a little longer, as we didn't want to rush to market like some competitors did and have a case that doesn't work. So coming out first will be our case for the Kevlar version, and that should be as soon as next week. Then our case that will work for the Ballistic Nylon Droid Turbo will follow about 2 weeks later, so mid December. Thanks for your patience!
Click to expand...
I love your guys cases! They are affordable and always fit perfectly. Appreciate the update and looking forward to buying one for my BN turbo!
 
G

gqskrub

Senior Member
Nov 26, 2009
197
68
0
Dec 6, 2014 at 6:22 PM
The high-gloss 19.99 Verizon case is the best case currently available for the ballistic nylon version if you like no-frill-thin cases.
 
gordonzhao

gordonzhao

Senior Member
Apr 16, 2009
1,024
119
0
Dec 8, 2014 at 7:10 AM
rx2mazda said:
i really wanted just a bumper. ........so I made my own lol! Started with a Tudia Ultra Slim and cut the back out with a razor blade. I like it! Total cost $10.00 :)
Click to expand...
Rx2, is the top and bottom of the case thick enough that even after the back is cut the lens/back does not touch the surface? Thanks.
 
R

rx2mazda

Senior Member
Apr 12, 2011
74
35
0
Dec 8, 2014 at 2:37 PM
Yes, when on a flat surface the back of the phone doesn't touch. I had another member pm me and said he tried to do it and ruined the case. If your not good with a razor blade it will be challenging Lol. Fwiw, I added the paper thin double sided tape inside along the sides of the case. Now it is super right on the phone everywhere. Looks like a real bumper
 
  • Like
Reactions: gordonzhao
T

thecaptain0220

Senior Member
Jan 3, 2009
128
33
0
Dec 8, 2014 at 4:20 PM
OneStepAhead said:
Since a lot of people have been emailing us (Diztronic) asking when our case is going to be released and if it will fit both versions of the Droid Turbo, I wanted to post on XDA to let you guys know whats going on.

We originally hoped to be able to make 1 case that would work for both versions, but it just didn't work. Well technically it did work, but it was too loose on the Kevlar model. We will be releasing 2 sizes, one for Kevlar and one for Ballistic Nylon. This is the reason why it's taking us a little longer, as we didn't want to rush to market like some competitors did and have a case that doesn't work. So coming out first will be our case for the Kevlar version, and that should be as soon as next week. Then our case that will work for the Ballistic Nylon Droid Turbo will follow about 2 weeks later, so mid December. Thanks for your patience!
Click to expand...
Is there going to be a clear model? I love the look of the back, but really would like to go to a TPU material.
 
gordonzhao

gordonzhao

Senior Member
Apr 16, 2009
1,024
119
0
Dec 8, 2014 at 8:01 PM
rx2mazda said:
Yes, when on a flat surface the back of the phone doesn't touch. I had another member pm me and said he tried to do it and ruined the case. If your not good with a razor blade it will be challenging Lol. Fwiw, I added the paper thin double sided tape inside along the sides of the case. Now it is super right on the phone everywhere. Looks like a real bumper
Click to expand...
Thanks for the advice, I ordered the amzer case, if I don't like that I'll get the tudia.
 
M

mrfoggy

New member
Aug 19, 2010
4
1
0
Dec 8, 2014 at 10:17 PM
rx2mazda said:
Yes, when on a flat surface the back of the phone doesn't touch. I had another member pm me and said he tried to do it and ruined the case. If your not good with a razor blade it will be challenging Lol. Fwiw, I added the paper thin double sided tape inside along the sides of the case. Now it is super right on the phone everywhere. Looks like a real bumper
Click to expand...
Just got my Tudia from Amazon today. Will be trying to make the bumper sometime this week. Any tips?

Also, the sides of the case are a bit ambiguous when it comes to where to cut. and you really have to be careful around the power and volume buttons. How much space did you leave for them? Hard to tell from the pictures.
 
You must log in or register to reply here.

New posts

Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone