got a little overzealous with some settings and made it so my phone doesn't boot past the Verizon screen. I wiped cache and didn't help, factory reset, didn't work. Tried to flash back to 0k3, finally tried to flash back to pb1. When I try pb1, it hangs at the samsung animation and when I go into recovery mode it still says system recovery is 0k3. Every rom I try to flash does not change that so I dont think my falshes are actually flashing. I'm using odin 3.10. I really just want a complete clean re-install, but cant seem to figure out how to get that to work. It's probably something very easy, but I cant find a thread that sounds 100% similar
Dumb newb softbrick, Flashes dont take
- Thread starter kinsleia
- Start date
So everything during Odin flashes looks normal, but it still doesn't take? This is very strange behavior.
Try using another USB cable/port, and if you have access to one, another computer.
Try using another USB cable/port, and if you have access to one, another computer.
Odin logs? Screenshots? Not really enough information. Maybe find a new .tar.md5?
Everything looks like it flashes normal. I've used the same files on a different device with same files and hardware and that's worked fine. It passes but when I reboot to softloader it's still ok3
Its not something I've ever set and I don thave an account with Samsung. Would Odin report a "Passed" flash if it were set? I guess I'm screwed if it did get activated somehow, right?
In Download Mode, it will say
Code:
REACTIVATION LOCK (KK): OFF
Code:
REACTIVATION LOCK (KK): ONOkay, its off, so not that.
Rest of info in that screen is
Product Name: SM-g900v
Current bin: Samsung official
System Status: custom (not sure what that means but it does display "Custom" with a big unlocked lock when booting, but it was doing that before it stopped working)
Qualcomm Secureboot: Enable (CSB)
rp swrev: s1, t2, r1, a2, p1
Secure Download enable
UDC start
here is my Odin log, not that I see anything unusual here:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Try downloading the full stock PD1 Marshmallow tar from sammobile and flashing that thru odin (slow download sry)
Having trouble getting adb commands to work. Can only seem to get it recognized if I go into "apply update from ADB" and then its only sideloaded and flashboot just "waits for device." is their another way I can get that info without being able to boot the device up fully?
Okay, so download finished and I applied it, had to reboot several times but it did come up and is now on PD1. So I guess now my question is there a way to root right from where I am, or do I have to downgrade
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone