DZ09 Smartwatch

Search This thread

frankandwendy

Senior Member
Jun 8, 2015
221
32
DZ09 Smartwatch, I had knew that many germany people buy it,but other countyies less than . It is strange.
D1_1.jpg
 

dvhooren

Member
Nov 3, 2010
5
0
DZ09 app

Hi,

I bought a DZ09 and received it last week. I am from the Netherlands...
I like the design and the display is also good. Some functions I will probably never use but in general a nice smartwatch.
I got mine for 28 euros and for that it is not bad.

Only problem is the software for the smartphone. The software you can download by scanning the QR code is Chinese.
Can not get that to work.

I have tried several app but I finally ended up with an app called RWATCH.
That one connects to the smartwatch, you can do all things with sms messages.

One thing is the app crashes to often. That is a pitty so I hope they will increase stability.
Secondly the health control in the smartphone RWATCH app does not seem to work.
Maybe I do something wrong or I just have to wait for an update of the app.

If the app runs it is a good tool.

Hopefully I will find some other software which will run smoothly on the smartphone.

Oh and I have a Samsung Note 4 running Lollipop nowadays.
 

Homage

Member
Jun 24, 2013
37
1
London
Thank you thedarkharlequin for posting the proper link for us all above. I have had my DZ09 for just over 1 week. I had many issues with the original download wich is provided to you through the QR code located on the watch. After a day of fighting with it crashing all the time I looked to the app store on my SGH-I337M and saw a lot of promising looking apps that were all claiming to do the job. First I tried the BT Notifications like the watch said. Though it was an upgraded version it worked just as well as the first. I then tried other apps that claimed to work with the watch. Same story. Found an app called SmartWear which did the job for the notifications but left all the other capabilities in the dirt. Once I tried the link above I have had all functions and capabilities working 100%
 

seek4

Senior Member
Nov 29, 2008
250
26
dvhooren
I know this is a little old, so hopefully you figured it out, but go here http://www.fundo.cc/other/download/FunDoAPP/
that's the qr code site. download the one labeled "BTNotifications Android". that's the one that works with the dz09.
Me 3, my DZ09 just arrived to Denmark from China after 6½ weeks of waiting, so plenty of time to bookmark your post, just love it, thank you SO much thedarkharlequin! :good:
BTW couldn't even get the darned bar-code to work (several QR-apps), maybe I turned off to much Google spy on my phone? Anyway the parring works like a charm with this app, only my DZ09 doesn't have the cool watch-faces and animations I've seen on videos so next step is another firmware, just hope my watch isn't a fake one.. :p
 

AndrewJamesB

Member
Nov 16, 2010
5
2
Me 3, my DZ09 just arrived to Denmark from China after 6½ weeks of waiting, so plenty of time to bookmark your post, just love it, thank you SO much thedarkharlequin! :good:
BTW couldn't even get the darned bar-code to work (several QR-apps), maybe I turned off to much Google spy on my phone? Anyway the parring works like a charm with this app, only my DZ09 doesn't have the cool watch-faces and animations I've seen on videos so next step is another firmware, just hope my watch isn't a fake one.. :p

Hi Seek4,

let me know how you get on with the firmware update, im also looking for a way to upgrade
 

aaron.esp.35

Member
Jul 3, 2012
33
1
I'm looking for a software update too due to ten fact that it holds an interface different than te original one which seems to be a Gear S but no success could you notify me as soon as you reach sth?
 
  • Like
Reactions: Jimmys84

seek4

Senior Member
Nov 29, 2008
250
26
Hi Seek4,

let me know how you get on with the firmware update, im also looking for a way to upgrade

I'm looking for a software update too due to ten fact that it holds an interface different than te original one which seems to be a Gear S but no success could you notify me as soon as you reach sth?
Year, I thought I had found one just waiting for me (I did, her name is Berit, but that's a whole other story:D), but that was for MTK6250, ours are MTK6260A as far as I know, so didn't apply at all.. :silly: The tool provided in the download might work for us however, if anyone
ANYONE??
could find a nice firmware or even somebody who have the nice firmware in his/her DZ09 and knows how to scratch it out for share (I don't know that stuff)..

This is the site I found (and maybe so did some of you) http://chinagadgetsreviews.blogspot.dk/2014/08/mtk6250-bluetooth-154-lcd-watch.html Still not for us mind you, but if one of them brilliant nerds in here is watching, please help us! :fingers-crossed:
 

heap1000

Member
Jun 16, 2011
6
0
For you guys who have had there watches for a while can you answer me a couple of questions.

When the phone and watched are synced I like that you can see who is calling but I want to be able to answer my phone to speak and not talk through the watch! Even when I make a call on the phone while paired to the watch it comes out of thr watch and not the phone.

While using Google music I want to be able to skip songs etc thr only way this can be done is if the music comes out of thr watch but not when it comes out of the phone.

Thanks
 

seek4

Senior Member
Nov 29, 2008
250
26
Should have a look, I think this is what we've been looking for.

Try with a Pc Browser cause it can't open on mobiles' browses such as Chrome

http://www.dzgsm.com/vb/threads/25739-firmware-ai-watch-z20/
Chip is the same, and I think the specs. are similar enough for the firmware to work on our DZ09s (but what do I know(?)), unfortunately both links are down, but I see the watch here in XDA, possible with firmware, haven't got time for a closer look today (tonight DK time), but will look into that tomorrow! :)

Edit nov. 11,
OK folks, I am very short of time today, but would someone please take a look at this thread http://forum.xda-developers.com/smartwatch/other-smartwatches/ai-watch-z20-mtk6260a-t2957013 and this site http://forum.android.com.pl/topic/202745-aiwatch-z20/ ? I think they may be our people although I somehow doubt the firmware mentioned has the fun/cool stuff we are looking for.
 
Last edited:

aaron.esp.35

Member
Jul 3, 2012
33
1
Year, I thought I had found one just waiting for me (I did, her name is Berit, but that's a whole other story:D), but that was for MTK6250, ours are MTK6260A as far as I know, so didn't apply at all.. :silly: The tool provided in the download might work for us however, if anyone
ANYONE??
could find a nice firmware or even somebody who have the nice firmware in his/her DZ09 and knows how to scratch it out for share (I don't know that stuff)..

This is the site I found (and maybe so did some of you) http://chinagadgetsreviews.blogspot.dk/2014/08/mtk6250-bluetooth-154-lcd-watch.html Still not for us mind you, but if one of them brilliant nerds in here is watching, please help us! :fingers-crossed:
I checked the site and do what I'd had to do and my watch died so I used my guaranty now they repaired my watch ⌚
What I discovered is that we have a clone watch from u10 due to I found two types of firmware of the same watch but different type.

Our model is Zd09 no other so be careful cause you can install firmwares and they run buy your watch may be died or the screen can not work
 

zswielder

Senior Member
Feb 25, 2011
620
67
Can someone tell me if this watch is capable of sending/receiving text messages that come to your phone? I've been reading mixed messages on the net. I'm not talking about texts to the phone's own phone number.
 

seek4

Senior Member
Nov 29, 2008
250
26
Hey, I’ve got my hands on a DZ09 with exactly the cool animations, transition modes and watch-faces I believe quite a few of us are were looking for, :cool: but only for borrow. Does anybody know how to copy the firmware, so that we can work on getting it into our watches? :D
 

seek4

Senior Member
Nov 29, 2008
250
26
Can someone tell me if this watch is capable of sending/receiving text messages that come to your phone? I've been reading mixed messages on the net. I'm not talking about texts to the phone's own phone number.
It most certainly can receive (via BlueTooth) messages sent to the pocket phone, it also receives emails sent to the pocket, and sometimes even (but not all) Skype messages. And you can browse text messages in your pocket as well as contacts and call records right on your wrist. I don't know about writing text messages and sending them through BT, haven't tried that because the keyboard/handwriting doesn't support Danish letters "æ, ø and å", but I suppose it is possible, only it's a very small screen for the purpose, don't think you would do that much as it is far more comfortable to use your pocket phone for writing. :)
 

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    dvhooren
    I know this is a little old, so hopefully you figured it out, but go here http://www.fundo.cc/other/download/FunDoAPP/
    that's the qr code site. download the one labeled "BTNotifications Android". that's the one that works with the dz09.
    4

    So! take a deep breath and let's start

    1. Here at this link you find anything about this matter, do not get anything from elsewhere - link -

    2. now get here - link - that guy explains pretty well - for now do just these steps: getting started and installing driver, stop there because what follows despite the gossips, become dangerous stuff for your phone
    note - in the file I have prepared for you there is a full firmware DZ09, is not there for flashing, maybe is not compatible with your phone, you unzip it and use the scatter file for flashtool initialization

    3. now come back on xda here - link - and do all the steps - say a hallelujah, you have extracted full genuine firmware from your phone (keep it somewhere in safe, do not change it or anything else, you'll not find it anywhere you'll look for - is the only perfect compatible firmware with your watch)

    4. now let's burn some watchfaces!
    here are the steps:
    1. do a copy of the firmware you have extracted (for instance rename the new containing folder <DZ-09 mod1>)
    2. create a folder (lets call it <new watch faces>) and put inside all watch face gifs you found at the link
    3. obviously, start the program Mtk_Res
    4. press open (left down buton) browse to <DZ-09 mod1> , as extension select all files and select ROM - <open>
    5. press upper right side <workdir> and go to your <new watch faces> folder and press ok
    6. press <Pictures> upper left and in the main list from left pick which picture you want to change and click on it
    7. in the right side choose the picture you want to insert and click on it
    8. press upper right side button <import> if shows successful go to step 9 if not the picture you chose is to big
    9. press save - it opens browser in the <DZ-09 mod1>, check ROM and accept to overwrite the file


    5. Now flashing - at FIRST flashing make sure in Flash Tool Options / BackUP and Restore you have checked BackUP -> Download/Format -> Restore, in this way it will make a NVRAM copy, after FIRST flashing go in the Flash Tool folder and in BackUP folder you'll find some data, do a copy of this backup folder and put it in the folder where you keep the original firmware you have extracted before. For next flashings change Flash Tool / BackUP and Restore to Download/Format -> Restore

    1. Start Flash Tool and load as scatter the cfg file you have in DZ-09 mod1 folder
    2. Press Download (which means start flashing)
    3. Connect watch through USB and wait to appear the green ring
    4. ENJOY!

    If something goes wrong or doesn't look right feel free to ask!
    4
    hi sir does your rom is 32mb??? can u please give me your rom??
    my specs are
    LD991A_YX_S1_SS7789
    cpt_9304_CAM3A01_LANGA_V3.2

    [BRANCH]:11CW1352MP
    MTK61D_BTDIALER_11
    C
    BUILD TIME :2016/07/04 16:26
    [MRE VERSION]- 266919348

    Can you try firmware me. please report. tanks
    4
    Man, we have to use our brain to find the way...
    Nothing is impossibble...

    I will roughly guide you how to:

    - First, define which ROM you want to mod ?
    - Use 'mtk_6261D_reader-writter.jar' or 'romdz09.jar' utility to extract your ROM (EXT_BOOTLOADER, INT_BOOTLOADER, FILE_01_mtk (ROM), FILE_02_mtk (VIVA) ) to based file *.a, *.b like F1 image (attachment)
    - On Use 'mtk_6261D_reader-writter.jar' or 'romdz09.jar' click Load, then click get pictures
    - Now, Just scrolling down to find the file *.a or *.b to to get *.gif or *.png relating to your watchfaces
    (Here, you can also to modify file languages to your needed language)
    - When, you find the needed file to modify => click extract to file.
    Now, Use the GIMP2 image processing to mod your clock face (image F2)
    And if, language MOD (image F3 &F4) - use google translate to translation to your own language one by one line from language file you want to change...eg: FB4e8.a

    Remember that, the mod file cannot bigger than the original file.
    When MOD was done, just click 'to file', 'to rom' and 'save' ROM

    Now, flash your moded ROM and SEE
    Still need to investigation more since ROM file for MTK6261D was compressed...and the 'mtk_6261D_reader-writter.jar' can not extract all the things, some were broken when extracted...That's why you cann't find the other two watchfaces...we need deeply intervention by WinHex to correct ...

    Ref: Thank 4PDA forum for the instruction, even I don;t know Russian language :D
    - http://4pda.ru/forum/index.php?showtopic=670733&st=4080#entry54850559
    - http://4pda.ru/forum/index.php?act=...&subforums=1&source=all&sort=rel&result=posts

    I attached here my MOD watchface for MTK6261D, whom need it remmeber to Click THANK if you like it

    ============
    Attachment files for someone need it
    3
    Having trouble setting up mms on the DZ09 smartwatch can anyone advise if it has been done.
    Thanks for any assistance:D