DZ09 Smartwatch

[shooterau]

Having trouble setting up mms on the DZ09 smartwatch can anyone advise if it has been done.
Thanks for any assistance

 

[ssKIKOss]

dz09 64mb mtk61d

Thanks a lot but still no working. Screen size and orientation are wrong and touch not working on Dz09 clone

Thank you any way

If you have not repaired it yet.​

Hi, guys! I can't upload on GDrive with other FW so I you need here it is. This is the original FW for DZ09 64mb MTK61D !
***.mediafire.om/folder/tyvpnscnkr3pa/DZ09_MTK61D_64mb_Official_firmware
(change *** to www )
Maybe save a lot of people!

Ps. every fw that i've tried on 64mb unusual made me a split lcd and touch not working. If anyone have the custom FW save my life. Thanks!

 

[edonishusaj]

Fake DZ09 Smart Watch Unable to change wallpaper

Hey Guys My brother bought me a DZ09 SmartWatch For my Birthday And I wrealy Loved It . So after a Few Hours I wanted To Change The WallPaper BuT Every Youtube Video or Every Forum Had An Use As Button But Mine Doesnt So i Assume My Watch Is Fake But Any Ideas on How To Do It?

[VERSION]
X9_1.0_COBSLW_RQ_LSSD_DZ09_JXD7789_3029_3A01_0820_J_LAN_A_V1.0.2
[BRANCH]:
11BW1308MP
V15D_CSN
BUILD: BUILD_NO
SERIAL#:
SN001234567
[BUILD TIME]
2018/04/08 18:48
[MRE VERSION]3100
HAL_VERNO:

 

[pwiggy]

Hi, got a DZ09, details below. When I plug my USB lead into it while it is turned off to flash it, just boots to U Disk or Charge choice and Flash Tool never picks it up.

I've installed a multitude of MTK drivers but the same. If on this menu I chose U Disk it just open the sd card in File Explorer, if I chose Charge it just does that.

I've tried attaching USB cable with the battery out - same. inserting the battery while USB is connected - nothing.

I'm wanting to add watch faces but not having much luck.

S/W JIAQI: LZ9_V1.1_DZ09_CSTXX_QR_LSSD_9307_6531LANG_V1.6.5

H/W VER SC6531_BAR

BASE V
BASSE_SVN

BUILD: 10-28-2019 16:22:41

Any ideas what I'm missing. I've flashed MTK devices before without a prob??

Cheers

Pwiggy

 

[ladislav.heller]

Hello

Is there any official place to get an updated firmware for the DZ09 model, info got by secret code *#3721#:

Q9_61D_240_W90_TN_B_NEW_20160824
[BRANCH]:
11CW1352MP
MTK61D_BTDIALER_11C

 

[yezuzninja12]

Hi, I got a bricked dz09 smartwatch from aliexpress, it has a mt6260ma, X9MB_1.1_CST716B_RQ_WB_DZ09_41_7789_9307BOE_6153_6123_J_LANA_V1.0.8 and I need a backup for it please, someone help please.

 

[GalaxyMGyt]

ayudaaa dz09

ayudaaa, amigos, compre un dz09 , tiene un mt6261, le puse chip, le puse sd, puse una apn de mi linea movilnet, pero no agarra los datos, porque si quiero instalar el navegador me dice user init, y al rato me dice time aut , y de ahi no pasa, aveces dice net busy , ya hice el proceso 10 veces , con apn de movilnet varias, con otras lineas, pero siempre lo mismo , ayuda plox , tambien intente colocarle un software nuevo , que un youtuber me dice que tal ves asi funcione , pero cuando voy a flashear , se queda en 0% (withing) , y no pasa de ahi , ayuda por favor

 

[GalaxyMGyt]

ayuda

ayudaaa, amigos, compre un dz09, tiene un mt6261, le puse chip, le puse sd, puse una apn de mi linea movilnet, pero no agarra los datos, porque si quiero instalar el navegador me dice user init, y al rato me dice time aut, y de ahi no pasa, aveces dice net busy, ya hice el proceso 10 veces, con apn de movilnet varias, con otras líneas, pero siempre lo mismo, ayuda plox, también intente colocarle un software nuevo, que un youtuber me dice que tal ves asi funciona, pero cuando voy a flashear, se queda en 0% (dentro), y no pasa de ahi, ayuda por favor

 

[GalaxyMGyt]

help dz09 mt 6261

Having trouble setting up mms on the DZ09 smartwatch can anyone advise if it has been done.
Thanks for any assistance

Help me, friends, buy a dz09, it has an mt6261, I put a chip in it, I put sd in it, I put an apn of my mobile line, but it doesn't grab the mobile data, because if I want to install the browser it tells me user init, and after a while I it says time aut, and from there it does not happen, sometimes it says net busy, I already did the process 10 times, with several mobile phone apn, with other lines, but always the same, please help, also try to put a new software, that a youtuber tells me that maybe this is how it works, but when I am going to flash, it stays at 0% (withing), and it does not go from there, help please
:llorando::llorando:

 

[Golem_]

ayudaaa, amigos, compre un dz09, tiene un mt6261, le puse chip, le puse sd, puse una apn de mi linea movilnet, pero no agarra los datos, porque si quiero instalar el navegador me dice user init, y al rato me dice time aut, y de ahi no pasa, aveces dice net busy, ya hice el proceso 10 veces, con apn de movilnet varias, con otras líneas, pero siempre lo mismo, ayuda plox, también intente colocarle un software nuevo, que un youtuber me dice que tal ves asi funciona, pero cuando voy a flashear, se queda en 0% (dentro), y no pasa de ahi, ayuda por favor

Unfortunately there is nothing you can do unless your SIM provider still keeps active GPRS services (your watch is not able to connect on else than GPRS/EDGE protocol) - ask your SIM provider if they can give you APN and all setting details for GPRS

 

[J_Villain_904]

Help, please!

Terribly sorry if this has already been addressed, however I've scoured the web trying to figure this out.

Here's the situation: I've recently received my DZ09, purchased a SIM card, & an inexpensive prepaid plan, with a small amount of minutes, text messages, & 100MB, just to try out for a month to see if it's something I want to keep, with more than just what's offered via a bluetooth connection. The plan is on the T-Mobile network via US Mobile.

The problem is this— I'm unable to access the web, or any pre-installed apps that require a data connection (FB, Twitter, browser, etc.).

The watch indicates that the app(s) have not been downloaded yet, & I'm given an option to either cancel or install. I've tried installing till I'm blue in the face. It inevitably times out, & doesn't ever seem to grab an actual data connection, which is quite frustrating, considering that's what was most appealing about the watch. To be able to access the web from my wrist (albeit at a much more limited capacity than usual).

The watch works great as a stand alone phone, but just that...a phone. Texting would be utilized more if I could find a way to get a QWERTY keyboard on the sucker.

While I may be *slightly* tech savvy, this is all above my pay grade. I sold phone & worked in tech support for Verizon many, MANY years before all of this was even an idea (wearables, etc.), however I still enjoy my devices (no matter how "ancient" they may be, considering how rapid this tech advances).

So, anyway, there my issue. If ANYONE could offer ANY assistance here, it would be *GREATLY* appreciated.

Again, sorry if this has already been addressed on here. I just stumbled upon it while trying to figure out how to get my smart watch to be a bit smarter, if you will.

Anyone that can offer any additional insight is free to email me j.allen 《at》yahoo 《dot》com. Thanks for your time, all that have made it this far. REALLY hope to hear back, even if it's just being pointed in the right direction. Thanks!

---------- Post added at 11:50 AM ---------- Previous post was at 11:46 AM ----------

Terribly sorry if this has already been addressed, however I've scoured the web trying to figure this out.

Here's the situation: I've recently received my DZ09, purchased a SIM card, & an inexpensive prepaid plan, with a small amount of minutes, text messages, & 100MB, just to try out for a month to see if it's something I want to keep, with more than just what's offered via a bluetooth connection. The plan is on the T-Mobile network via US Mobile.

The problem is this— I'm unable to access the web, or any pre-installed apps that require a data connection (FB, Twitter, browser, etc.).

The watch indicates that the app(s) have not been downloaded yet, & I'm given an option to either cancel or install. I've tried installing till I'm blue in the face. It inevitably times out, & doesn't ever seem to grab an actual data connection, which is quite frustrating, considering that's what was most appealing about the watch. To be able to access the web from my wrist (albeit at a much more limited capacity than usual).

The watch works great as a stand alone phone, but just that...a phone. Texting would be utilized more if I could find a way to get a QWERTY keyboard on the sucker.

While I may be *slightly* tech savvy, this is all above my pay grade. I sold phone & worked in tech support for Verizon many, MANY years before all of this was even an idea (wearables, etc.), however I still enjoy my devices (no matter how "ancient" they may be, considering how rapid this tech advances).

So, anyway, there my issue. If ANYONE could offer ANY assistance here, it would be *GREATLY* appreciated.

Again, sorry if this has already been addressed on here. I just stumbled upon it while trying to figure out how to get my smart watch to be a bit smarter, if you will.

Anyone that can offer any additional insight is free to email me j.allen 《at》yahoo 《dot》com. Thanks for your time, all that have made it this far. REALLY hope to hear back, even if it's just being pointed in the right direction. Thanks!

CORRECTION!!!

The email is j.allen1182 《at》 yahoo 《dot》com.

 

[Savage Sarjak]

i need firmware for my DZ09 watch
<version>MX6XM-COB-DZ09-9307HSD-YDT-HLC-GL6113-HSJZ
MRE VERSION:3100

 

[pipicat6489]

Good Day!

Currently I'm sitting with a issue of " the flash id of MAUI BIN is not match to target phone flash!
please check MAUI load is build correctly and fits this target. " when using flash tool to update my watches firmware.

Here's the following details I have according to my smartwatch.

*#8375#

Version : XML_61D_MRC_COB_W88_B_RQ_TN_20170308-V5.310
Branch: 11C
UMEOX61D_BT_11C


*#00000000#
SSC Info:


MTK Soft Ver: 0x1303
MTK HW Ver: Unknown
Ver: 0X74
UsrId: 0
OsVern:
Model: XML_61D_MRC_COB
Company: F012
MaxRam: 665600
Kbd: 0
cAP:0X40010
FAE: LIUJUN
Build Date: 20170308
Build Time: 10:47
Os: MTK61D
MRE version: 3100


If anyone can provide me details regarding this exact watch maybe and how i can update the firmware on it and which firmware would be appropriate for it, I'd greatly appreciate it!

Thank You,

Demi.

Hi

i checked my watch's details, and legit, it was missing some details, but all the details you mentioned (FAE, company, etc,) was the same. so what i want to tell you, is you can flash any firmware. just google "DZ09 firmwares" and you get it!

i hope this will help

pipicat6489

 

[amir _miraki]

http://niezarmsan.blogspot.ro/2015/12/how-to-install-firmware-on-dz09-mtk6260.html

http://forum.xda-developers.com/sma.../readback-extractor-mtk6260-firmware-t3289272

gizmo advices is a good youtube with the dz09 watch

 

[Kirboopa11]

Hello guys, I am new to this platform, yesterday I got this DZ09 smartwatch, but this is a strange version, it does not bring any background, nor does it bring to change it, (I have an SD on) the apps are weird and the secret codes do not work, I want to install the ZW or the Gameapp but they do not work, I try to change the IMEI for the calls but no code works alone (* # 66 * #) this is the version of the DZ09

If someone can help me with this, I would appreciate it, because I do not understand this device

 

[amir _miraki]

With the Dz09 its cellular connective is 2G and the antenna would i be able to get a 3g antenna for this watch idk if it will work and is there any mods avabile for this smartwatch