Enable GPU 5th Step?

[AAccount]

I was looking around in the gpu driver files and I noticed that there was a hidden 5th 533MHz OC in there. I tried to enable it by copying in the "asv_3d_volt_9_prime" table in for the "non-prime" table. I made sure to remove the -1 in the non prime's table so it wouldn't think the extra voltages for 533MHz was out of bounds. I made sure to comment out these crippling lines:

/*if ((samsung_rev() < EXYNOS4412_REV_2_0) && (maliDvfsStatus.currentStep == 3)) 
			{
				level=get_mali_dvfs_status();
			}*/ //a crippling check for "prime" note 2?

I also (after looking at siyah's kernel) copied in the entries for the step4 sysfs variables into mali_kernel_linux.c but my cell phone seems to be bent on not giving me this 5th step.

Sorry again for asking a question that's probably obvious to elite developers. Oh and thank you for answering my question on adding frequencies to the cpu. I now have my own (not copy and pasted :cyclops: ) lines in there to give me 2OC frequency and 1 underclock frequency.

 

[AndreiLux]

Where's that code snippet from? Anyway it's not related to the limiting if the 5th step.

 static mali_bool mali_dvfs_table_update(void)
{
unsigned int i;
unsigned int step_num = MALI_DVFS_STEPS;

//if (samsung_rev() < EXYNOS4412_REV_2_0)
//step_num = MALI_DVFS_STEPS - 1;

Just comment out those two lines in the DVFS decision making and it should scale up to 5 steps.

 

[AAccount]

Where's that code snippet from? Anyway it's not related to the limiting if the 5th step.

 static mali_bool mali_dvfs_table_update(void)
{
unsigned int i;
unsigned int step_num = MALI_DVFS_STEPS;

//if (samsung_rev() < EXYNOS4412_REV_2_0)
//step_num = MALI_DVFS_STEPS - 1;

Just comment out those two lines in the DVFS decision making and it should scale up to 5 steps.

I tried that already. It didn't work. The code snippet I pasted comes from the same file.