@Englezos
Hello, I just dirty flashed your r21 build in orangefox 9 recovery over r20 (ROM PE CAF latest) while flashing in recovery a line like 'failed to mount cust device or resource busy' showed up. So, I formated my phone and wiped all partitions, then flashed same rom, magisk and r21. Same line showed up again. However, both times kernel seemed to be installed successfully, and I didn't notice any problems using my phone. Can you please look into this. Thank you.
Hello, I just dirty flashed your r21 build in orangefox 9 recovery over r20 (ROM PE CAF latest) while flashing in recovery a line like 'failed to mount cust device or resource busy' showed up. So, I formated my phone and wiped all partitions, then flashed same rom, magisk and r21. Same line showed up again. However, both times kernel seemed to be installed successfully, and I didn't notice any problems using my phone. Can you please look into this. Thank you.
No need to worry its a warning from that particular recovery. Either way as you said the kernel does installs successfully.
Set input boost duration to 0.
I supposed to change input interval to 0ms and disable input boost frequency right, i dont see any input boost duration in kernel auditor, or am i have to use other app ?
Attachments
Ouch i though it supposed to be "input boost interval" for me to change, thanks
---------- Post added at 10:43 AM ---------- Previous post was at 10:37 AM ----------
also is there any disadvantage when turning input boost off ? the advantage i heard is having a bit more battery time,so i would want to know if there any disadvantage
Can confirm. I noticed some micro stutters when scrolling in Chrome, YouTube, and the official Twitch app.
Englezos r21 - input boost enabled (1401MHz, 850ms), LOS 15.1, Magisk 19.3.
Saw any difference between the stock lineage kernel and this kernel with charging and performance ?
I personally saw difference with performance , dont know about charging with r21 . How's the charging in r21 ? And can u please test antutu benchmarks of r21 ? Am using the same rom LOS 15.1 .
Btw my antutu benchmarks are this --
Englezos r20 (3.18.140) --- 79243 (Set to PERFORMANCE)
Lineage (3.18.71) --- 82458 . (Set to PERFORMANCE)
R22
Englezos Kernel r22 - 24-06-2019
Group: @Englezos
Download:
https://github.com/penglezos/androi...3/releases/download/22/EnglezosKernel-r22.zip
Changelog:
- Synced with android-3.18 latest changes
- Synced with latest LA.UM.7.5.r1-05300-8x96.0 CAF Tag
- Upstreamed Devfreq boost driver to latest changes
- Reconfigured devfreq boost driver frequencies to more efficient one
- AnyKernel3 flashing mechanism updated to latest
- Boost cpubw devfreq device when a new frame is ready
XDA Thread:
https://xdaforums.com/redmi-note-4/...elopment/kernel-englezos-r1-oreo-8-1-t3825452
Englezos Kernel r22 - 24-06-2019
Group: @Englezos
Download:
https://github.com/penglezos/androi...3/releases/download/22/EnglezosKernel-r22.zip
Changelog:
- Synced with android-3.18 latest changes
- Synced with latest LA.UM.7.5.r1-05300-8x96.0 CAF Tag
- Upstreamed Devfreq boost driver to latest changes
- Reconfigured devfreq boost driver frequencies to more efficient one
- AnyKernel3 flashing mechanism updated to latest
- Boost cpubw devfreq device when a new frame is ready
XDA Thread:
https://xdaforums.com/redmi-note-4/...elopment/kernel-englezos-r1-oreo-8-1-t3825452
conservative or interactive. what is the default?
It says interative is default in OP, but my phone says it's conservative(have never touched any options)
It says interative is default in OP, but my phone says it's conservative(have never touched any options)
It's interactive, probably you did not clean flashed meaning you flashed and run another kernel before flashing mine.
No, you'll first have to flash the boot.img (the stock kernel of the ROM), only then can you flash any other kernel.
Are you sure? I've always flashed kernels over kernels and never encountered problems because of that. It's just replacing .img on boot partition.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
102Hi all,
The main priority of this kernel is to stay always up-to-date with latest android-linux-stable, CAF, and/or Linux kernel changes. I want to keep things as simple and minimal as possible. The kernel is also focusing on battery life while maintaining performance!
Note: This kernel is compatible with Android 8-10 Treble.This kernel is not compatible with MIUI, actually it will never be.
Features:
- Latest CAF msm-3.18 kernel fully merged
- ext4, f2fs, sdFAT, vfat and exFAT support
- Sound control, display control (KCAL) adjustments and vibration strength control
- CPU governors: interactive, conservative, performance
- CPU and GPU frequencies are kept stock. (CPU 652/2016. GPU 133/650)
- I/O schedulers: bfq, noop, deadline, cfq
- TCP Algorithms: cubic, reno, westwood
- Input (touch) boost is enabled by default and it is also user configurable
- Power efficient workqueues and idle power consumption is reduced to the absolute minimum
- ZRAM support with many implementations for all phone variants
- SafetyNet bypass code
- TTL Target / IP Mangle Support
- CRC32 & SHA256 crypto algorithms
- Excluded all debugging symbols for kernel size reduction
- Many more under the hood improvements, the code speaks for itself.
How to install:
You can install this kernel by flashing it through your favorite recovery (TWRP, OrangeFox, etc).
Please do a clean installation of this kernel (flash you roms boot.img first) in order to avoid any issues.
Changelog:
Kernel changelogs can be obtained by visiting this link:
Downloads:
Kernel Sources:
If you like this kernel and want to support it feel free to donate!
Donate via PayPal
Credits:
- The Linux Foundation, CAF
- @abhishek987 (without him nothing would be possible)
- @nathanchance (for always providing the latest stable linux/caf changes! android-linux-stable rocks!)
- @franciscofranco (for keeping things simple and detailed)
- @krasCGQ (appreciate his well described commits, he helped me a lot to understand several things about kernels)
- @osm0sis (for his amazing anykernel2 script)
- All Redmi Note 4(X) (mido) developers and users,
- All others who have their commits or contributions picked.
34R25 - EOL
Englezos Kernel r25 [END OF LIFE] - 10/09/19
[Probably a final build at that time being since this project is complete with 25 solid releases plus 3.18 is dead. Currently moved into a new device BUT if anything intresting pops up into mido community I will hop back so no worries. Mido is still in my existance for those who are curious.]
Download:
https://github.com/penglezos/androi...3/releases/download/25/EnglezosKernel-r25.zip
Changelog:
- Synced with latest android-3.18 latest changes
- Synced with latest CAF changes
- Added support for Android 10
If you like this kernel and want to support it feel free to donate! Donate via PayPal30Birthday Release R8!
Time for a new release, on my birthday!!
Changes over r8:
- Upstream Linux version tag: 3.18.124
- Upstream CAF: LA.UM.6.6.r1-09900-89xx.0
- Upstream prima: LA.UM.6.6.r1-09900-89xx.0
- Upstream ANDROID: sdcardfs
- Kernel rebase: many placebos removed, code cleaned
- Conservative governor tweak and upstreams
- Default governor: Conservative
- Fixed ZRAM stuff
- Apps loading even faster
- Better memory managment
- FK performance profiles upstream
- Englezos kernel tweaks and parameters on ramdisk
- Many more small fixes
Downloads:
Join our telegram group to stay updated, give ideas and download beta versions!
https://t.me/englezos30Time for a new release!!
Changes over r5:
- Upstream Linux version tag: 3.18.121
- Vendor mismatch warning: fixed
- Upstreamed darkness governor; added some personal tweaks also
- Enabled NTFS support
- Enabled exFAT support
- Disabled userspace, ondemand governors
- Removed blu_active governor
- wl_blocker: add more wakelocks to the default block list
Downloads:
Join our telegram group to stay updated, give ideas and download beta versions!
https://t.me/englezos26New Release!!
Time for a new release!!
Changes over r4:
- Upstream Linux version tag: 3.18.120
- Upstreamed CAF tag: LA.UM.6.6.r1-09600-89xx.0
- Upstreamed prima tag: LA.UM.6.6.r1-09600-89xx.0
- Disabled modules: since we dont use any, automatically enhance some security flaws (On some roms you might get 'mismatch vendor warning' since rom developers didn't implemented that. It's not something to worry just click okay. Although I'm working to completely remove it.
- Upstreamed WireGuard
- Reduced Kernel size
Downloads:
Join our telegram group to stay updated, give ideas and download beta versions!
https://t.me/englezos
