[EOL][11.0][OFFICIAL] LineageOS 18.1 for Oneplus 5 & 5T

[capdcanoa]

1- Enable Local terminal in Developper options
2- Open Terminal app & then type “su” and press Enter. This will grant Superuser Rights to the app.
3- Next, type “props” & press Enter.
4- Choose “Edit Device Fingerprint” ... type "1" & press Enter
5- Choose "Pick a certified fingerprint" ... type "f" press Enter
6- Choose "Oneplus" ... type "21" press Enter
7- Choose "Oneplus 5T" ... type "7" press Enter .... ("6" for "OnePlus 5")
8- Choose "Android version 10" ... type "5" press Enter
9- If you have followed everything above & selected the right options, type "y" & press Enter ...
10- Type "y" & press Enter ... Now, your device will reboot.

Now SafetyNet test will be OK.

Thank you @Pizzini. I have been trying for so long.

Great to see you again, we had good times in ECDLG

 

[capdcanoa]

Searching the thread for word safetynet would have answered the question

Thanks a lot. I have been trying and searching for months, and now it's working!!!

 

[j10hx40r]

Facing an issue on the latest build of lineageos for 5t.

Updated lineage os on my 5t to the latest build from the build before. Now if I make a call and enable speaker, after a second or two, the screen goes black and the sound also stops coming. I have to forcefully restart the phone to recover from that state.

Anyone else facing the same issue?

 

[LV198]

Facing an issue on the latest build of lineageos for 5t.

Updated lineage os on my 5t to the latest build from the build before. Now if I make a call and enable speaker, after a second or two, the screen goes black and the sound also stops coming. I have to forcefully restart the phone to recover from that state.

Anyone else facing the same issue?

No, don't have this issue. Calling works fine for me.

 

[j10hx40r]

No, don't have this issue. Calling works fine for me.

Thats wierd. Any steps I can do to troubleshoot the issue?

Here is what I am doing right now.

1) Dial a number
2) before the call gets picked up, enable speaker mode

I have reproduced the issue with and without wifi turned on. If I don't enable speaker mode, the phone keeps working. But if I enable speaker when dialing, the screen goes black

 

[LV198]

Thats wierd. Any steps I can do to troubleshoot the issue?

Here is what I am doing right now.

1) Dial a number
2) before the call gets picked up, enable speaker mode

I have reproduced the issue with and without wifi turned on. If I don't enable speaker mode, the phone keeps working. But if I enable speaker when dialing, the screen goes black

Just tried the same and phone still works perfectly for me.

Do you use the stock phone application? If so, have you already tried whether the issue also appears when using for example the Google Phone application from Google Play?

 

[j10hx40r]

Just tried the same and phone still works perfectly for me.

Do you use the stock phone application? If so, have you already tried whether the issue also appears when using for example the Google Phone application from Google Play?

Not sure if dialer I am using is stock or Google phone. The package name is com.android.dialer

Will check with Google's phone application from google play.

 

[LuisCarlosHK]

Is there anyone have boot loop problem after flash magisk 24.1?

 

[HoaXxX]

24.1 seems to work fine here. flashed via magisk manager, rebooted straight from the app. app tells me that it's up2date now.

 

[LuisCarlosHK]

24.1 seems to work fine here. flashed via magisk manager, rebooted straight from the app. app tells me that it's up2date now.

I tried with and without patch vbmeta in boot image. Both result in bootloops.

 

[daywalk3r666]

remove the magisk addon.d script then flash the rom and magisk dirty

 

[madman]

I tried with and without patch vbmeta in boot image. Both result in bootloops.

I flashed 24.1 zip through TWRP and it worked just fine.

 

[LuisCarlosHK]

I flashed 24.1 zip through TWRP and it worked just fine.

I also tried flash 24.1zip through lineageos recovery and result in bootloops too.

 

[LuisCarlosHK]

remove the magisk addon.d script then flash the rom and magisk dirty

problem solved

 

[Scream275]

I recently bought a OnePlus Watch, which is working pretty good so far. Unfortunately, it complains about missing ephemeris data to speed up the location lock. I can only guess that the companion app can't find this kind of data in the filesystem/database of the OS. Is it possible to debug this somehow?

Nevertheless, I tried to dig into this and noticed that my OnePlus 5T (latest 18.1 build from 25. Jan. 2022) is only using GPS satellites to gain a position lock, even though it sees other satellite systems, like Glonass and Galileo. I used the app GPSTest to see which satellites it locks onto, and these are GPS satellites only. Do other people encounter the same behaviour/issue? If yes, is this fixable by the ROM maintainer?

Screenshots: created while being outside and at different times of the day (it's been cloudy). The bold border indicates used satellites.

EDIT: I reported the GPS issue to the lineage issue tracker under https://gitlab.com/LineageOS/issues/android/-/issues/4381

 

[nicfio]

Hi all, how is the battery drain with latest lineageos releases? Thanks!

 

[kennyFF92]

I've installed Magisk Props and kdragon's module but safetynet is not passing, how did you manage to solve this problem with magisk 24.1 on 5T?

 

[madman]

I've installed Magisk Props and kdragon's module but safetynet is not passing, how did you manage to solve this problem with magisk 24.1 on 5T?

Which kdragon module you installed exactly? Magisk 24.1 comes with a new feature called zygisk.

Things I did on multiple devices to get this working

1. Enabled zygisk in Magisk settings
2. Download zygisk version of kdragon's module,
3. Enabled DenyList feature in Magisk settings,
4. Add usual suspects in DenyList (Google Play Services, banking apps, Play Store, Google Pay)
5. Magisk Props to fake a valid signature.
6. Reboot.
7. Check status with YASNAC

 

[indiandragon]

Which kdragon module you installed exactly? Magisk 24.1 comes with a new feature called zygisk.

Things I did on multiple devices to get this working

1. Enabled zygisk in Magisk settings
2. Download zygisk version of kdragon's module,
3. Enabled DenyList feature in Magisk settings,
4. Add usual suspects in DenyList (Google Play Services, banking apps, Play Store, Google Pay)
5. Magisk Props to fake a valid signature.
6. Reboot.
7. Check status with YASNAC

May I ask is there anything you're missing with new zygisk basked Magisk? How are you handling root if you were using one.

 

[kennyFF92]

Which kdragon module you installed exactly? Magisk 24.1 comes with a new feature called zygisk.

Things I did on multiple devices to get this working

1. Enabled zygisk in Magisk settings
2. Download zygisk version of kdragon's module,
3. Enabled DenyList feature in Magisk settings,
4. Add usual suspects in DenyList (Google Play Services, banking apps, Play Store, Google Pay)
5. Magisk Props to fake a valid signature.
6. Reboot.
7. Check status with YASNAC

This is the module I was talking about: https://github.com/kdrag0n/safetynet-fix

I think that with Props it helps pass the SafetyNet. I missed the deny list part, thank you

May I ask is there anything you're missing with new zygisk basked Magisk? How are you handling root if you were using one.

You miss MagiskHide (you can use the Zygisk deny list as an alternative) and the modules repo (you should download the modules manually from the web and install them in the Magisk app)