[EOL] [KERNEL] [AOSP/Samsung/Ports] [ArchiToolchain 5.2] [01/10/15] ArchiKernel V2.1

Search This thread
By:
Advanced…
S

Steel-Blade

Member
Jun 23, 2012
14
0
Hi, I don't know if this was answered before, the topic is to big to search for it.
Does this kernel addresses the "insane chip" problem that the early i9300 have?


regards
 
sunny1234590

sunny1234590

Senior Member
Feb 15, 2014
1,326
707
Greater Noida
DaVish3K said:
@sunny1234590 Just read. Read. R-E-A-D.
The kernel is EOL and there's nothing in the description regarding CM13 support.

Just. Read.
Click to expand...
Click to collapse

Well, I thought anykernel zip files extracts the RamDisk image from the system itself. Also, Archi himself mentioned that it might work with latest builds.
So, just wanted to know if someone tried it. If you had no response then you should not even reply.
 
JustArchi

JustArchi

Inactive Recognized Developer
Mar 7, 2013
8,739
38,807
Warsaw
sunny1234590 said:
Well, I thought anykernel zip files extracts the RamDisk image from the system itself. Also, Archi himself mentioned that it might work with latest builds.
So, just wanted to know if someone tried it. If you had no response then you should not even reply.
Click to expand...
Click to collapse

It should work if CM13 has working SELinux.

If it doesn't, sorry, I do not plan on adding anything here anymore.
 
ste22032

ste22032

Senior Member
Dec 27, 2010
369
359
31
Como
Just tried flashing latest ArchiKernel 2.1 AOSP on CyanogenMod 13, but unfortunately it stucks on Samsung Galaxy S3 logo and then phone reboots in recovery mode. CM13 uses Enforcing SELinux, but probably it's not completely working.
 
  • Like
Reactions: VanXamar
M

MD500

Senior Member
Mar 25, 2013
486
103
Why i am receiving this error archi???? I'm 4.3 Sammy ROM uploadfromtaptalk1450811983233.jpg

Enviado desde mi GT-I9300 mediante Tapatalk
 
VanXamar

VanXamar

Senior Member
Jul 16, 2012
199
53
ste22032 said:
Just tried flashing latest ArchiKernel 2.1 AOSP on CyanogenMod 13, but unfortunately it stucks on Samsung Galaxy S3 logo and then phone reboots in recovery mode. CM13 uses Enforcing SELinux, but probably it's not completely working.
Click to expand...
Click to collapse

I tried on cm13 build 24. Too bad it didn't work. Was really hoping for it.
 
jagoan_neon

jagoan_neon

Senior Member
Sep 17, 2013
88
14
Palu
i got this
2016-02-16 20:37:47 WARNING: I looped 600 times and needed to exit from infinite loop, not good (Init Semaphore)
2016-02-16 20:37:47 INFO: SOFT_REBOOT_REQUIRED, I'm rebooting android interface now...

help？
 
kojak1989

kojak1989

Senior Member
Nov 1, 2013
1,133
163
why i can see only black screen in Synapse ? i flashed 2.1 SAMSUNG NEW on back to n00t.

Edit: FIXED.
 
Last edited:
You must log in or register to reply here.

Similar threads

JustArchi
[EOL] [ROM] [5.1.1] [CyanogenMod] [GCC 4.9] [Excellent] [12/11/15] ArchiDroid V3.1.5
Replies
17K
Views
4M
3dward87
3dward87
andip71
  • Locked
[EOL] [KERNEL] [I9300] [Samsung JB] Boeffla-Kernel 5.11/6.9/7.9 (23-10-2015)
Replies
16K
Views
3M
F
funkenwerner
JustArchi
[5.0.2] [EOL] [Weekly 10/Nightly] [2015-04-01] CyanogenMod 12 for i9300
Replies
11K
Views
3M
Nouatik
Nouatik
temasek
  • Locked
[CM11][4.4.2][i9300][ROM][KERNEL][FEB26] temasek's UNOFFICIAL Build - V50
Replies
59K
Views
9M
MikeChannon
MikeChannon
andip71
  • Locked
[EOL] [KERNEL] [I9300] [Lineage14/CM13,12,11,10/Omnirom] Boeffla-Kernel (28-03-2018)
Replies
10K
Views
2M
andip71
andip71

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 261
    JustArchi
    JustArchi
    linux-logo-600x300.png


    • Base: N7100 KK Sources
    • Linux 3.0.31
    • Compiled using latest ArchiToolchain 5.2.0
    • ArchiDroid Optimizations
    • Using AnyKernel method (compatible with all ROMs for both AOSP and Samsung)
    • And many other awesome things I have no time to list

    ArchiDroid Optimizations:
    - Fully optimized for Samsung Galaxy S3 (-marm -march=armv7-a -mcpu=cortex-a9 -mtune=cortex-a9 -mfpu=neon -mfloat-abi=softfp)
    - Compiled with O3 optimization level (-O3)
    - Performed interprocedural pointer analysis and interprocedural modification and reference analysis (-fipa-pta)
    - Performed loop invariant motion on trees. It also moved operands of conditions that are invariant out of the loop, so that we can use just trivial invariantness analysis in loop unswitching. The pass also includes store motion (-ftree-loop-im)
    - Created a canonical counter for number of iterations in loops for which determining number of iterations requires complicated analysis. Later optimizations then may determine the number easily (-ftree-loop-ivcanon)
    - Performed induction variable optimizations (strength reduction, induction variable merging and induction variable elimination) on trees (-fivopts)
    - Tried to reduce the number of symbolic address calculations by using shared “anchor” symbols to address nearby objects. This transformation can help to reduce the number of GOT entries and GOT accesses on some targets (-fsection-anchors)
    - Assumed that loop indices do not overflow, and that loops with nontrivial exit condition are not infinite. This enables a wider range of loop optimizations even if the loop optimizer itself cannot prove that these assumptions are valid (-funsafe-loop-optimizations)
    - Moved branches with loop invariant conditions out of the loop (-funswitch-loops)
    - Attempted to avoid false dependencies in scheduled code by making use of registers left over after register allocation. This optimization most benefits processors with lots of registers (-frename-registers)
    - Re-ran common subexpression elimination after loop optimizations are performed (-frerun-cse-after-loop)
    - Didn't keep the frame pointer in a register for functions that don't need one. This avoids the instructions to save, set up and restore frame pointers; it also makes an extra register available in many functions (-fomit-frame-pointer)
    - Made a redundant load elimination pass performed after reload. The purpose of this pass is to clean up redundant spilling (-fgcse-after-reload)
    - Ran a store motion pass after global common subexpression elimination. This pass attempts to move stores out of loops (-fgcse-sm)
    - Eliminated redundant loads that come after stores to the same memory location, both partial and full redundancies (-fgcse-las)
    - Constructed webs as commonly used for register allocation purposes and assigned each web individual pseudo register. This allows the register allocation pass to operate on pseudos directly, but also strengthens several other optimization passes, such as CSE, loop optimizer and trivial dead code remover (-fweb)
    - Performed tail duplication to enlarge superblock size. This transformation simplifies the control flow of the function allowing other optimizations to do a better job (-ftracer)
    Click to expand...
    Click to collapse

    Download


    What to expect:
    - Awesome stock battery life on AOSP ROMs (due to Samsung sources and not smdk4x12)
    - Blazing fast (Deep advanced optimizations, Linaro toolchain, this is the beast)
    - High compatibility (AnyKernel method, the kernel should work on all ROMs)

    What to expect in future:
    - You tell me

    What to NOT expect:
    - Many CPU or I/O governors # We don't need overhead, you can achieve nearly the same just by tweaking governor to your needs
    - Features I don't like/need
    - Dualboot (see above ^)
    - F2FS (see above ^, however this one depends on kernel upstreaming, as f2fs is merged)

    ArchiKernel is provided in 4 different variants, 2 for AOSP ROMs and 2 for SAMSUNG ROMs.

    AOSP -> 29 MALI blobs AOSP variant. Should cover all Lollipops for SGS3.
    AOSP_OLD -> 23 MALI blobs AOSP variant. Should cover all KK and pre-KK ROMs for SGS3.
    SAMSUNG -> 23 MALI blobs Sammy variant. Should cover all JB ROMs and also some KK ROMs based on N7100 port (such as ArchiPort)
    SAMSUNG_NEW -> 29 MALI blobs Sammy variant. Should be used only on KK+ Sammy ROMs based on korean port

    ArchiKernel is using my own AnyKernel flashing method, therefore it does not suffer from a need to update it with maintenance ramdisk updates, and that's one of the reason why it should work properly with all ROMs, even those not officially supported, as long as variant matches.

    Flashing instructions:
    1. Make sure that you have stock kernel already flashed (the one which comes with your ROM), if you're running custom kernel already, reflash your ROM without wipe, this will also flash stock kernel. This is ultimately important, DON'T FLASH ARCHIKERNEL ON ANOTHER CUSTOM KERNEL, you may face various issues you've never seen before.
    * This is because ArchiKernel uses AnyKernel method - it pulls ramdisk from your current kernel. If you brick your phone by flashing AK on top of custom kernel, you know who will be responsible for that.
    2. Flash ArchiKernel zip.
    3. Profit!

    Updating instructions:
    1. If you arleady have older ArchiKernel version flashed properly with above instructions, and changelog doesn't state otherwise, just flash the .zip with new version of AK.
    2. No wipes, cleaning dalvik cache or anything else is required, flashing zip is enough.
    3. Profit!

    Bugs:
    None known

    XDA:DevDB Information
    [EOL] [KERNEL] [AOSP/Samsung/Ports] [ArchiToolchain 5.2] [01/10/15] ArchiKernel V2.1, Kernel for the Samsung Galaxy S III I9300

    Contributors
    JustArchi, Moster2
    Source Code: https://github.com/ArchiDroid/ArchiKernel

    Kernel Special Features:

    Version Information
    Status: No Longer Updated

    Created 2014-06-17
    Last Updated 2015-11-12
    View
    112
    arter97
    arter97
    Okay.

    After a second thought, yes, I'm releasing my Git repository open for everyone.

    You guys are right. It's about the entire community, not me.

    It's the entire community we want to improve, not a specific one or a group.

    I'd like to contribute to the community.
    I'd like to see other developers take commits from this repository and make things better.

    The Git is at https://bitbucket.org/arter97/arter97-i9300-release

    So,
    @JustArchi , go fix your kernel's camera issue and delight the users.
    @Lord Boeffla , let's both work on improving Knock-On(or dt2w).
    @beeeto , thanks for persuading me.

    We love XDA.
    We love to share things and make things better.

    Me too. I love to apply things from other developers.
    But with proper credits.

    I'd like to see other developers take commits from this repository and make things better.
    Contribute to the entire community.

    But with proper credits.

    'Opensource' does not mean 'no-respect'.
    Leave credits to original author.

    That's all I want.

    Thanks for your support.
    View
    49
    JustArchi
    JustArchi
    ArchiKernel V1.5

    Linaro toolchain update, 4.9.1 -> 4.9.2, 14.07 -> 14.09
    - SEA2 -> Update14 (really misc update from samsung)
    - Added BFQ scheduler # Thanks to @Moster2
    - STweaks: ZRAM, BFQ, Knock-on corrections, Sharpness tweak and more misc bugfixes/improvements # Thanks to @Moster2
    - Added ArchiKernel logo after booting of the kernel
    - Silenced some more debug informations (including touchscreen)
    - Updated ZZmoove to 0.9 beta4
    - Merged N8000 sources for all variants (this should fix graphical glitches for ArchiPort and other ported Sammy ROMs, AOSP also benefits from that) # Thanks to @LordBoeffla
    - Fixed graphical glitches on AOSP ROMs which happened after above merge # BIG THANKS to @Moster2
    - Many R4P0 fixes and improvements # Thanks to @Moster2
    - Fixed sharpness tweak # Thanks to @Moster2
    - Added some misc LD optimizations (-Wl,--sort-common + -Wl,--O1)
    - More on github
    Click to expand...
    Click to collapse

    Download, changelog, and cookies

    I've moved downloads and changelogs to github, as it should be more reliable than XDA servers. Also you can get updates just by watching github repo.

    Please let me know if you find any issues, I tested only AOSP variant due to lack of time recently, however, AK is using unified tree so it's very unlikely that other variants will see any issues.

    Have fun and don't forget to SMASH THAT THANKS BUTTON FOR MOSTER2, as he's doing more than me for this kernel lately! Not even mentioning that N8000 merge works on AOSP fully thanks to him (I'd simply revert it otheriwse).

    Yes, I guess this is the only AOSP kernel with kitkat sources right now. Andi made a perfect commit with N8000 additions for his ArchiPort Boeffla, I merged it and resolved the conflicts, while Moster2 fixed graphical glitches on AOSP, I love this community :).
    View
    47
    JustArchi
    JustArchi
    ArchiKernel V1.3


    [SIZE="+1"]Changelog is strong with this one :cool:.[/SIZE]


    Changelog

    ArchiKernel V1.3

    - Enabled LED fading/blinking support @Moster2
    - Enabled haptic control on AOSP roms like CM/Omni @Moster2
    - Enabled voltage control of the CPU @Moster2
    - Enabled overclocking of the CPU to 1600Mhz @Moster2
    - Enabled GPU clock control and voltage interface @Moster2
    - Enabled touch LED control @Moster2
    - Updated ZZmoove to 0.9 beta3 @JustArchi
    - Enabled SELinux @JustArchi
    - Enabled ext4 security labels @JustArchi # This fixes being unable to mount ext4 sd cards, reported by @Senior_Limpio
    - Enabled OC by default @JustArchi # This enables 1600 MHz by default, you can still go back to 1400 via sysfs
    - Fixed CVE-2014-3153 @JustArchi
    - Fixed frequency slider in performance settings @JustArchi # Found i.e. in Omni
    - Cleanup of ArchiKernel settings @JustArchi

    BIG thanks to @Moster2 for backporting features in a clean and professional way!



    Download
    Remember to flash ArchiKernel on top of Stock kernel for your ROM (fresh install) OR on top of older ArchiKernel (update).


    Have Fun! :cool:
    View
    39
    Moster2
    Moster2
    @JustArchi, the graphical glitches with the new sources should be fixed now. Finally had some time and will to fix it :D
    View

New posts