[EOL][KERNEL] [OnePlus2] [Lineage14/CM13] Boeffla-Kernel (27-03-2018)

Status
Not open for further replies.
Search This thread

abhijeet715

Senior Member
Apr 9, 2015
911
255
Muscat
@Lord Boeffla was using your kernel on official LOS14.1, my phone was plugged in all night and when i unlocked it in Morning i saw it had soft rebooted (boeffla config had given the profile applied message and it was mentioned there that profile applied after soft reboot)

Can you please check the logs as well. I am using xposed (i know i shouldn't be expecting support) but can you just tell me whether this problem is due to xposed or something else :)

Thanks
 

Attachments

  • 2017-10-14_10.09.zip
    117 KB · Views: 5

andip71

Recognized Developer
Apr 22, 2008
17,094
67,644
Potsdam
www.boeffla.de
@Lord Boeffla was using your kernel on official LOS14.1, my phone was plugged in all night and when i unlocked it in Morning i saw it had soft rebooted (boeffla config had given the profile applied message and it was mentioned there that profile applied after soft reboot)

Can you please check the logs as well. I am using xposed (i know i shouldn't be expecting support) but can you just tell me whether this problem is due to xposed or something else :)

Thanks

I cannot find anything useful after quickly checking the logs.

A soft reboot however comes from rom or app side, never the kernel (a kernel panic would trigger a full reboot).

And yeah, you have something on your phone which is known to cause issues like that easily, not more to say :)

Andi
 
  • Like
Reactions: ThaRealSaad

abhijeet715

Senior Member
Apr 9, 2015
911
255
Muscat
I cannot find anything useful after quickly checking the logs.

A soft reboot however comes from rom or app side, never the kernel (a kernel panic would trigger a full reboot).

And yeah, you have something on your phone which is known to cause issues like that easily, not more to say :)

Andi

I have disabled greenify now, and am gonna hard reset my phone and gonna go for a fresh install, google play is also causing issues such as not responding, timeout and error 927 even when im totally on stock without anything, i dont konw why but google is and has always been a PITA

---------- Post added at 11:12 AM ---------- Previous post was at 10:38 AM ----------

@Lord Boeffla small question, has the option to set the charging current (mAh) option been disabled from the app/rom. last time i remember I had seen it on the boeffla kernel for cm13, i dont remember whether i had seen it on los14 (or it is available), so just asking. Using official LOS14.1

Edit: Just saw the wiki regarding the charging rate, my phone model is not written there so I am supposing that it has been disabled in LOS14.1. Can I know why (out of personal curiosity, i dont konw why i need answers for everyhting lol :silly:)
 
Last edited:

andip71

Recognized Developer
Apr 22, 2008
17,094
67,644
Potsdam
www.boeffla.de
Edit: Just saw the wiki regarding the charging rate, my phone model is not written there so I am supposing that it has been disabled in LOS14.1. Can I know why (out of personal curiosity, i dont konw why i need answers for everyhting lol :silly:)

Yes, mentioned even in the change log. Charging was always a bit an issue on the OP2 and it turned out the driver in the end caused more bad than good. So I removed it a while ago to provide best stability of charging for everyone.

Andi
 

andip71

Recognized Developer
Apr 22, 2008
17,094
67,644
Potsdam
www.boeffla.de
Hi all,

I want to inform you, I am going on a 3.5 weeks holiday to sunny Florida basically right now. I am back Monday, 20th of November again.

This means:
- No kernel or app updates in the next 3.5 weeks
- I am also not reading forums at all, nor will I answer questions here
- Support requests by E-Mail will be answered after my return
- Donation codes will be generated, but maybe with some more delay

Have a good time, enjoy a "flash-free" time... and CU all again soon.

Andi
 

rotemakerman

Senior Member
Jul 15, 2011
262
30
Hi all,

I want to inform you, I am going on a 3.5 weeks holiday to sunny Florida basically right now. I am back Monday, 20th of November again.

This means:
- No kernel or app updates in the next 3.5 weeks
- I am also not reading forums at all, nor will I answer questions here
- Support requests by E-Mail will be answered after my return
- Donation codes will be generated, but maybe with some more delay

Have a good time, enjoy a "flash-free" time... and CU all again soon.

Andi
Thank you my lord!
Should we wait till next LOS before flashing?

Sent from my ONE A2001 using Tapatalk

---------- Post added at 02:48 PM ---------- Previous post was at 02:45 PM ----------

Hi all,

maintenance update for LOS 14.1 kernel is out:

Version 6.1-beta16
26.10.2017

  • Update: Updated with latest official LineageOS kernel commits as of 26.10.17, 08.00 CET
Enjoy
Andi
I was referring to this of course

Sent from my ONE A2001 using Tapatalk
 

andip71

Recognized Developer
Apr 22, 2008
17,094
67,644
Potsdam
www.boeffla.de
  • Like
Reactions: Seferi

abhijeet715

Senior Member
Apr 9, 2015
911
255
Muscat
@Lord Boeffla does the December 1 2017 (20171201) build have any kernel changes in git? I dont know much about how to read and understand things from github so I just wanted to clarify. I felt like there were some changes or so...


Edit: I guess I saw a few changes from before like older commits and didnt know so i posted here. nevertheless, sorry for the same I guess there's nothing much so i dont think an update is required :)
 
Last edited:

andip71

Recognized Developer
Apr 22, 2008
17,094
67,644
Potsdam
www.boeffla.de
@Lord Boeffla does the December 1 2017 (20171201) build have any kernel changes in git? I dont know much about how to read and understand things from github so I just wanted to clarify. I felt like there were some changes or so...


Edit: I guess I saw a few changes from before like older commits and didnt know so i posted here. nevertheless, sorry for the same I guess there's nothing much so i dont think an update is required :)

There were 3 commits done recently, but those will come in a new kernel beta provided tomorrow.

Andi
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 99
    ** Note: This kernel is end-of-life and will no more be maintained. There will be no LineageOS 15.1 or newer kernel be available anymore **

    Hi all,

    some of you know me from the other OnePlus (One and X) or Samsung devices areas, where I provide my kernels already for more than two years to OnePlus One, OnePlus Two, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, LineageOS, Cyanogenmod, Omnirom etc.)

    Please note:
    I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).

    Important notes

    When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !

    Make sure you flash the correct kernel version, depending on whether you really use LineageOS/CM or a different OS !!!

    Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.


    Compatibility

    Important: This kernel is only meant to be compatible with official LineageOS and nothing else.
    It is reported to NOT work fine specifically on Resurrection Remix roms, also some Seraph based roms are not compatible.

    So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
    I could not care less about it !!



    Support

    First read the FAQ section on the Homepage !!!

    Click here to learn about all possible kernel settings in the config app (quite outdated, as it is focused on S3 still).
    Click here to learn about using the config app (quite outdated, as it is focused on S3 still).

    I will refuse to give support if you do any undervolting and experience freezes or hot reboots.

    I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.

    I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.

    Otherwise, you can get in touch with me via the support e-mail address: [email protected]

    Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.


    Change logs

    (you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")

    Change log for LineageOS 14 kernel - Click here
    Change log for CM13 kernel - Click here


    Features

    • Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
    • Full integration with Boeffla-Config V2 (you need at least version 2.4.50 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
    • The two CPUs (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and hotplug profiles
    • Additional governors: Impulse, zzmoove, elementalx, conservative, ondemand
    • Additional schedulers: fiops, bfq, sio und zen
    • Hotplugging done by using stock core_ctl method
    • Many Hotplug tweak profiles (default are: little CPU always runs on 4 cores, big CPU runs on between 2 and 4 cores based on load)
    • Notification LED control (fading, speed, brightness)
    • Boeffla-Sound engine (Headphones volume configurable only)
    • Dynamic FSync (activated if screen on, deactived if screen off), configurable
    • Input boost frequencies and duration configurable, input boost switch
    • No CPU and GPU overclocking (also not planned)
    • No CPU and GPU voltage interface (also not planned)
    • GPU underclocking to 27 MHz possible
    • GPU boost implemented (4 levels)
    • msm_adreno_tz and simple_ondemand tweaked to better utilize low frequencies
    • Show CPU frequency usage per CPU and frequency in Boeffla-Config
    • Show GPU frequency usage per frequency in Boeffla-Config
    • KCal V2 Color control
    • Display backlight limits configurable (to avoid display brightness gets too low in some situations)
    • Display backlight dimmer
    • Swipe2wake gestures
    • Swipe2sleep gestures
    • Boeffla generic wakelock blocker V1.1.0 (documentation)
    • BCL (battery current limit) driver switchable (default is on)
    • SD card read ahead buffer configurable (default increased to 1024 kB)
    • Ext4 File system tweaks (default to on, can be disabled)
    • Thermal engine profiles (in system Tweaks section)
    • Kernel logger (dmesg) configurable
    • Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
    • USB charge rate bumped up to 900 mA
    • CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
    • NFS support (module)
    • NTFS support (module)
    • XBox support (module)
    • OTG-Ethernet support (module)
    • TCP Congestion changed to Westwood
    • Many additional TCP congestion algorithms activated to be used
    • Entropy values configurable
    • Hardware touch keys locked as long as screen is in use (touched) for better usability (default, but configurable)
    • init.d support (in /system/etc/init.d - set correct permissions!)
    • Automatic EFS backup
    • Integrated full busybox 1.27.2 (own compilation)
    • Safetynet: verifiedbootstate + additional flags removed
    • Kernel initialisation log file (with history of 3 log files)
    • Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
    • Rom flash survival mode configurable in Boeffla-Config
    • Google gcc 4.9 toolchain (64 bit) used for best stability
    • Always using latest CM13 Initramfs
    • Always based on latest CM13 kernel sources (http://github.com/CyanogenMod/android_kernel_oneplus_msm8994)

    Download

    For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
    www.boeffla.de


    History and design targets

    Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.

    Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.

    The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
    It aims more for a good mix of all, not sacrificing stability and functionality in the end.
    And - most important: It aims to stay quite close to stock !!!

    These design targets are also valid for the OnePlus kernel here!!!

    This said, I will definitely NEVER implement:

    • things I do personally not need
    • things I do not like
    • things that are in any way dangerous
    • anything which is highly experimental
    • f2fs - it is known to cause various issues and compatibility problems
    • custom hotplugging algorithms
    • a CAF based kernel
    • anything that requires upstreaming of kernel parts to a higher kernel major version
    So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.

    And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
    I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...


    Compatibility

    To reiterate it again: Flash the correct kernel depending on whether you are using LineageOS/CM or another rom !!!


    Configuration of the kernel

    To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.

    You need at least version 2.4.50 or higher for the OnePlus 2 Boeffla Kernels.

    Donation

    If you like my work, feel free to donate: Donation-Link

    If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.


    Source code

    All sources can be found in my Github repository: http://github.com/andip71


    Credits to developers

    Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:

    * ZaneZam
    * flar2
    * Grarak
    * Yank555
    * Hardcore
    * Chainfire
    * AndreiLux
    * Netarchy
    * Gokhanmoral
    * Simone201
    * Mialwe
    * Entropy512
    * Faux
    * Harunjo
    * FranciscoFranco
    * Ak

    ... I just hope I did not forget someone. If so, please let me know and I will add you of course.
    Thanks to all of you for your great work !!!

    Disclaimer

    *** As always - Flash on our own risk! ***

    Make sure you flash the correct version depending on your firmware version!

    I can and will not take any responsibility for bricked phones or lost data.

    It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.


    Cheers and enjoy
    Andi
    51
    Hi all,

    new things are coming up soon, I will change the complete concept of Boeffla-Kernel during start phase very soon (yes, I will move on to anykernel method).

    Hence, I release my kernels now as last stable releases following still the old concept (static ramdisk method).

    Version 5.0 stable
    04.07.2016

    • Note: This is the last version of this Boeffla-Kernel which comes with a static ramfisk.
      New kernel versions will work with a completely new concept (anykernel method).
    • Note: Only use this version on official CM13 nightlies
    • Note: You need at least version 2.2.51 of Boeffla-Config V2 to allow all functionalities to be available
    • Fix: Big CPU cluster hotplugging profile "min=2, max=4 (default)" fixed to not switch off cores when certain apps (i.e. camera) are started
    • Update: Ramdisk of official CM13.0 build of 04.07.16
    Enjoy
    Andi
    38
    Anykernel arrived

    Hi all,

    it is time for the first CM13 kernel with the new anykernel concept.

    Before you start, make sure you have read and understood the following:
    http://boeffla-kernel.de/index.php/7...new-anykernels

    If you ask questions which are addressed in this article, or you have issues which are a consequence of not reading the article, I will not answer. It is your responsibility to understand what you do BEFORE you do it.

    (and also read this for more background: http://boeffla-kernel.de/index.php/6...ernels-new-app)

    Side note:
    Although the kernel is now likely to be much more compatible with custom roms using CM basis, I will not change my support conditions at all. If you report an issue on a non-original CM rom, do not expect me to react (http://boeffla-kernel.de/index.php/support/support)

    Ensure you update to latest Boeffla-Config App 2.3.1 BEFORE you flash the new kernel !!!

    Enough threatening now, here we go:

    Version 5.1-beta1
    12.07.2016

    • Note: This is the first Boeffla-Kernel with the new anykernel concept.
      Make sure you read and understand the basics: Boeffla-Anykernel Know-How and New concept kernels/New app

    • Note: You have to use Boeffla-Config version 2.3.1 or newer in order to use all functionality !!
    • This kernel as exactly the same functionalities as the last stable kernel release
    Enjoy
    Andi
    38
    Hi all,

    small update to CM14.1 Boeffla-Kernel is out.

    Version 6.0-beta7
    20.12.2016

    • Change: Support for extended slider functions on certain custom roms
    • Fix: Rare CPU scaling issues fixed
    Enjoy
    Andi

    P.S. Thread remains closed.
    35
    Looking good so far...

    Hi all,

    I might release beta1 for official CM13 still today.

    So far testing is looking good.

    Screenshot attached.

    Andi
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone