[EOL] [KERNEL] [OnePlus3] [Lineage15/Lineage14/CM13] Boeffla-Kernel (01-03-2019)

Status
Not open for further replies.
Search This thread

andip71

Recognized Developer
Apr 22, 2008
17,094
67,644
Potsdam
www.boeffla.de
For some reason pocket mode sometimes stops working until you reboot the phone. Anyone else?

It is known to not be 100% stable as the fingerprint driver obviously sometimes has "his own opinion".

It would help if you would elaborate how you use pocket mode - with a rom supporting it, with the Boeffla Pocketmode app, whether you have removed the app from Battery Optimizations of Android etc etc etc.

But no, on my side I never faced a single occurance of this stopping.

Andi
 

sille

Senior Member
Oct 24, 2013
1,092
308
Amberg
Hey Andi,

im using your newest CM Kernel paired with the BJRR Rom from 03.11.
I have installed your kernel config app but not your pocketmode app.

Lets say, if im hiding the sensor of the phone (Pillow, whatever), it takes about 10 min and the FP scanner is offline. Unlocking manually fix it again, till im hiding the phone again.

BJRR has the pocketmode integrated, but problems only exist in the newest ROM 3/11 with your kernel, so i went back to 18/10 and it seems to work for now
 

andip71

Recognized Developer
Apr 22, 2008
17,094
67,644
Potsdam
www.boeffla.de
Hey Andi,

im using your newest CM Kernel paired with the BJRR Rom from 03.11.
I have installed your kernel config app but not your pocketmode app.

Lets say, if im hiding the sensor of the phone (Pillow, whatever), it takes about 10 min and the FP scanner is offline. Unlocking manually fix it again, till im hiding the phone again.

BJRR has the pocketmode integrated, but problems only exist in the newest ROM 3/11 with your kernel, so i went back to 18/10 and it seems to work for now

Maybe the rom has changed something that makes it incompatible now.

If so, I will not gonna change it again. This is a big hack anyways, and I never liked it.
However, with my own app it seems to work very decent. So I will keep it as it is.

Andi
 

sille

Senior Member
Oct 24, 2013
1,092
308
Amberg
Maybe the rom has changed something that makes it incompatible now.

If so, I will not gonna change it again. This is a big hack anyways, and I never liked it.
However, with my own app it seems to work very decent. So I will keep it as it is.

Andi

ah ok, then im going to test it with your App again and see if it works :)
 

andip71

Recognized Developer
Apr 22, 2008
17,094
67,644
Potsdam
www.boeffla.de
ah ok, then im going to test it with your App again and see if it works :)

Yes, check that out.

I just hope, the control for pocketmode in the rom can be disabled cleanly. Not that rom and app conflict with each other.

My app is - of course - tailored to be used on roms that do not have this support, like vanilla CM for instance.

Good luck
Andi
 
  • Like
Reactions: sille

ZeNiXxX

Senior Member
Apr 22, 2012
2,050
7,650
Yes, check that out.

I just hope, the control for pocketmode in the rom can be disabled cleanly. Not that rom and app conflict with each other.

My app is - of course - tailored to be used on roms that do not have this support, like vanilla CM for instance.

Good luck
Andi

For example ressurection remix rom has its own Pocketmod app. But you can simply freeze the app with titanium or any other apps. Than its for sure that there are not in conflict.
 

sille

Senior Member
Oct 24, 2013
1,092
308
Amberg
Yes, check that out.

I just hope, the control for pocketmode in the rom can be disabled cleanly. Not that rom and app conflict with each other.

My app is - of course - tailored to be used on roms that do not have this support, like vanilla CM for instance.

Good luck
Andi

according to the dev, flashing a custom kernel disables the pocketmode function. so hopefully there will be no conflict but we'll see

---------- Post added at 14:16 ---------- Previous post was at 14:08 ----------

For example ressurection remix rom has its own Pocketmod app. But you can simply freeze the app with titanium or any other apps. Than its for sure that there are not in conflict.

wait? what?
 

zzzhead

Senior Member
Dec 5, 2013
406
88
according to the dev, flashing a custom kernel disables the pocketmode function. so hopefully there will be no conflict but we'll see

---------- Post added at 14:16 ---------- Previous post was at 14:08 ----------



wait? what?
Which pocket app is that?
 

ZeNiXxX

Senior Member
Apr 22, 2012
2,050
7,650
according to the dev, flashing a custom kernel disables the pocketmode function. so hopefully there will be no conflict but we'll see

---------- Post added at 14:16 ---------- Previous post was at 14:08 ----------



wait? what?

if you're using the latest bbj than go to settings - apps and show all apps and scroll down to oneplus-pocketmod. If you delete or disable this you will see that pocketmod wont work anymore with ex-kernel
 
  • Like
Reactions: superiscch
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 87
    Hi all,

    some of you know me from the other OnePlus or Samsung devices areas, where I provide my kernels already for more than three years to OnePlus One, OnePlus Two, OnePlus X, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)

    Now I own a OnePlus 3 device and decided to port my kernels also to this device.

    Please note:
    I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).

    Important notes

    When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !

    Make sure you flash the correct kernel version, depending on whether you really use CM or a different OS !!!

    Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.


    Compatibility

    Important: This kernel is only meant to be compatible with official Cyanogenmod and nothing else.
    So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
    I could not care less about it !!



    Installation

    Read the install instructions in the support section on the Boeffla Site.


    Support

    First read the FAQ section on the Homepage !!!

    Click here to learn about all possible kernel settings in the config app (quite outdated, as it is focused on S3 still).
    Click here to learn about using the config app (quite outdated, as it is focused on S3 still).

    I will refuse to give support if you do any undervolting/overclocking and experience freezes or hot reboots.

    I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.

    I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.

    Otherwise, you can get in touch with me via the support e-mail address: [email protected]

    Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.


    Change logs

    (you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")

    Change log for LineageOS 14.1 kernel - Click here
    Change log for CM13 kernel - Click here


    Features

    • Note: This kernel only runs on LineageOS for the OnePlus 3 - nothing else !!!
    • Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
    • Full integration with Boeffla-Config V2 (you need at least version 2.4.02 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
    • Dash charging fully supported
    • The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
    • Additional governors: Impulse, zzmoove, elementalx, conservative, ondemand, blu_active
    • Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid, zen, maple
    • CPU overclocking - one additional overclocking step for both clusters (1,72 GHz for little CPU / 2,26 GHz for big CPU)
    • No GPU overclocking, no CPU and GPU voltage interface
    • USB charge rate bumped up to 900 mA
    • Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
    • CPU core profiles to restrict number of CPU cores being used (the OP3 does not hotplug based on load)
    • Boeffla-Sound engine: Headphone volume and speaker volume (only lowering volumes for speaker)
    • Dynamic FSync (activated if screen on, deactived if screen off), configurable
    • Input boost frequencies and duration configurable per CPU cluster, input boost switch
    • Show CPU frequency usage per CPU and frequency in Boeffla-Config
    • Show GPU frequency usage per frequency in Boeffla-Config
    • KCal V2 Color control
    • Display backlight limits configurable (to avoid display brightness gets too low in some situations)
    • Display backlight dimmer
    • Swipe2wake gestures
    • Swipe2sleep gestures
    • Boeffla generic wakelock blocker V1.1.0 (documentation)
    • SD card read ahead buffer configurable (default increased to 1024 kB)
    • Ext4 File system tweaks (default to on, can be disabled)
    • Kernel logger (dmesg) configurable
    • CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
    • NFS support (module)
    • NTFS support (module)
    • XBox support (module)
    • OTG-Ethernet support (module)
    • TCP Congestion changed to Westwood
    • Many additional TCP congestion algorithms available
    • Entropy values configurable
    • Hardware touch keys are locked as long as screen is in use (touched) for better usability
    • Swap supported
    • Various minor kernel tweaks
    • Doze mode configurable in Boeffla-Config
    • Full selinux strict support (switchable to permissive on demand)
    • Show speedbin information (PVS level) in Boeffla-Config app
    • init.d support (in /system/etc/init.d - set correct permissions!)
    • Automatic EFS backup
    • Integrated full busybox 1.24.2 (own compilation)
    • Kernel initialisation log file (with history of 3 log files)
    • Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
    • Google gcc 4.9 toolchain (64 bit) used for best stability
    • Always based on latest LineageOS kernel sources (http://github.com/LineageOS/android_kernel_oneplus_msm8996)

    Download

    For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
    www.boeffla.de


    History and design targets

    Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.

    Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.

    The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
    It aims more for a good mix of all, not sacrificing stability and functionality in the end.
    And - most important: It aims to stay quite close to stock !!!

    These design targets are also valid for the OnePlus kernel here!!!

    This said, I will definitely NEVER implement:

    • things I do personally not need
    • things I do not like
    • things that are in any way dangerous
    • anything which is highly experimental
    • custom hotplugging algorithms
    • a CAF based kernel
    • anything that requires upstreaming of kernel parts to a higher kernel major version
    So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.

    And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
    I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...


    Compatibility

    To reiterate it again: Flash the correct kernel depending on whether you are using Lineage/CM or another rom !!!


    Configuration of the kernel

    To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.

    You need at least version 2.4.02 or higher for the OnePlus 3 Boeffla Kernels.

    Donation

    If you like my work, feel free to donate: Donation-Link

    If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.


    Source code

    All sources can be found in my Github repository: http://github.com/andip71


    Credits to developers

    Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:

    * ZaneZam
    * Grarak
    * Yank555
    * Hardcore
    * Chainfire
    * AndreiLux
    * Netarchy
    * Gokhanmoral
    * Simone201
    * Mialwe
    * Entropy512
    * Faux
    * Harunjo
    * FranciscoFranco
    * Ak
    * Osm0sis

    ... I just hope I did not forget someone. If so, please let me know and I will add you of course.
    Thanks to all of you for your great work !!!

    Disclaimer

    *** As always - Flash on our own risk! ***

    Make sure you flash the correct version depending on your firmware version!

    I can and will not take any responsibility for bricked phones or lost data.

    It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.


    Cheers and enjoy
    Andi
    24
    *** You want my support? Then stick to my rules ***

    Guys, I am receiving more and more completely useless support requests in different threads. Useless because people provide nothing to be able to help, not even the minimal possible information they could give.

    Hence, I will now remind anyone again on the support guide lines stated here:
    http://boeffla.de/index.php/support/support

    Also you need to ensure you follow the installation guide lines incl. trouble-shooting stated here:
    http://boeffla.de/index.php/support/installation-how-to

    And to cut a long story short: If you do not at least provide what I request in the support guide lines, I will IGNORE YOUR REQUESTS IN FUTURE.
    Straight and simple. I have enough of people wasting my time just because they are too lazy to write details.
    Period.

    Also as a reminder:
    • you use xposed? -> no support, everything is your own issue
    • you use a custom rom and not the official stock or CM one? -> good luck, you are on your own
    • you undervolt or overclock? -> have fun, but without my support
    Sorry, this might sound harsh (and it is meant to sound harsh), but you cannot imagine about how crappy support requests can be. Stating something does not work is just not enough.

    Please consider that!!!

    Andi
    23
    Hi,

    new CM14.1 version is out.

    Version 2.0-beta4
    28.11.2016

    • Note: You need at least version 2.4.19 of Boeffla-Config V2 to allow all functionalities to be available
    • Change: Behaviour of hardware buttons while touchscreen is touched now configurable (in LED+Display tab of Boeffla-Config)
    • New: GPU boost (credits to flar2) implemented with 4 configuration options: Off (default), low, medium and high boost
      (Note: I am not a gamer, so this is completely not tested by me to check if it has any effect)
    • Change: Some configuration cleanup and smaller tweaks incorporated
    Enjoy
    Andi
    23
    Hi all,

    quick update for CM14.1 kernel.

    Version 2.0-beta3
    21.11.2016

    • Update: Updated with latest official CM kernel commits as of 21.11.16, 9am CET
    • Change: Internal cleanup and improvements
    Enjoy
    Andi
    22
    Hi all,

    maintenance update for CM14.1 kernel:

    Version 2.0-beta5
    05.12.2016

    • Note: You need at least version 2.4.19 of Boeffla-Config V2 to allow all functionalities to be available
    • Update: Updated with latest official CM kernel commits as of 05.12.16, 9am CET
      (completely rebased again on latest sources (as I did a merge error a while ago, which was easier corrected by a rebase)
    • Change: Update with latest anykernel commits (credits to Osm0sis)
    • Change: Anykernel hardening
    Enjoy
    Andi
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone