They are for Wolfson micro based audio hubs only (galaxy s3).
That is mentioned in the faq, also the documentation of kernel settings mentions which settings are available where.
Andi
[EOL] [KERNEL] [OnePlusX] [Lineage14/CM13] Boeffla-Kernel (28-03-2018)
- Thread starter andip71
- Start date
- Status
That is mentioned in the faq, also the documentation of kernel settings mentions which settings are available where.
Andi
No, I am not providing nethunter enabled kernels.
@ZaneZam does that for some devices, but not for the OPX as far as I know.
Sorry
Andi
He will not support LOS 15.1 for OPX.
I hope there will be still some maintenance updates for the LOS 14 kernel, as the last one was 3 months ago.
OOS 3.1.4 kernel is EOL unless OOS releases something new.
LOS kernel is not EOL.
LOS 14.1 kernel 6.1 beta5 is stable and final.
LOS 15.1 kernel is awaited.
Maybe read his website? There will be no LOS 15.1 kernel for OPX.
Also check his roadmap: https://boeffla.de/index.php/info/kernel-status-roadmap
And how can a beta kernal be final? Rofl. Version 6.0 is the latest stable version.
Last edited:
There will be a last final of course, once they switch from 14.1 to 15.x.
Also there is no need for any update atm, there were no code changes by LineageOS team done after my last update.
Andi
i need ums, mtp is too slow.
i hope someone can port this kernel for 15.1 and make it compatible with config app.
it will be a shame to be stuck on 14.1 when 15.1 is available plus the hardware is more than good enough for me.
Last edited:
If it is just about ums, you don't need a custom kernel for that.
There is an app around here on xda which does the same.
https://forum.xda-developers.com/android/apps-games/app-universal-mass-storage-enabler-beta-t3240097
Andi
i also overclock to 2572 mhz and undervolt medium use ondemand governor for both gpu cpu
any solution to achieve this in oreo?
Well, maybe someone creates a custom kernel for Oreo for the OnePlus X.
But not sure, developer community for X is not really big.
Andi
is it very difficult to port this kernel on oreo without adding any new features?
how much time does it take roughly?
Hard to say without having seen the Oreo base kernel code.
However, I would not say it is very hard but more a taks for a few days.
It is definitely doable and a medium experienced kernel dev should be able to do that.
Andi
franco is the only one considering developing a kernel for Oreo, so let's hope he does.
since you know this kernel best if we do some crowdfunding here and pay you will you like to port?
Naaah, I am really sorry. It is not about money, it is about time and priorities.
I just cannot spend more time than I have anymore. No money of the world could change that and magically give me more time (ok, if someone would pay my monthly salary for the rest of my life, the story is different, haha).
Many thanks that you even considered that, but no... it does not work anymore. Journey is over with LOS 14.1.
Really sorry, thanks for understanding
Andi
Thanks for your replies, i understand your position. I guess i'll have to upgrade to a boeffla supported device.
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
51** Note: This kernel is end-of-life and will no more be maintained. There will be no LineageOS 15.1 or newer kernel be available anymore **
Hi all,
some of you know me from the other OnePlus (One and Two) or Samsung devices areas, where I provide my kernels already for more than two years to OnePlus One, OnePlus Two, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)
Now I own a OnePlus X device and decided to port my kernels also to this device.
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Compatibility
Important: This kernel is only meant to be compatible with official Cyanogenmod and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Important notes
When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !
Make sure you flash the correct kernel version, depending on whether you really use CM or a different OS !!!
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (quite outdated, as it is focused on S3 still).
Click here to learn about using the config app (quite outdated, as it is focused on S3 still).
I will refuse to give support if you do any undervolting and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Change log for CM13 kernel - Click here
Features
- Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
- Full integration with Boeffla-Config V2 (you need at least version 2.2.42 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
- Additional governors: zzmoove, intelliactive, intellidemand, intellimm, wheatley, smartmax, smartmax_eps, slim, intellimm, pegasusq, nightmare, lionheart, impulse, ondemandplus, yankactive
- Zzmoove supporting native hotplugging profiles
- Additional schedulers: fiops, bfq, sio, tripndroid, zen
- Many Hotplug tweak profiles (Default, Optimized, 1 core max, 2 cores max, 3 cores max, 2 cores min, 3 cores min, 4 cores min, 2 cores exact, 3 cores exact)
- Notification LED control (fading, speed, brightness)
- Boeffla-Sound engine (Headphones volume configurable)
- True dynamic FSync (activated if screen on, deactived if screen off), configurable
- Touch boost frequency and duration configurable, touch boost switch
- Additional swipe2wake gestures
- Additional swipe2sleep gestures
- CPU Overclocking up to 2,57 GHz
- CPU Voltages interface for undervolting/overvolting
- GPU idle frequency 27 Mhz added
- GPU governor selection support with fixed simple_ondemand
- Show GPU frequency usage per frequency in Boeffla-Config
- KCAL color control driver
- Swipe2wake gestures
- Swipe2sleep gestures
- Boeffla generic wakelock blocker V1.1.0 (documentation)
- SD card read ahead buffer configurable (default increased to 1024 kB)
- Ext4 File system tweaks (default to on, can be disabled)
- System Tweaks predefined supported
- Kernel logger (dmesg) configurable
- Charge rates for AC charger and USB charging separately configurable (set charge rate to 0 to have stock charge logic back)
- CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
- NFS support (module)
- exFat opensource support
- NTFS support (module) - read-only
- XBox support (module)
- OTG-Ethernet support (module)
- TCP Congestion changed to Westwood
- Multiple additional TCP congestion algorithms available
- Swap supported
- init.d support (in /system/etc/init.d - set correct permissions!)
- Default entropies increased
- Automatic EFS backup
- Full support for mpdecision for best compatibility and smoothness (no min cpu frequency reset, use Boeffla-Config to configure min frequencies only)
- Integrated full busybox 1.24.2 (own compilation)
- Kernel initialisation log file (with history of 3 log files)
- Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
- Presets supported in Boeffla-Config by kernel (Extreme power, power, normal, battery friendly and battery saving)
- Updated wifi drivers
- Kexec hardboot patch for multirom usage (not supported, not fully working)
- Google gcc 4.9 toolchain used for best stability
- Always using latest CM Initramfs
- Always based on latest CM kernel sources (https://github.com/CyanogenMod/android_kernel_oneplus_onyx)
- Note: I do NOT upstream the kernel to higher Linux kernel versions anymore as this usually has zero benefit but likely introduces new issues + is a waste of effort in the end
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
- things I do personally not need
- things I do not like
- things that are in any way dangerous
- anything which is highly experimental
- f2fs - it is known to cause various issues and compatibility problems
- custom hotplugging algorithms
- a CAF based kernel
- anything that requires upstreaming of kernel parts to a higher kernel major version
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the correct kernel depending on whether you are using CM or another rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
You need at least version 2.2.42 or higher for the OnePlus X Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* Grarak
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
* FranciscoFranco
* Ak
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi20Hi all,
new update for LineageOS 14.1 Boeffla-Kernel is out:
Version 6.1-beta3
07.09.2017
- [FONT="]New: Boeffla generic wakelock blocker added in version 1.1.0 - this is an expert function only, so please click for the [/FONT]usage guide on Boeffla homepage
[FONT="](Note - the following wakelocks are blocked by default already: qcom_rx_wakelock, wlan, wlan_wow_wl, wlan_extscan_wl, netmgr_wl and NETLINK)[/FONT] - Change: Internal kernel busybox updated to latest version 1.27.2 (self-compiled from sources, www.busybox.net)
- Change: Improve safetynet handling (credits to SultanXDA)
- Change: Internal improvements in kernel start script
Enjoy
Andi20Finally - beta1
Hi all,
after lots of trouble to get beta1 running based on the latest official CM sources, I can now proudly present beta1 to you:
Version 5.0-beta1
25.04.2016
- First official beta of Boeffla Kernel for CM13
All functionalities of last alpha8 kernel - Update: Updated with latest official CM kernel commits as of 25.04.16, 8am
- Update: Ramdisk of official CM13.0 build of 25.04.16
- Change: Kernel compression changed from gzip to xz - resulting in smaller kernel image
Andi19First beta for CM14.1
Hi all,
finally there is a very first beta of Boeffla-Kernel for CM14.1 now.
Again: This is a very first beta, so expect bugs!!!
Here the change log + feature list:
Version 6.0-beta1
22.12.2016
- First official build for cm14
- This kernel has exactly the same functionalities than latest CM13 Boeffla kernel, details please see below
- Note: This kernel only runs on CM14.x for the OnePlus X - nothing else !!!
- Note: You need at least version 2.4.21 of Boeffla-Config V2 to allow all functionalities to be available
- Features:
- Full integration with Boeffla-Config V2 (you need at least version 2.4.21 or higher !!!) configuration app (get it from http://www.boeffla-kernel.de) to configure all kernel settings
- Additional governors: zzmoove, intelliactive, intellidemand, wheatley, smartmax, smartmax_eps, intellimm, pegasusq, nightmare, lionheart, impulse, ondemandplus, yankactive
- Zzmoove supporting native hotplugging profiles
- Additional schedulers: fiops, bfq, sio, tripndroid, zen
- Many Hotplug tweak profiles (Default, Optimized, 1 core max, 2 cores max, 3 cores max, 2 cores min, 3 cores min, 4 cores min, 2 cores exact, 3 cores exact)
- Boeffla-Sound engine (Headphones volume configurable)
- True dynamic FSync (activated if screen on, deactived if screen off), configurable
- Touch boost frequency and duration configurable, touch boost switch
- Remove userspace boost for better frequency control
- Additional swipe2wake gestures
- Additional swipe2sleep gestures
- CPU Overclocking up to 2,57 GHz
- CPU Voltages interface for undervolting/overvolting
- GPU idle frequency 27 Mhz added
- GPU governor selection support with fixed simple_ondemand
- Show GPU frequency usage per frequency in Boeffla-Config
- KCAL color control driver
- Swipe2wake gestures
- Swipe2sleep gestures
- SD card read ahead buffer configurable (default increased to 1024 kB)
- Ext4 File system tweaks (default to on, can be disabled)
- System Tweaks predefined supported
- Kernel logger (dmesg) configurable
- Charge rates for AC charger and USB charging separately configurable (set charge rate to 0 to have stock charge logic back)
- CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
- NFS support (module)
- exFat opensource support
- NTFS support (module) - read-only
- XBox support (module)
- OTG-Ethernet support (module)
- TCP Congestion changed to Westwood
- Multiple additional TCP congestion algorithms available
- Swap supported
- UMS mode for external SD card
- Doze mode switchable
- Verifiedbootstage flag remove to avoid triggering safetynet
- init.d support (in /system/etc/init.d - set correct permissions!)
- Entropies configurable
- Automatic EFS backup
- Full support for mpdecision for best compatibility and smoothness (no min cpu frequency reset, use Boeffla-Config to configure min frequencies only)
- Integrated full busybox 1.25.1 (own compilation)
- Kernel initialisation log file (with history of 3 log files)
- Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
- Presets supported in Boeffla-Config by kernel (Extreme power, power, normal, battery friendly and battery saving)
- Security patches included, which are not in the official repo
- Google gcc 4.9 toolchain used for best stability
- Always based on latest CM kernel sources (https://github.com/CyanogenMod/android_kernel_oneplus_onyx)
- Note: I do NOT upstream the kernel to higher Linux kernel versions anymore as this usually has zero benefit but likely introduces new issues + is a waste of effort in the end
Andi18Hi guys.
Time to say goodbye now for 3 weeks.
I am shortly departing to sunny Florida for my annual holidays.
This means:
I will read the forum but most likely not answer or only answer delayed.
There will be absolutely no kernel updates until I return
If things break in the meantime, they break - no way out
Have a goooood time!
Andi
New posts
-
General [ROM]Modified Miui13.0.4 EU rom with adreno driver v530
- Latest: samsungics1200
-
