[EOL] [KERNEL] [OnePlusX] [Lineage14/CM13] Boeffla-Kernel (28-03-2018)

[saurabh40629]

Yes. Flash the reset zip in recovery.

Depending on what you want to achieve, there are other ways too.
Referring to the documentation on the homepage about the principles again...


It does stick.

You surely use Boeffla-Config to configure that?

Andi

I read the the app documentation buy could not find it. Where is this reset zip?
What I am trying to do is play around kernel setting and tuning governors, but if phone freezes and gets stuck, I don't want it to reboot to same profile which caused it. Otherwise it might get stuck on constant reboot spree.

 

[andip71]

I read the the app documentation buy could not find it. Where is this reset zip?
What I am trying to do is play around kernel setting and tuning governors, but if phone freezes and gets stuck, I don't want it to reboot to same profile which caused it. Otherwise it might get stuck on constant reboot spree.

The zip is always in /boeffla-kernel-data folder on your internal sd memory.

Andi

 

[andip71]

Hi guys,

maintenance update for you:

Version 5.0-beta3
02.05.2016

• Update: Ramdisk of official CM13.0 build of 02.05.16

Enjoy
Andi

 

[RWBY]

Im kind of fall in love with your CM13 kernel already =)

Sent from my E 1001 using Tapatalk

 

[fatino]

Hi again,
Did you test the currents of charging Boeffla? I can get only 1,3A on 2A Samsung charger. The options work between 0 and 1,3A but I can't go higher. On stock logic it goes 1,3A and on your 1,6A it goes 1,3A Does this mean charger can't go any further?(I don't have any other device to test this)

 

[andip71]

Hi again,
Did you test the currents of charging Boeffla? I can get only 1,3A on 2A Samsung charger. The options work between 0 and 1,3A but I can't go higher. On stock logic it goes 1,3A and on your 1,6A it goes 1,3A Does this mean charger can't go any further?(I don't have any other device to test this)

No, it means the charge currents are capped at that value (most probably in hardware).
We know that, nothing is wrong with your charger.

But just for clarity - if you checked the charge current in Boeffla-Config, we already know this value is just a very unprecise value. So do not give too much on that.
I checked it with an ampere meter a while ago and in fact it can go up to 1.56 A on my device.

Andi

 

[RWBY]

No, it means the charge currents are capped at that value (most probably in hardware).
We know that, nothing is wrong with your charger.

But just for clarity - if you checked the charge current in Boeffla-Config, we already know this value is just a very unprecise value. So do not give too much on that.
I checked it with an ampere meter a while ago and in fact it can go up to 1.56 A on my device.

Andi

Hi Andi, is this normal without any config that it go up to 1.56A ? Because last time i check with ampere apps it dont go to 1.56A.

Sent from my E1001 using Tapatalk

 

[andip71]

Hi Andi, is this normal without any config that it go up to 1.56A ? Because last time i check with ampere apps it dont go to 1.56A.

Sent from my E1001 using Tapatalk

Without any config, stock logic is used. And I cannot tell you exactly how this is modelled.

However, also depending on how full or empty your battery is - you do not always get the same. Charging starts slow, then goes up to higher rates and goes down again at the end.
Also it depends on other factors like temperatures, how old your battery is and and and.
So you would need to record the whole charge cycle.

It is in total a non-trivial topic.

Andi

 

[RWBY]

Without any config, stock logic is used. And I cannot tell you exactly how this is modelled.

However, also depending on how full or empty your battery is - you do not always get the same. Charging starts slow, then goes up to higher rates and goes down again at the end.
Also it depends on other factors like temperatures, how old your battery is and and and.
So you would need to record the whole charge cycle.

It is in total a non-trivial topic.

Andi

I see. Thanks for explain.
Another thing, when i set led blink to 1 it does not blink in test mode and in real notification mode. what it does its just light up. I wonder is this normal ?

 

[andip71]

I see. Thanks for explain.
Another thing, when i set led blink to 1 it does not blink in test mode and in real notification mode. what it does its just light up. I wonder is this normal ?

What do you set to 1? Brightness or speed?

Andi

 

[RWBY]

What do you set to 1? Brightness or speed?

Andi

Oh yeah, i mean the speed.

Sent from my E1001 using Tapatalk

 

[andip71]

Oh yeah, i mean the speed.

Sent from my E1001 using Tapatalk

Yes, then it is normal and intended like that.

1 means continuous light, 2 is the lowest speed possible.

Andi

 

[RWBY]

Yes, then it is normal and intended like that.

1 means continuous light, 2 is the lowest speed possible.

Andi

ahh, i see. Im just curious. Well, thank s again for your wonderfull kernel and have a nice day.

 

[phoberus]

Version 5.0-beta3
02.06.2016

• Update: Ramdisk of official CM13.0 build of 02.05.16

Enjoy
Andi

little typing error
But the kernel feels like from the future

 

[andip71]

little typing error
But the kernel feels like from the future

Oh yes, indeed. Thanks for letting me know, it is corrected now

Andi

 

[andip71]

Hi guys.

Time to say goodbye now for 3 weeks.

I am shortly departing to sunny Florida for my annual holidays.

This means:
I will read the forum but most likely not answer or only answer delayed.
There will be absolutely no kernel updates until I return
If things break in the meantime, they break - no way out

Have a goooood time!

Andi

 

[ArmStrongDickPunch]

Hi guys.

Time to say goodbye now for 3 weeks.

I am shortly departing to sunny Florida for my annual holidays.

This means:
I will read the forum but most likely not answer or only answer delayed.
There will be absolutely no kernel updates until I return
If things break in the meantime, they break - no way out

Have a goooood time!

Andi

Have a great time! And that ks for ur amazing work on this kernel!

Sent from my ONE E1005 using XDA-Developers mobile app

 

[Exodusche]

Hope your enjoying your holidays Andi. Great work on this kernel most impressive.

 

[andip71]

Hope your enjoying your holidays Andi. Great work on this kernel most impressive.

Yes I do.
Thanks for asking.

Not posting pictures though, as people might not like getting a little bit jealous [emoji2]

Andi

 

[Orphee]

Yes I do.
Thanks for asking.

Not posting pictures though, as people might not like getting a little bit jealous [emoji2]

Andi

Do it please, give us some dream