[EOL] MultiROM v33(e) for OP3/3T [UNIFIED]

Search This thread

kingchren

New member
Jan 17, 2018
1
0
MIUI not work with secondary rom or prime rom,it always bootloop

my prime rom:mokee (maybe it base on lineageOS)
secondary rom :miui 7.1.2 but it‘isnt working.please help me

---------- Post added at 07:33 AM ---------- Previous post was at 07:29 AM ----------

my prime rom:mokee (maybe it base on lineageOS)
secondary rom :miui 7.1.2 but it‘isnt working.please help me

where i can find log file?I'm not good at English
 
Last edited:

shafiaszad

Senior Member
Aug 8, 2014
112
50
31
Dhaka
Hi guys. My device is op3 bought from india. I was having this problem of Severe random restart and sleep of death after a few days updating to oreo. I have tried all kind of room oos 5 , z unleashed, rr 6 rom, Omni rom from Oreo builds. They all made problem. I reverted back to oos 4.5 I was still facing same problem but less severe. Tried vortex carbide, aospa, Los but same problem but only sometimes. I tried hard brick recovery by msmdownloadtool but no result.
Then I installed multirom 33 from xda and oos 4.5 and sultan xda LOS 14.1 together. Suddenly I was facing no problem in sultan xda Los. So I just wiped everything and now using sultan xda as primary room without uninstalling multirom and multirom twrp. Now for two days it's running fine.
I was thinking that this is hardware issue, but now it seems that it's software issue.
But I am not a Dev so can someone tell me in software side what are things cannot be solved by msmdownloadtool?? I want to use oos but I am stuck with sultan xda los14.1
 

isoladisegnata

Senior Member
Sep 4, 2011
954
165
Sun's City
Hi guys. My device is op3 bought from india. I was having this problem of Severe random restart and sleep of death after a few days updating to oreo. I have tried all kind of room oos 5 , z unleashed, rr 6 rom, Omni rom from Oreo builds. They all made problem. I reverted back to oos 4.5 I was still facing same problem but less severe. Tried vortex carbide, aospa, Los but same problem but only sometimes. I tried hard brick recovery by msmdownloadtool but no result.
Then I installed multirom 33 from xda and oos 4.5 and sultan xda LOS 14.1 together. Suddenly I was facing no problem in sultan xda Los. So I just wiped everything and now using sultan xda as primary room without uninstalling multirom and multirom twrp. Now for two days it's running fine.
I was thinking that this is hardware issue, but now it seems that it's software issue.
But I am not a Dev so can someone tell me in software side what are things cannot be solved by msmdownloadtool?? I want to use oos but I am stuck with sultan xda los14.1
I think that you have to use this procedure

https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/

Follow step by step and you will solve..if is a software problem..

Sent from my ONEPLUS A3003 using XDA-Developers Legacy app
 

ayanroy

Senior Member
Nov 15, 2014
117
3
Which multirom should i use, if i want to use oos as secondary and rr 6.0 as primary

---------- Post added at 07:39 AM ---------- Previous post was at 07:36 AM ----------

I used this twrp, multirom and flashed oos 4.0.2 as secondary and got my phone hard bricked, it was not even responding to power button
 

ayanroy

Senior Member
Nov 15, 2014
117
3
HydrogenOs boots perfect as secondary,OOS also, thanks for the great work
515f987a518fe23ad9acc40809d72146.jpg
020084f3042fc0e4a9877a392f689169.jpg
6678d6318df224fb3e0709a196031bbe.jpg
12655460d018ce7bc280131ce4d8f34a.jpg


Enviado desde mi ONEPLUS A3003 mediante Tapatalk
OB21 as primary
See this guy is using both oos and hos as secondary

---------- Post added at 01:08 PM ---------- Previous post was at 01:07 PM ----------

You cannot flash oos in secondary ROM..

Sent from my [device_name] using XDA-Developers Legacy app

See my previous quote
 

ayanroy

Senior Member
Nov 15, 2014
117
3

Bearthquake

Senior Member
May 8, 2015
1,237
960
I also want to use oos nougat as secondary only, want to keep oreo as internal

---------- Post added at 02:03 AM ---------- Previous post was at 02:01 AM ----------



I want to use oreo as internal not secondary, oos nougat as secondary
Won't work because as far as I'm aware the firmware needs to be compatible across the board. So on Oreo firmware nougat OOS ROMs won't work.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 108
    vh3puLb.png


    MultiROM is one-of-a-kind multi-boot mod for Oneplus 3. It can boot any Android ROM as well as other systems like Ubuntu Touch, once they are ported to that device. Besides booting from device's internal memory, MultiROM can boot from USB drive connected to the device via OTG cable. The main part of MultiROM is a boot manager, which appears every time your device starts and lets you choose ROM to boot. You can see how it looks on the left image below and in gallery. ROMs are installed and managed via modified TWRP recovery. You can use standard ZIP files to install secondary Android ROMs and MultiROM even has its own installer system, which can be used to ship other Linux-based systems.

    Features:
    * Multiboot any number of Android ROMs
    * Restore nandroid backup as secondary ROM
    * Boot from USB drive attached via OTG cable

    You can also watch a video which shows it in action.

    Warning!

    It _is_ dangerous. This whole thing is basically one giant hack - none of these systems are made with multibooting in mind. It is no longer messing with data partition or boot sector, but it is possible that something goes wrong and you will have to flash factory images again. Make backups. Always.​

    Installation
    Firstly, there are videos on youtube. If you want, just search for "MultiROM installation" on youtube and watch those, big thanks to all who made them. There is also an awesome article on Linux Journal.

    Note 1: Your device must not be encrypted (hint: if you don't know what it is, then it is encrypted).

    MultiROM has 2 parts you need to install:
    • Modified recovery - You cand download the unified IMG file here, or specific for OP3 from second post and use fastboot or TWRP or Flashify app to flash it.
    • MultiROM - download the unified ZIP file here, or specific for OP3 from second post and flash it in recovery.
    • Go into TWRP MultiRom settings and check "Enable No-KEXEC Workaround"
    Your current rom will not be erased by the installation.
    Download links for specific OP3 version are in the second post.


    WORKAROUND for FCs
    If you get FC's in your secondary, edit build.prop in that secondary's /system dir and set:

    Code:
    #ro.sys.sdcardfs=true

    ...to comment the line (don't delete, don't set to false).

    Don't boot before editing this line (flash secondary, edit and then boot).

    You can edit in your primary if you are rooted, looking into:

    Code:
    /sdcard/multirom/roms/<your_sec_rom>/system/build.prop

    *You can also try using multiromfix.zip, available in this post, thx to @Startrek852 (to disable sdcardfs support in that secondary).



    Adding ROMs
    1. Android
    Go to recovery, select MultiROM -> Add ROM. Select the ROM's zip file and confirm. As for the space, clean installation of stock 6.x after first boot takes 900+mb of space.​

    Using USB drive
    During installation, recovery lets you select install location. Plug in the USB drive, wait a while and press "refresh" so that it shows partitions on the USB drive. You just select the location (extX, NTFS and FAT32 partitions are supported) and proceed with the installation.
    If you wanna use other than default FAT32 partition, just format it in PC. If you don't know how/don't know where to find out how, you probably should not try installing MultiROM.
    If you are installing to NTFS or FAT32 partition, recovery asks you to set image size for all the partitions - this cannot be easilly changed afterward, so choose carefully. FAT32 is limited to maximum of 4095MB per image - it is limitation of the filesystem, I can do nothing about that.
    Installation to USB drives takes a bit longer, because the flash drive is (usually) slower and it needs to create the images, so installation of Ubuntu to 4Gb image on my pretty fast USB drive takes about 20 minutes.
    Enumerating USB drive can take a while in MultiROM menu, so when you press the "USB" button in MultiROM, wait a while (max. 30-45s) until it searches the USB drive. It does it by itself, no need to press something, just wait.​

    Updating/changing ROMs

    1. Primary ROM (Internal)
    • Flash ROM's ZIP file as usual, do factory reset if needed (it won't erase secondary ROMs)
    • Go to MultiROM in recovery and do Inject curr. boot sector.
    2. Secondary Android ROMs
    If you want to change the ROM, delete it and add new one. To update ROM, follow these steps:
    • Go to MultiROM -> List ROMs and select the ROM you want to update.
    • Select "Flash ZIP" and flash ROM's ZIP file.

    Source code

    Thanks a lot to Tasssadar for creating this awesome utility.
    And to @nkk71 for the No-KEXEC workaround

    MultiROM, Tool/Utility for the OnePlus 3


    XDA:DevDB Information
    MultiROM OP3/3T, Tool/Utility for the OnePlus 3

    Contributors
    martinusbe, BitOBSessiOn

    Version Information
    Status: Alpha
    Current Beta Version: 3.0.3-2
    Beta Release Date: 2017-02-12

    Created 2016-07-10
    Last Updated 2019-09-10
    62
    Reserved

    Downloads
    IT WILL NOT WORK WHEN ENCRYPTED
    How-To by @bihariel
    MultiRom for oneplus3
    Recovery 08/03 Fixed usb-otg
    multirom-20160814-v33b-UNOFFICIAL-oneplus3.zip
    uninstaller
    Update 11/26
    Recovery 11/26
    multirom-20161126-v33e-UNOFFICIAL-oneplus3.zip
    Update 02/05/2017 op3
    for new firmware 4.0.+, so older roms/kernels will not work on this!
    AFH folder here
    Update 02/20 by @BitOBSessiOn Unified
    In post #1183
    Update 03/10 Unified By BitOBSessiOn
    recovery https://www.androidfilehost.com/?fid=745425885120713897
    mr zip https://www.androidfilehost.com/?fid=817550096634752067
    Update 08/07 by BitOBSessiOn
    Post #1950

    Flashable zip to fix your locksettings can be found here

    MR Manager TBO 2016/08/17
    Multirom Manager apk with oneplus support
    Changelog:
    - Darkened UI by @daveyannihilation #WhiteUImustDie
    - Added icons for OOS, Tipsy, Tesla, Validus, Slim (needs the new zip flashed)
    - Supports all Oneplus devices, Redmi2, Lux unoffically (to use the icons, the MR maintainer will need to update his MR zip)
    MR Manager TBO 2017/04/21
    Multirom Manager apk with added oneplus3T support

    Flash recovery
    Flash multirom zip
    Enable kexec workaround in TWRP mr settings
    Enjoy!
    25
    The steps were already written but here you have.

    I asume you are running Oxygen os.

    1- Make a backup of all your internal storage (SD) data via usb MTP on PC.
    2- Your device must have the bootloader unlocled, if not, search on xda how to do it. At this step you will need to install adb driver and fastbooot as described on the unlocking tutorial.

    3- Reboot into bootloader and type on CMD on windows "fastboot format userdata"

    4- Install multirom Twrp from fastboot " fastboot flash recovery multiromrecovery.img"

    5- Reboot into twrp and copy all your backed up data via usb mtp to your phone.

    5- Open cmd and type "adb shell chown -R media_rw:media_rw /data/media"

    6- Flash supersu to avoid re-encryption by OOS

    7 - Flash multirom.zip and reboot system. mr menu will appear, select Internal and leave oxegen to fully boot. Go to settings, fingerprint and security and check if it says device decrypted.

    8- Reboot to twrp and Add the secondary rom from multirom menu in the twrp.

    9- In multirom settings activate the option no exec warkarroun, also you can set in autoboot tab the option to boot always the rom you want.

    9- Reboot and enjoy
    23
    Reserved

    Please read all about the no-kexec workaround from the author directly, (to avoid duplicity and get latest information), thanks to @nkk71
    http://forum.xda-developers.com/showpost.php?p=64248526&postcount=4

    *Updated MultiROM Manager APK available here.

    *FCs in secondaries should have been fixed in latest TWRP-MROM versions.
    17
    I created a flashable zip that could sovle the wrong pin/pattern error occurred after boot in both primary ROM and secondary ROM.

    Flash this zip in recovery (For your secondary ROM, boot in TWRP>multirom>list rom>select your wrong-pin/pattern-ROM>install zip>flash this zip)

    This zip will delete:
    gatekeeper.password.key,
    gatekeeper.pattern.key,
    locksettings.db,
    locksettings.db-shm,
    locksettings.db-wal.

    This will reset your lockscreen to "Slide", but your saved fingerprints will NOT be deleted. Just set a new security lockscreen after boot.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone