[EOL]|PhaNToM-LP||R-7~lp/mm32||O.C 1.8ghz/720Mhz||Uber-4.9-TC||Blazing-Fast||Stable|

How your Device Feels After Phantom

  • Beast 1.8 Ghz cpu/650 Mhz gpu Insane

    Votes: 67 64.4%
  • Make a Btry saving one without oc plox

    Votes: 19 18.3%
  • In love More Featurs Plox :3

    Votes: 9 8.7%
  • Bad Kernel Dev Is noob :/

    Votes: 9 8.7%

  • Total voters
    104
Search This thread

dev_harsh1998

Recognized Developer
Apr 25, 2014
895
4,791
Varanasi
attachment.php

Phantom Kernel by Harsh!t Jain
Unleash The Power! Wingtech msm8916 B|
The Developer :- Be My friend On facebook :D
Disclaimer
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/


Changelog

Phantom Kernel-R1
Hotplugs•Alucard

•Mako

•Zen-Decision

•Bricked

•AutoSMP

•Intelliplug


CPU Governors

•ElementalX

•Implulse

•Barry-Allen

•zzmoove

•Lionfish

•Conservative

•Yankactive

•Ondemand

•And many many more

GPU Governors


•msm-adreno.tz

•Simple

•Ondemand

•And many more


I/O Scheduler
•BFQ


*Fiops

*Cfq

*Noop

*Deadline

*Bfq

*Sio

*Sio-Plus

*zen

*tripndroid

*V(R)




*NEON optimized kernel

*CPU OC upto 1.8Ghz

*GPU OC upto 720 Mhz

*Powersuspend driver

*Adreno-Idler

*KSM tweaks

*USB fast charge

*Zram

* New Primitive Integer Workcue

*KCAL control

*Zram

*Camera frequency Bumped Up to 650mhz

*Built with Linaro 4.9 Cortex a15

*fsync toggle
*Lots of more stuffs


Phantom Kernel-R2



*Built with Hyper 4.9 Toolchain

*Resolved heating issue

*Implemented Samsung Touch Driver for better touch latency

*Fixed Deep Sleep issue

*Added TCP Congestion Algorithm i.e. Westwood,Highspeed,etc

*Many more

Phantom-Kernel R3



*Unlocked GPU OC upto 720 Mhz

* Mild UnderVolt For Heat Reduction

*Added Faux Sound

*Added Msm Sleeper Hotplug

*Adreno KGSL Update Merged Latest Adreno Kgsl Drivers



Phantom-Kernel R4



* Built with Sabermod*Uber 5.3 Toolchain

*Xposed Random Reboots Fixed

* Core Offlining Fixed

*Hz values changed to 199

*Fastcharge At its max 1579 (earlier was 850) Charge at crazy speeds

*Rebased fully

*Revolted Kernel

*Optimized Tweaks


Phantom-Kernel R5


* Rebased Fully Again

*Tweaked Thermal To Ultimate

*Tweaked KSM to Unltimate

*Ksm Check page Skip

*Fixed Microphone Issue See Post 2 How to Fix the Mic

*Heat = highest recorded 56 in outdoor Usage thanks to @adityaChandraBose For testing



Phantom-Kernel R6


*Stability Tweaks

*Fixed Mic Gain And Speaker Gain In Faux Sound

*Governors Added :- Smartmax , ElementalX(fixed Dropping Issue), Smartmax,Hellsactive

*New i/o Schedulers :- Zen, TripNdroid,V(R)

*Removed Shi!tty Hotplugs

*Cleaned Defconfig

*New Dirty Ratio

*RADIO IS NOW WORKING

Phantom-Kernel R7

Changelogs :-
----------------Major Update-------------------
0:- My Very Own Descision Making Module that fixed the Race Between Cores
1:- Optimized Ghraphite Loop and -O3 -Ofast Major Optimizations
2:- Removed All Dirct Dependencies From Hz
3:- Removed Hotplug Control From Battery_current_limit(Intentionally Done by google to Duck Up perfermance)
4:- Removed All Bad Code From code Aurora And Google
5:- Removed All Dependencies From Powersuspend
6:- Added State Notifier and State Helper Driver Rebased Kernel Over it First Kernel For Lenovo a6000/plus Based On State Helper Thanx To pranav (I ported but :3)
7:- New Thermals (Intelli Thermals Currently Beta you may see frequncies going Up and Down While Chahging Cuase its port From hammerhead)
8:- Latest Adreno Idler And Now Based On State Helper
9:- Boosted Chanrge Speed by (69%) Compared to Phantom 4.0 <-r1
10:-Latest Caf Tag For Wingtech Plus New Stream Changes From kernel.org
11:-Major Tweaks To fiops io Schedular
12:- Added SioPlus <- I/O Schedular
13:- Now Fiops,SIOPLUS,Zen Wont overload cpu and eMMc
14:- Default to NOATIME and NODIRATIME for FS performance improvement.
15:- Fast ShutDown
16:- Optimized Zram
17:- Latest Cpu Litration For Cpu-Boost and New Call Alogrithm
18:- Latest Wifi Driver from Code aurora
19:- Improved Display Driver For Bit of Heat Reduction Confilicting to Thermal
20:- Fixed Bootloop and qpnp Vibrator and Free MemCheck Claim For Fs
20.5:- 2 Releases For Lp and MM



Downloads Please Press the Thanks Button Below to Keep this Project Alive


Download from here cm12.x 32Based Mokee and allPhantom r-7 Harsh!t Jain For Lollipop With Faux Sound
Download From Here cm13.x&&cm12.x 32based All mm/lp Phantom r-7 Harsh!t Jain lp/mm without faux Sound



Installation Instructions


Minimum Requirements To Install Phantom Kernel:
Recommended Custom Recovery TWRP and a Rooted Device

Installation Procedure:
*Boot Into Recovery Mode

*Dirty flash the rom you are
using (if needed gapps too)

*Flash provided Kernel Zip

*Wipe Cache and Dalvik

*Reboot To System



Important Information



If you are on ED300 cm12.1 your sound and wifi will create problems so for this you have to flash Modules and then Kernel Thanks to @ED300 for modules you can download them from here
(1)Flash the kernel.zip via Twrp (Not Directly Recommended Though :3 Cause i prefer Dirty Flash)

(2) Flash the Wifi fix for cm based like ed300 cm12 and cm13 based roms here!!!Thanks to @crashdjent
(3) Wipe Cache and Dalvik's Cache

Thanks to My testers

*@Sourav_8434
(Big ^^ Thanks :3 For this therad otherwise this thread would have been still a mess to deal with)
*Sagar Adhikari

*Sudhakar

*Akshat

*Sanga

*Sohaib​

* A huge thanks to my testers and my Telegram Group seriously without them it wasn't possible !
•And many more​

XDA:DevDB Information
|PhaNToM-LP||R-7~lp/mm32||O.C 1.8ghz/720Mhz||Uber-4.9-TC||Blazing-Fast||Stable|, Kernel for the Lenovo A6000/Plus

Contributors
dev_harsh1998, tarun93, dev_harsh1998
Source Code: https://github.com/dev-harsh1998/Phantom-Kernel-a6k

Kernel Special Features: OC - 1.8GHZ And GPU OC 720mhz

Version Information
Status: Stable
Current Stable Version: 4.0
Stable Release Date: 2016-05-23
Current Beta Version: GHANTA
Beta Release Date: 2016-01-19

Created 2016-05-22
Last Updated 2016-09-15
 
Last edited:

dev_harsh1998

Recognized Developer
Apr 25, 2014
895
4,791
Varanasi
Set The Sound Settings Via Kernel Auditor Like this :)

You will need kernel auditor to Fix the microphone go to kernel auditior -> go to sound settings via Thead Menu located on the top left of the app screen and slightly increase the Following 2 things 1:- Cam Coder Microphone Gain 2:- Camcoder Microphone Gain }- Both above 7 Problem Will be Fixed Screen Shots Attached For reference

Q- Which rom Our Dev Uses? Is he stilll Stuck to Cm12.1?
A:- No i am Using Source Built Pac man Rom with Latest Patches That i develop From Source Itself This rom is stable as its source built andI created patch to Every thing for this rom which means its far more stable
 

Attachments

  • Screenshot_2016-05-30-12-11-51.png
    Screenshot_2016-05-30-12-11-51.png
    50.9 KB · Views: 8,921
  • Screenshot_2016-05-30-12-11-44.png
    Screenshot_2016-05-30-12-11-44.png
    139.3 KB · Views: 8,986
  • Screenshot_2016-05-30-12-06-55.png
    Screenshot_2016-05-30-12-06-55.png
    47.5 KB · Views: 9,150
Last edited:

dev_harsh1998

Recognized Developer
Apr 25, 2014
895
4,791
Varanasi
Screen Shots here
Might be Fussed Up :3
 

Attachments

  • Screenshot_2016-05-20-16-32-56.png
    Screenshot_2016-05-20-16-32-56.png
    83.7 KB · Views: 6,439
  • Screenshot_2016-05-20-16-42-06.png
    Screenshot_2016-05-20-16-42-06.png
    87.4 KB · Views: 6,183
  • Screenshot_2016-05-21-13-40-04.png
    Screenshot_2016-05-21-13-40-04.png
    93.3 KB · Views: 6,083
  • Screenshot_2016-05-21-13-41-17.png
    Screenshot_2016-05-21-13-41-17.png
    85.3 KB · Views: 5,625
  • Screenshot_2016-05-21-13-43-53.png
    Screenshot_2016-05-21-13-43-53.png
    80.2 KB · Views: 5,429
  • Screenshot_2016-05-21-13-46-45.png
    Screenshot_2016-05-21-13-46-45.png
    88.4 KB · Views: 5,413
  • Screenshot_2016-05-21-13-47-11.png
    Screenshot_2016-05-21-13-47-11.png
    94 KB · Views: 5,185
  • Screenshot_2016-05-22-15-52-52.png
    Screenshot_2016-05-22-15-52-52.png
    138.1 KB · Views: 5,039
  • Screenshot_2016-05-22-15-53-11.png
    Screenshot_2016-05-22-15-53-11.png
    68 KB · Views: 4,885
  • Screenshot_2016-05-22-16-11-28.png
    Screenshot_2016-05-22-16-11-28.png
    90.9 KB · Views: 4,765
  • Screenshot_2016-05-22-18-04-49.png
    Screenshot_2016-05-22-18-04-49.png
    128.4 KB · Views: 4,571
  • Screenshot_2016-05-22-18-04-52.png
    Screenshot_2016-05-22-18-04-52.png
    128.2 KB · Views: 4,336
  • Screenshot_2016-05-22-18-05-21.png
    Screenshot_2016-05-22-18-05-21.png
    76.9 KB · Views: 3,974
  • Screenshot_2016-05-22-18-05-15.png
    Screenshot_2016-05-22-18-05-15.png
    110.1 KB · Views: 4,066
  • Screenshot_2016-05-22-18-05-05.png
    Screenshot_2016-05-22-18-05-05.png
    108.2 KB · Views: 4,207
  • Screenshot_2016-05-22-18-05-38.png
    Screenshot_2016-05-22-18-05-38.png
    89.7 KB · Views: 3,844
  • Screenshot_2016-05-22-18-05-43.png
    Screenshot_2016-05-22-18-05-43.png
    95 KB · Views: 3,772
  • Screenshot_2016-05-22-18-05-47.png
    Screenshot_2016-05-22-18-05-47.png
    97.9 KB · Views: 3,700
  • Screenshot_2016-05-22-18-05-58.png
    Screenshot_2016-05-22-18-05-58.png
    92.2 KB · Views: 3,757
  • Screenshot_2016-05-22-18-06-15.png
    Screenshot_2016-05-22-18-06-15.png
    97.3 KB · Views: 3,743
Last edited:

sasukay

Senior Member
Apr 12, 2014
701
331
Haridwar
technobabaon.wordpress.com
F*****k man!! This is insane..
1.8GHz and 650MHz....!!!?? Are you kidding me..??
I'm surely gonna try this one out...and will review here after some time of use.
And are you sure our phone is not gonna burn itself to death with such OC...???!! :silly:

Edit 1:- Confirmed working on MIUI 7 russian build. By working, I mean that, every feature specified in the op is there. Will update about its performance later..

Edit 2:- Working good. Battery is good and no lags or any wifi issues, whatsoever. Most of all, I don't know what happened but my internet has become noticably fast. I always thought it was problem with MIUI rom, but was not sure and blamed it on my network instead. But, after using this, the ping and data speed are very good and responsive. :D
 
Last edited:

dev_harsh1998

Recognized Developer
Apr 25, 2014
895
4,791
Varanasi
.edit


**** man!! This is insane..
1.8GHz and 650MHz....!!!?? Are you kidding me..??
I'm surely gonna try this one out...and will review here after some time of use.
And are you sure our phone is not gonna burn itself to death with such OC...???!! :silly:

Edit 1:- Confirmed working on MIUI 7 russian build. By working, I mean that, every feature specified in the op is there. Will update about its performance later..

There's just one query @dev_harsh1998
Why are you using two hotplugs at the same time. By default, alucard and zen decision are on.
.edit *Trolls Removed*
 
Last edited:

Element24

Senior Member
Nov 25, 2015
277
108
Nope Dosent Blasts It works Perfect kiss emoticon Actually i created New Potential Difference Across The Chip of 2.25*pe*areaofcapacitor3below the regulator3and along emmc/2*epsilon0 so heat Balances
Dont use it on MIUI its for Cm and Mokee BAsed Roms :3 <- Btw this is my personal innovation of maintaining new potential difference acros chip so mods now cant force me to upload it as i provided my basic git with all governers tweaks and stuff :)
Press thanks if i helped :)
I flashed it on a clean flash on ed300's cm12.1 and i also flashed kernel modules then the kernel and the wifi is not working. I also flashed super su at the end like always... Any workaround?
 

Gueztar

Senior Member
Feb 19, 2016
475
183
Martapura
WOW! Awesome works dude.. Wants to try the kernel on cm12.1 by ed300 but, can i flashing it through telo kernel that ed300 giving? Bcoz in the main thread we must flash kernel modules before flash the kernel.. Last, why you not add smartmax gorvernors + autoSMP hp? For me its verygood at balanced setting in perf and battery.. Thanks
 
Last edited:
  • Like
Reactions: NatPro

Ztsanga

Senior Member
Jan 17, 2015
141
17
I flashed it on a clean flash on ed300's cm12.1 and i also flashed kernel modules then the kernel and the wifi is not working. I also flashed super su at the end like always... Any workaround?
Have you tried the WiFi fix??insmod wlan.ko??

I am using cm13 32 bit and its running smooth...haven't test it on ed300 cm12.1
 
Last edited:

dev_harsh1998

Recognized Developer
Apr 25, 2014
895
4,791
Varanasi
There uh go

I flashed it on a clean flash on ed300's cm12.1 and i also flashed kernel modules then the kernel and the wifi is not working. I also flashed super su at the end like always... Any workaround?

Extract the File Attached And Place in "/system/etc/init.d" and Set permissions to rw-r-r and reboot wifi will work :)
 

Attachments

  • 01wlanon.zip
    196 bytes · Views: 1,165

Element24

Senior Member
Nov 25, 2015
277
108
Have you tried the WiFi fix??insmod wlan.ko??

I am using cm13 32 bit and its running smooth...haven't test it on ed300 cm12.1
Yes. It is working now!

For wifi bug take wlan.ko from panthom kernel zip and place it on /system/lib/modules/<here>
download the zip ,extract and paste the "01wlanon" in /system/etc/init.d and set permissions to rw- r-- r-- .
 

dev_harsh1998

Recognized Developer
Apr 25, 2014
895
4,791
Varanasi
Noted it

WOW! Awesome works dude.. Wants to try the kernel on cm12.1 by ed300 but, can i flashing it through telo kernel that ed300 giving? Bcoz in the main thread we must flash kernel modules before flash the kernel.. Last, why you not add smartmax gorvernors + autoSMP hp? For me its verygood at balanced setting in perf and battery.. Thanks

Will add in Next build
 
  • Like
Reactions: Gueztar

sasukay

Senior Member
Apr 12, 2014
701
331
Haridwar
technobabaon.wordpress.com
Nope Dosent Blasts It works Perfect kiss emoticon Actually i created New Potential Difference Across The Chip of 2.25*pe*areaofcapacitor3below the regulator3and along emmc/2*epsilon0 so heat Balances
Dont use it on MIUI its for Cm and Mokee BAsed Roms :3 <- Btw this is my personal innovation of maintaining new potential difference acros chip so mods now cant force me to upload it as i provided my basic git with all governers tweaks and stuff :)
Press thanks if i helped :)
Brother, is all this for real or you just made it up. I mean the ==PHYSICS== part. I always thought, it was just some coding that you change for optimization. But, never thought it at hardware level with capacitors, epsilon and stuff. :silly:
 

dev_harsh1998

Recognized Developer
Apr 25, 2014
895
4,791
Varanasi
Yup i Revolted All Regulators Capacitors


Brother, is all this for real or you just made it up. I mean the ==PHYSICS== part. I always thought, it was just some coding that you change for optimization. But, never thought it at hardware level with capacitors, epsilon and stuff. :silly:

It Was To Be One otherwise It will Fry Your Device After Flash I recoded and Revolted Almost All the Bus To Cross The Safelimits safely So made Calculations using Gauss Law the Final Issue Left Over Was The Arrangement Of The Left over .17 micro-farad Which I assigned to Camera's Dtsi To Get New And High Frequency For Detailed Images and Good Color reproduction As Its All my calculations It Depends upon me whether I public My Calculations Or Not Cause it almost took Me 45+ days To Bypass The Bus Frequency Limit Well If you Compile Over My Git you will Get A good Heater Kernel out ;)
:3 but Hell Yeah There Will Be Shown 1.8ghz And 650 Gpu But Those Will Be Written Values not The Actual one :3 that You got out Of phantom As is Using Another Potentail difference Physics is THUG dont underestimate It And Hell Yeah I have Also Not Violated Gpl cause all My additions Are There :3 I will Add Vibrator module There too Then Git Will Be Complete thereby Not Even Violating GPL
There Is No Where Written That Devs Can Assign New Potential Difference and use Bit Of reverse Engineering ;) Developing Has No Boundries It Depends upon How Far You Can Think

REGARDS
Dev_harsh1998
I know I am Weired Because To Get Oc Devs Assign New frequencies And I Made a new Potential Difference :p
 
Last edited:
  • Like
Reactions: kamilnazar

sasukay

Senior Member
Apr 12, 2014
701
331
Haridwar
technobabaon.wordpress.com
It Was To Be One otherwise It will Fry Your Device After Flash I recoded and Revolted Almost All the Bus To Cross The Safelimits safely So made Calculations using Gauss Law the Final Issue Left Over Was The Arrangement Of The Left over .17 micro-farad Which I assigned to Camera's Dtsi To Get New And High Frequency For Detailed Images and Good Color reproduction As Its All my calculations It Depends upon me whether I public My Calculations Or Not Cause it almost took Me 45+ days To Bypass The Bus Frequency Limit Well If you Compile Over My Git you will Get A good Heater Kernel out ;)
:3 but Hell Yeah There Will Be Shown 1.8ghz And 650 Gpu But Those Will Be Written Values not The Actual one :3 that You got out Of phantom As is Using Another Potentail difference Physics is THUG dont underestimate It And Hell Yeah I have Also Not Violated Gpl cause all My additions Are There :3 I will Add Vibrator module There too Then Git Will Be Complete thereby Not Even Violating GPL
There Is No Where Written That Devs Can Assign New Potential Difference and use Bit Of reverse Engineering ;) Developing Has No Boundries It Depends upon How Far You Can Think

REGARDS
Dev_harsh1998
I know I am Weired Because To Get Oc Devs Assign New frequencies And I Made a new Potential Difference :p
Brother, I really appreciate what you are doing..
You must be very good at physics. I actually, tried very hard, but didn't used to get the right answer back in the day when I studied this stuff. Kudos to you!!
I wish you could teach me too...but don't really have much time now-a-days. Maybe, after a few weeks.... :cool: :D
 

kamilnazar

Member
Feb 1, 2016
29
4
It Was To Be One otherwise It will Fry Your Device After Flash I recoded and Revolted Almost All the Bus To Cross The Safelimits safely So made Calculations using Gauss Law the Final Issue Left Over Was The Arrangement Of The Left over .17 micro-farad Which I assigned to Camera's Dtsi To Get New And High Frequency For Detailed Images and Good Color reproduction As Its All my calculations It Depends upon me whether I public My Calculations Or Not Cause it almost took Me 45+ days To Bypass The Bus Frequency Limit Well If you Compile Over My Git you will Get A good Heater Kernel out ;)
:3 but Hell Yeah There Will Be Shown 1.8ghz And 650 Gpu But Those Will Be Written Values not The Actual one :3 that You got out Of phantom As is Using Another Potentail difference Physics is THUG dont underestimate It And Hell Yeah I have Also Not Violated Gpl cause all My additions Are There :3 I will Add Vibrator module There too Then Git Will Be Complete thereby Not Even Violating GPL
There Is No Where Written That Devs Can Assign New Potential Difference and use Bit Of reverse Engineering ;) Developing Has No Boundries It Depends upon How Far You Can Think

REGARDS
Dev_harsh1998
I know I am Weired Because To Get Oc Devs Assign New frequencies And I Made a new Potential Difference :p
fbd.jpg

Awesome man.:good::good::good:
 

Top Liked Posts

  • There are no posts matching your filters.
  • 102
    attachment.php

    Phantom Kernel by Harsh!t Jain
    Unleash The Power! Wingtech msm8916 B|
    The Developer :- Be My friend On facebook :D
    Disclaimer
    Code:
    #include
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */


    Changelog

    Phantom Kernel-R1
    Hotplugs•Alucard

    •Mako

    •Zen-Decision

    •Bricked

    •AutoSMP

    •Intelliplug


    CPU Governors

    •ElementalX

    •Implulse

    •Barry-Allen

    •zzmoove

    •Lionfish

    •Conservative

    •Yankactive

    •Ondemand

    •And many many more

    GPU Governors


    •msm-adreno.tz

    •Simple

    •Ondemand

    •And many more


    I/O Scheduler
    •BFQ


    *Fiops

    *Cfq

    *Noop

    *Deadline

    *Bfq

    *Sio

    *Sio-Plus

    *zen

    *tripndroid

    *V(R)




    *NEON optimized kernel

    *CPU OC upto 1.8Ghz

    *GPU OC upto 720 Mhz

    *Powersuspend driver

    *Adreno-Idler

    *KSM tweaks

    *USB fast charge

    *Zram

    * New Primitive Integer Workcue

    *KCAL control

    *Zram

    *Camera frequency Bumped Up to 650mhz

    *Built with Linaro 4.9 Cortex a15

    *fsync toggle
    *Lots of more stuffs


    Phantom Kernel-R2



    *Built with Hyper 4.9 Toolchain

    *Resolved heating issue

    *Implemented Samsung Touch Driver for better touch latency

    *Fixed Deep Sleep issue

    *Added TCP Congestion Algorithm i.e. Westwood,Highspeed,etc

    *Many more

    Phantom-Kernel R3



    *Unlocked GPU OC upto 720 Mhz

    * Mild UnderVolt For Heat Reduction

    *Added Faux Sound

    *Added Msm Sleeper Hotplug

    *Adreno KGSL Update Merged Latest Adreno Kgsl Drivers



    Phantom-Kernel R4



    * Built with Sabermod*Uber 5.3 Toolchain

    *Xposed Random Reboots Fixed

    * Core Offlining Fixed

    *Hz values changed to 199

    *Fastcharge At its max 1579 (earlier was 850) Charge at crazy speeds

    *Rebased fully

    *Revolted Kernel

    *Optimized Tweaks


    Phantom-Kernel R5


    * Rebased Fully Again

    *Tweaked Thermal To Ultimate

    *Tweaked KSM to Unltimate

    *Ksm Check page Skip

    *Fixed Microphone Issue See Post 2 How to Fix the Mic

    *Heat = highest recorded 56 in outdoor Usage thanks to @adityaChandraBose For testing



    Phantom-Kernel R6


    *Stability Tweaks

    *Fixed Mic Gain And Speaker Gain In Faux Sound

    *Governors Added :- Smartmax , ElementalX(fixed Dropping Issue), Smartmax,Hellsactive

    *New i/o Schedulers :- Zen, TripNdroid,V(R)

    *Removed Shi!tty Hotplugs

    *Cleaned Defconfig

    *New Dirty Ratio

    *RADIO IS NOW WORKING

    Phantom-Kernel R7

    Changelogs :-
    ----------------Major Update-------------------
    0:- My Very Own Descision Making Module that fixed the Race Between Cores
    1:- Optimized Ghraphite Loop and -O3 -Ofast Major Optimizations
    2:- Removed All Dirct Dependencies From Hz
    3:- Removed Hotplug Control From Battery_current_limit(Intentionally Done by google to Duck Up perfermance)
    4:- Removed All Bad Code From code Aurora And Google
    5:- Removed All Dependencies From Powersuspend
    6:- Added State Notifier and State Helper Driver Rebased Kernel Over it First Kernel For Lenovo a6000/plus Based On State Helper Thanx To pranav (I ported but :3)
    7:- New Thermals (Intelli Thermals Currently Beta you may see frequncies going Up and Down While Chahging Cuase its port From hammerhead)
    8:- Latest Adreno Idler And Now Based On State Helper
    9:- Boosted Chanrge Speed by (69%) Compared to Phantom 4.0 <-r1
    10:-Latest Caf Tag For Wingtech Plus New Stream Changes From kernel.org
    11:-Major Tweaks To fiops io Schedular
    12:- Added SioPlus <- I/O Schedular
    13:- Now Fiops,SIOPLUS,Zen Wont overload cpu and eMMc
    14:- Default to NOATIME and NODIRATIME for FS performance improvement.
    15:- Fast ShutDown
    16:- Optimized Zram
    17:- Latest Cpu Litration For Cpu-Boost and New Call Alogrithm
    18:- Latest Wifi Driver from Code aurora
    19:- Improved Display Driver For Bit of Heat Reduction Confilicting to Thermal
    20:- Fixed Bootloop and qpnp Vibrator and Free MemCheck Claim For Fs
    20.5:- 2 Releases For Lp and MM



    Downloads Please Press the Thanks Button Below to Keep this Project Alive


    Download from here cm12.x 32Based Mokee and allPhantom r-7 Harsh!t Jain For Lollipop With Faux Sound
    Download From Here cm13.x&&cm12.x 32based All mm/lp Phantom r-7 Harsh!t Jain lp/mm without faux Sound



    Installation Instructions


    Minimum Requirements To Install Phantom Kernel:
    Recommended Custom Recovery TWRP and a Rooted Device

    Installation Procedure:
    *Boot Into Recovery Mode

    *Dirty flash the rom you are
    using (if needed gapps too)

    *Flash provided Kernel Zip

    *Wipe Cache and Dalvik

    *Reboot To System



    Important Information



    If you are on ED300 cm12.1 your sound and wifi will create problems so for this you have to flash Modules and then Kernel Thanks to @ED300 for modules you can download them from here
    (1)Flash the kernel.zip via Twrp (Not Directly Recommended Though :3 Cause i prefer Dirty Flash)

    (2) Flash the Wifi fix for cm based like ed300 cm12 and cm13 based roms here!!!Thanks to @crashdjent
    (3) Wipe Cache and Dalvik's Cache

    Thanks to My testers

    *@Sourav_8434
    (Big ^^ Thanks :3 For this therad otherwise this thread would have been still a mess to deal with)
    *Sagar Adhikari

    *Sudhakar

    *Akshat

    *Sanga

    *Sohaib​

    * A huge thanks to my testers and my Telegram Group seriously without them it wasn't possible !
    •And many more​

    XDA:DevDB Information
    |PhaNToM-LP||R-7~lp/mm32||O.C 1.8ghz/720Mhz||Uber-4.9-TC||Blazing-Fast||Stable|, Kernel for the Lenovo A6000/Plus

    Contributors
    dev_harsh1998, tarun93, dev_harsh1998
    Source Code: https://github.com/dev-harsh1998/Phantom-Kernel-a6k

    Kernel Special Features: OC - 1.8GHZ And GPU OC 720mhz

    Version Information
    Status: Stable
    Current Stable Version: 4.0
    Stable Release Date: 2016-05-23
    Current Beta Version: GHANTA
    Beta Release Date: 2016-01-19

    Created 2016-05-22
    Last Updated 2016-09-15
    13
    Set The Sound Settings Via Kernel Auditor Like this :)

    You will need kernel auditor to Fix the microphone go to kernel auditior -> go to sound settings via Thead Menu located on the top left of the app screen and slightly increase the Following 2 things 1:- Cam Coder Microphone Gain 2:- Camcoder Microphone Gain }- Both above 7 Problem Will be Fixed Screen Shots Attached For reference

    Q- Which rom Our Dev Uses? Is he stilll Stuck to Cm12.1?
    A:- No i am Using Source Built Pac man Rom with Latest Patches That i develop From Source Itself This rom is stable as its source built andI created patch to Every thing for this rom which means its far more stable
    11
    Current Status

    Name Changed to --The Cursed Kernel----
    On Gcc 5 the Official Way
    1-st Fixed Zen Descision
    2nd - Updated my own core freq relation Module
    3rd - Stable oc of 1.9ghz (1.88) achieved
    4th - battery Backup tweaks
    5th - upstreamed to 3.10.102 ?
    Status :- Fixing Faux sound mic Issue :)
    11
    Mates i am sorry actually getting it too latest caf tag messed it up i am making a new kernel and now as we have device tree ready
    we now got the f2fs support in kernel and recovery as well i am not leaving 32bit i will be switching to x64 bit builds of kernel and roms plus recovery as well for better future
    Yet there are beta builds with feather touch if you want me i can upload them :) but it has screen flickering issue :/ due to derps in kernel source Btw good new is roms are not too far we are working on it
    Link For Github fir f2fs supported kernel https://github.com/karthick111/android_kernel_wingtech_wt86518
    Link for latest recovery that booted and was welll working https://github.com/karthick111/android_device_wingtech_wt86518
    a big salute to this guy who is helping us @karthick mostwanted
    But we need couple of testers too i would be glad if you message me on telegram at dev_harsh1998
    :) we will make this device good with combined effort
    7
    New Kernel With Hell Lots Of Changes Coming Out :) Within 2 to 3 Days
    Changelogs :-
    ----------------Major Update-------------------
    0:- My Very Own Descision Making Module that fixed the Race Between Cores
    1:- Optimized Ghraphite Loop and -O3 -Ofast Major Optimizations
    2:- Removed All Dirct Dependencies From Hz
    3:- Removed Hotplug Control From Battery_current_limit(Intentionally Done by google to Duck Up perfermance)
    4:- Removed All Bad Code From code Aurora And Google
    5:- Removed All Dependencies From Powersuspend
    6:- Added State Notifier and State Helper Driver Rebased Kernel Over it First Kernel For Lenovo a6000/plus Based On State Helper Thanx To pranav (I ported but :3)
    7:- New Thermals (Intelli Thermals Currently Beta you may see frequncies going Up and Down While Chahging Cuase its port From hammerhead)
    8:- Latest Adreno Idler And Now Based On State Helper
    9:- Boosted Chanrge Speed by (69%) Compared to Phantom 4.0 <-r1
    10:-Latest Caf Tag For Wingtech Plus New Stream Changes From kernel.org
    11:-Major Tweaks To fiops io Schedular
    12:- Added SioPlus <- I/O Schedular
    13:- Now Fiops,SIOPLUS,Zen Wont overload cpu and eMMc
    14:- Default to NOATIME and NODIRATIME for FS performance improvement.
    15:- Fast ShutDown
    16:- Optimized Zram
    17:- Latest Cpu Litration For Cpu-Boost and New Call Alogrithm
    18:- Latest Wifi Driver from Code aurora
    19:- Improved Display Driver For Bit of Heat Reduction Confilicting to Thermal
    20:- Fixed Bootloop and qpnp Vibrator and Free MemCheck Claim For Fs
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone