Guys, I REALLY need some help.
I liked Batman ROM on my S7 edge and now I want try Ironman on my Note 8.
Although I have been flashing custom recoveries, ROMs and kernels since my Galaxy S2 , I am ashamed to admit that I have already tried to flash TWRP and Ironman about 3 times and each time when I boot the phone I am in Samsung jail again. Tomorrow ( after 28 days) , I´ll have OEM unlock again.
Can anyone *please* send me a guide (as in "the guide for the most stupid newbie in xda" ) on how to flash Iromman correctly on my Note 8 ?
I have done a lot of research and gathered information on various threads and my plan is to reproduce these steps:
1 Download TWRP, verity, magisk or super SU, the rom of your choice that does not hide the OEM unlock toggle
2 Transfer those files to a micro SD card.
3 Remove your sim(s) and insert the micro SD.
4 Go into developer and verify that your OEM switch is visible and in the on position. If it is not visible do not proceed until you have it.
5 Shut down the phone.
6 Boot into downloader by holding vol down/bix/power
7 Open odin and place the TWRP tar in AP
8 Connect the phone
9 Place your mouse curser over the start button on odin but DO NOT start it.
10 Press and hold the vol up/bix/power and do not release them until the entire flash is done and you are in TWRP.
11 While holding thse buttons use a spare finger to press the mouse button which you already placed over start in odin. The flash will go by quickly.
12 You are now in TWRP, swipe right to allow modification.
13 Select wipe.
14 Select format.
15 Type yes.
16 Go back to main menu and select reboot menu.
17 Select REBOOT RECOVERY, do not go to system.
18 When back in TWRP after rebooting recovery select wipe at main menu.
19 Do a factory reset.(= Wipe data, cache, and dalvik)
20 Go back to main menu.
21 Select install.
22. Flash the verity and encryption disabler.
23. Go back to main men.
24. Select wipe.
25 Do a factory reset.(= Wipe data, cache, and dalvik)
26 Go back to main menu.
27 Select install.
28 Choose either magisk or SU to flash and install it.
29 Go back to main menu
30 Select wipe
31 Do a factory reset.
32 At main menu select install and flash your rom IF IT DOES NOT include any lower level flash for the BL, CP etc.
33 Go back to main menu
34 Select wipe.
35 Factory reset. (= Wipe data, cache, and dalvik)
36 Reboot into system. You should be able to connect your wireless network and go through the setup process. Do not reboot until you have completed setup, enabled developer options, verified that you have an OEM unlock switch and that it is on. If it is on you should be able to reboot, go into recovery, etc. You should not flash a CSC, kernal, anything that alters the lower level firmware.
Anyone has a better idea ???
And if this suceeds, how do I flash new BL, MODEM, CSC, Kernels with going back to jail?
****PLEASE HELP !!!!**** ( I can NOT wait 7 more days)
THANK YOU VERY MUCH!!! :good::good::good::good: