• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Error flashing with Odin

Search This thread

rambacha

Member
Aug 14, 2012
48
20
Rosario
Hello, I have an S9 SM-G9600 from Argentina with Android 8 and security patches to July 2018.
I try to flash it with a stock rom but without carrier (ARO) and I get the following error:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 6512 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!! 
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003> 
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Any ideas?
Thank you.
P.D: Sorry for my poor english :(
 

Infinitodecimal

Senior Member
May 3, 2014
72
12
30
Same happened to me... first, have you done the oem unlock thing? If yes, then you'll have to wait 7 days WITHOUT rebooting/ turn off your phone. If you haven't done the OEM thing check the csc ( as far as i know ARO csc only has feb. update) and try to flash either CHO or TPA ( in my case I couldn't flash CHO but TPA went through). Try downloading the FW from sammfirm (updato and sammobile are tooooo slow) and remember to check the binary nature box so you can have the AP, BL, CP, CSC and home_CSC files. If you have any doubts DM me, I speak Spanish (I'm from Argentina too)
 
  • Like
Reactions: Sanefc and rambacha

dewletn

Member
Dec 10, 2009
5
0
Hey team I have a HK version of G9600 and I try to change the firmware to TPA or any other that is not Chinese but I couldn't update.
Below error is displayed every time I want to install. Also I noticed after every time I reinstall the cable my phone will switch to charge only mode from cable. I have to go to developer option to change it back to MTP. Please help!!!

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> apdp.mbn
<ID:0/007> msadp.mbn
<ID:0/007> persist.img.ext4
<ID:0/007> userdata.img.ext4
<ID:0/007> dqmdbg.img.ext4
<ID:0/007> Home Binary Download
<ID:0/007> Total Binary size: 5064 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> abl.elf
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
 

Infinitodecimal

Senior Member
May 3, 2014
72
12
30
Hey team I have a HK version of G9600 and I try to change the firmware to TPA or any other that is not Chinese but I couldn't update.
Below error is displayed every time I want to install. Also I noticed after every time I reinstall the cable my phone will switch to charge only mode from cable. I have to go to developer option to change it back to MTP. Please help!!!

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> apdp.mbn
<ID:0/007> msadp.mbn
<ID:0/007> persist.img.ext4
<ID:0/007> userdata.img.ext4
<ID:0/007> dqmdbg.img.ext4
<ID:0/007> Home Binary Download
<ID:0/007> Total Binary size: 5064 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> abl.elf
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

TPA is part of the OWO CSC (https://www.sammobile.com/firmwares/galaxy-s9/SM-G9600/TPA/) and the HK "variant" has the TGY CSC (https://www.sammobile.com/firmwares/galaxy-s9/SM-G9600/TGY/download/G9600ZHU3ARK1/243785/) although they're the same model the CSC is the one that doesn't allow you to flash it...
 

dewletn

Member
Dec 10, 2009
5
0
Can you please show me how can I change the ROM of my HK Galaxy S9?
As there are a lot of chinese characters all over the UI.
Sorry for misinformation. It's actually CHC (China Open) ROM.

My phone info is attached.
 
Last edited:

Infinitodecimal

Senior Member
May 3, 2014
72
12
30
Can you please show me how can I change the ROM of my HK Galaxy S9?
As there are a lot of chinese characters all over the UI.
Sorry for misinformation. It's actually CHC (China Open) ROM.

My phone info is attached.
Same there, apparently, the only CSCs capable of flashing other csc FW without any trouble are: CR AFG AFR ARO ATO AUT BGL BNG BRI BTC BTU CAC CAM CHO COO DBT DKR ECT EGY EON ETL EUR GLB ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MYM NEE NPL ORX PAK PHE PHN ROM SEB SEE SEK SER SIN SKZ SLK SMA STH THL THR TMC TPA TPH TTT TUN TUR WTL XEF XEH XEO XEU XFE XME XSG XSP XTC XXV ZTO*. The other CSCs aren't "swappable", so the only options are to either change the hole phone language and disable the apps in Chinese, OEM unlock, root and from there change the CSC or just change your phone to a 9600 that has TPA as the main CSC... is up to you :/

*https://www.reddit.com/r/GalaxyNote...if_your_phone_is_on_one_of_the_oxm_multi_csc/
 
Last edited:

dewletn

Member
Dec 10, 2009
5
0
Same there, apparently, the only CSCs capable of flashing other csc FW without any trouble are: CR AFG AFR ARO ATO AUT BGL BNG BRI BTC BTU CAC CAM CHO COO DBT DKR ECT EGY EON ETL EUR GLB ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MYM NEE NPL ORX PAK PHE PHN ROM SEB SEE SEK SER SIN SKZ SLK SMA STH THL THR TMC TPA TPH TTT TUN TUR WTL XEF XEH XEO XEU XFE XME XSG XSP XTC XXV ZTO*. The other CSCs aren't "swappable", so the only options are to either change the hole phone language and disable the apps in Chinese, OEM unlock, root and from there change the CSC or just change your phone to a 9600 that has TPA as the main CSC... is up to you :/

The problem is I am not getting the updates as supposed. My latest security update is May-2018 and I am a little skeptic about my phone now. And with applications that checks the info I am getting different baseband than the one with stock info. Can baseband, model no changed without rooting? As my Knox trigger is not triggered.
 

Infinitodecimal

Senior Member
May 3, 2014
72
12
30
Same there, apparently, the only CSCs capable of flashing other csc FW without any trouble are: CR AFG AFR ARO ATO AUT BGL BNG BRI BTC BTU CAC CAM CHO COO DBT DKR ECT EGY EON ETL EUR GLB ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MYM NEE NPL ORX PAK PHE PHN ROM SEB SEE SEK SER SIN SKZ SLK SMA STH THL THR TMC TPA TPH TTT TUN TUR WTL XEF XEH XEO XEU XFE XME XSG XSP XTC XXV ZTO*. The other CSCs aren't "swappable", so the only options are to either change the hole phone language and disable the apps in Chinese, OEM unlock, root and from there change the CSC or just change your phone to a 9600 that has TPA as the main CSC... is up to you :/

The problem is I am not getting the updates as supposed. My latest security update is May-2018 and I am a little skeptic about my phone now. And with applications that checks the info I am getting different baseband than the one with stock info. Can baseband, model no changed without rooting? As my Knox trigger is not triggered.
According to https://www.sammobile.com/firmwares/galaxy-s9/SM-G9600/CHC/ and sammfirm your phone should be on ARK1 which is running the november update (i guess) but if what you want are the latest updates i recommend you to download the FW and flash it (always staying with the CHC csc)
 

dewletn

Member
Dec 10, 2009
5
0
Hey all,

I downloaded and tried to install ARK1 and CSC is CHC and still not able to update to the latest firmware.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> apdp.mbn
<ID:0/007> msadp.mbn
<ID:0/007> persist.img.ext4
<ID:0/007> userdata.img.ext4
<ID:0/007> dqmdbg.img.ext4
<ID:0/007> Home Binary Download
<ID:0/007> Total Binary size: 5097 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> abl.elf
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Same happened to me... first, have you done the oem unlock thing? If yes, then you'll have to wait 7 days WITHOUT rebooting/ turn off your phone. If you haven't done the OEM thing check the csc ( as far as i know ARO csc only has feb. update) and try to flash either CHO or TPA ( in my case I couldn't flash CHO but TPA went through). Try downloading the FW from sammfirm (updato and sammobile are tooooo slow) and remember to check the binary nature box so you can have the AP, BL, CP, CSC and home_CSC files. If you have any doubts DM me, I speak Spanish (I'm from Argentina too)