Error when Flashing to WP7.5 (Again)

[ronald_delgeano]

Hi,
I had tried flashing WP 7 more than once, and until now i get this error
On My notebook :
An error has occurred
Read below for more information

Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)

Error Description:
Info: .\RSPL\RSPL.cpp (956)

And on my HD2 unit, the messages are :
USB Flasher Mode
Wait USB...USB
Layout...PC=8, ASI=4, OASI=-1
Erase
[ASIZE] START" 365 END: FC0 SIZE: C5B
PARTITION LAYOUT NEW
0: 0219 02A9 10 25
1: 02A9 0319 10 25
2: 0319 0359 10 25
3: 0359 0365 10 25
4: 0365 0FC0 10 25
5: 0FC0 0FC8 10 25
6: 0FC8 0FCC 10 25
7: 0FCC 1000 10 25
Erase...
D S: 0 E: 219
D S: 1 E: 2A9
D S: 2 E: 319
D S: 3 E: 359
D S: 4 E: 365
D S: 5 E: FC0
D S: 6 E: FC8
D S: 7 E: FCC
Save EMBR...
Default OS is WPH NAND...
Flashing 0 partition...0 [219-2A9] M0 OK A23E 288
Flashing 0 partition...0 [2A9-319] M0 OK BC51 2F1
Empty 2 Partition...OK
Flashing 3 Partiotion...3 [359-365] M0 OK D840 361
Flashing 4 Partiotion...4 [365-FC0] M2
And it stoped..

I had search everywhere and i found some thread that write about the error, but when i follow the instruction it didn't work.
So what should i do ?
Thanks,
Ronald

 

[assangflexx]

did you tried with "use last 24 partition block" under services in MAGDLR ?
Just something what pops in my head

 

[ronald_delgeano]

did you tried with "use last 24 partition block" under services in MAGDLR ?
Just something what pops in my head

Yup, Including that one & didn't work
Also i Had tried Format the SD from my notebook but still, it didn't work
Additional information : I Use 4Gb MicroSd
Thanks,
Ronald

 

[ikovac]

I'd try with another SD card before anything else. Or if you can try installing without an SD card. I am not sure that this is possible with mango though, but older versions could be installed without an SD card. Just to see if it is causing the problem.

 

[ronald_delgeano]

I'd try with another SD card before anything else. Or if you can try installing without an SD card. I am not sure that this is possible with mango though, but older versions could be installed without an SD card. Just to see if it is causing the problem.

This error happened when i use HD2O but didn't happen when i use XBMOD-Yuki ROM
What should i do ?
thanks

 

[mementototem]

This error happened when i use HD2O but didn't happen when i use XBMOD-Yuki ROM
What should i do ?
thanks

Did you try 'clear SD MBR' in Magldr?

 

[ronald_delgeano]

Did you try 'clear SD MBR' in Magldr?

I did that too and still got the error
thanks for replying,
Ronald

 

[Ricardo_gs]

I found this thread interesting, for various reason, still a open question and google put it in the front line.
when this error apears in mi HTC HD2 was for a bad flash when i tried the windows mobile 7.8 (problems with the drivers on my windows 7 desktop or garbage in the nand i dont know).
so i tried reflash and always with maldrg 1.13 and a ROM, file and fail.
do the 24mB nand trick and clean SD card and still failing
do a task29 clean and still failing.
change SD and still the failing
and always maldrg put me the warning htc hd2 fatal hit 3 when i do the hardware reset

so my problems was solved with a SD ROM loading trick (load the ROM via microSDcard) with a important warning, do that cleaning ROM with the STOCK MANUFACTURING ROM ( if your cellphone was a telstra reload the telstra ROM with the SD trick, if your phone was vodafone reload the vodafone ROM with te SD trick, if your phone was a T.mobile reload the tmobile ROM with the SD trick etc.....) why, well it will clean all the NAND, including HSPL and the Radio version, and return to windows mobile 6.5 again. to restart and reload windows 7.8 mobile again and it works great.
so problem solved