Exfat on Cyanogenmod

[bigbiff]

Hi, all I finally got around to using the port we did for TWRP and getting it working on CM 10.1. Here is the file http://goo.im/devs/bigbiff/exfat.zip

Let me know if you have issues.
Install:
1. Queue up CM (or other kang)
2. Queue up GAPPS
3. Queue up exfat.zip

It should mount it in init.d before vold can get its grubby hands on it and corrupt the fs.

Credits:
Andrew Nayenko - http://code.google.com/p/exfat/
FUSE - pactched to 2.9.2
http://forum.xda-developers.com/showthread.php?t=2149739

My github has fuse and exfat at https://github.com/bigbiff

 

[bigbiff]

Hi, all I finally got around to using the port we did for TWRP and getting it working on CM 10.1. Here is the file http://goo.im/devs/bigbiff/exfat.zip

Let me know if you have issues.
Install:
1. Queue up CM (or other kang)
2. Queue up GAPPS
3. Queue up exfat.zip

It should mount it in init.d before vold can get its grubby hands on it and corrupt the fs.

Credits:
Andrew Nayenko - http://code.google.com/p/exfat/
FUSE - pactched to 2.9.2
http://forum.xda-developers.com/showthread.php?t=2149739

My github has fuse and exfat at https://github.com/bigbiff

Updated:

fixed mounting partition in updater-script
fixed setting perms
fixed script to mount on the right directory

Working great on my 64 gb exfat. Just remember if you bork, get into windows and run chkdsk /f drive:

 

[ghettofreeryder]

Thanks, I was looking for this. Works great.

 

[ipandroid]

Will definitely try this..... I haven't any luck running a 64gb on any TW or AOKP ROM. Thanks.

 

[ipandroid]

Just flashed...... Confirmed my 64gb is finally writing and reading without corrupted files.... Thanks
:laugh:

 

[mircury]

This is great! This was one of the main reasons I had to switch from cyanogenmod, lack of exfat support.

 

[anson81]

GT-N7100

Will this work on Gt-N7100? coz i found this thread on AT&T.

 

[frewys]

Will this work on Gt-N7100? coz i found this thread on AT&T.

I just tried it for my ATT note 2. and I got it to work perfectly so far!! Probably should do a backup just to be sure for the future of my 64GB card.

Using Pacman ROM ported from 7100.

Good luck and thanks for this!! :good:

 

[tdamocles]

Hi, all I finally got around to using the port we did for TWRP and getting it working on CM 10.1. Here is the file http://goo.im/devs/bigbiff/exfat.zip

Let me know if you have issues.
Install:
1. Queue up CM (or other kang)
2. Queue up GAPPS
3. Queue up exfat.zip

It should mount it in init.d before vold can get its grubby hands on it and corrupt the fs.

Credits:
Andrew Nayenko - http://code.google.com/p/exfat/
FUSE - pactched to 2.9.2
http://forum.xda-developers.com/showthread.php?t=2149739

My github has fuse and exfat at https://github.com/bigbiff

Will this work on any 4.2.2 rom?

Sent from my GT-N7105 using Tapatalk 2

 

[bigbiff]

Will this work on any 4.2.2 rom?

Sent from my GT-N7105 using Tapatalk 2

Should work on any aosp rom. I am using cm10.1

 

[sethmajor]

I've got CM10.1 RC1 running on a d2att Galaxy S3, but my 64GB exFAT SanDisk comes up as "SD Card is blank or has unsupported file system" after applying exfat.zip. The card is fine under WIn7 chkdsk. Any ideas?

 

[bigbiff]

I've got CM10.1 RC1 running on a d2att Galaxy S3, but my 64GB exFAT SanDisk comes up as "SD Card is blank or has unsupported file system" after applying exfat.zip. The card is fine under WIn7 chkdsk. Any ideas?

Does it work in TWRP with exfat?

 

[sethmajor]

Does it work in TWRP with exfat?

I've got CWM v6.0.3.1, but it does not mount the card.

 

[bigbiff]

I've got CWM v6.0.3.1, but it does not mount the card.

Try running chkdsk on the card again, make sure the zip is flashed, then boot cm.

 

[tdamocles]

Will this work on any 4.2.2 rom?

Sent from my GT-N7105 using Tapatalk 2

I have a 4.2.2 rom flashed and setup already in fat32. Can I just format the card with the phone than flash this afterwards so it can read in exFat??

 

[bigbiff]

I have a 4.2.2 rom flashed and setup already in fat32. Can I just format the card with the phone than flash this afterwards so it can read in exFat??

Should work.

 

[sethmajor]

Try running chkdsk on the card again, make sure the zip is flashed, then boot cm.

Installed TWRP 2.5 for d2att, the card can be mounted from there. However, booting into CM10.1 RC1 and card still reported as blank / unmounted.
Le sigh.

 

[bigbiff]

Installed TWRP 2.5 for d2att, the card can be mounted from there. However, booting into CM10.1 RC1 and card still reported as blank / unmounted.
Le sigh.

Can you verify that the install worked?

 

[tdamocles]

Should work.

Worked fine....

Sent from my GT-N7105 using Tapatalk 2

 

[tdamocles]

I've got CM10.1 RC1 running on a d2att Galaxy S3, but my 64GB exFAT SanDisk comes up as "SD Card is blank or has unsupported file system" after applying exfat.zip. The card is fine under WIn7 chkdsk. Any ideas?

I had exFat working on xylon 2.7.7 for 3 days but today I got that same error. Phone did not see extSdcard. Chkdsk did seem to fix it but what could have caused this?

Sent from my Nexus 7 using Tapatalk HD