Extreme Syndicate ROM Discussion Thread

Status
Not open for further replies.

elliwigy

Forum Moderator / Recognized Developer
Staff member
Mar 16, 2011
12,911
8,784
253
Phoenix
www.sampwnd.com
Hey Everyone!

I am at it again! I have made leaps today with my custom ROM.

It is not ready for release just yet but wanted to get a thread started for when it is ready, to get some opinions and further clarification.

Required:

1) Any G930 US Variant
2) Must be on the G930U PEH firmware prior to my ROM
3) Rooted with Flashfire
4) I highly recommend you know how to push apks. It will start out lightly debloated but will be extremely debloated by the time I finish!

What will it contain in v1?

1) Pre rooted
2) Debloated
3) Xposed
4) V4A
5) Might be missing stuff for v1, wait and see!

Suggestions?

Please post early suggestions below. They might not be considered for build 1 but will all beconsidered as we go.

Questions?

1) Maybe someone can chime in but to my knowledge the U firmware will work on any US variant S7? I am asking for clarification since my reasoning of using the U firmware is for it to be useable on all US variants to avoid having to develop for every variant separately (I dont have time for this.)

Credits:
Chainfire
psouza
JrKruse
bR3w3r
More to come when released!

Paypal email:

[email protected]

(Remember, donations are NOT required as we do this for fun and for FREE!)
 

elliwigy

Forum Moderator / Recognized Developer
Staff member
Mar 16, 2011
12,911
8,784
253
Phoenix
www.sampwnd.com
I suggest you don't be selfish and hook you boy with the s7 edge up with a Rom :) :p 'U' version only keep it simple
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.

im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
 

TechBSwift

Senior Member
Jul 14, 2010
2,495
1,386
0
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.

im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
I know that's why I said that lol. Good to see you at it again. If I recall you work like 60 hours a week and that's only one of your jobs lol jk
 
  • Like
Reactions: elliwigy

RockyCJC

Senior Member
Jun 15, 2011
109
33
0
Richmond, VA
Hey Everyone!

I am at it again! I have made leaps today with my custom ROM.

It is not ready for release just yet but wanted to get a thread started for when it is ready, to get some opinions and further clarification.

Required:

1) Any G930 US Variant
2) Must be on the G930U PEH firmware prior to my ROM
3) Rooted with Flashfire
4) I highly recommend you know how to push apks. It will start out lightly debloated but will be extremely debloated by the time I finish!

What will it contain in v1?

1) Pre rooted
2) Debloated
3) Xposed
4) V4A
5) Might be missing stuff for v1, wait and see!

Suggestions?

Please post early suggestions below. They might not be considered for build 1 but will all beconsidered as we go.

Questions?

1) Maybe someone can chime in but to my knowledge the U firmware will work on any US variant S7? I am asking for clarification since my reasoning of using the U firmware is for it to be useable on all US variants to avoid having to develop for every variant separately (I dont have time for this.)

Credits:
Chainfire
psouza
JrKruse
bR3w3r
More to come when released!

Paypal email:

[email protected]

(Remember, donations are NOT required as we do this for fun and for FREE!)
1. Will you provide links to or host a copy of the G930U PEH firmware?
2. I suppose that since this is the universal firmware, Verizon's Mobile Hotspot provisioning will not prevent us from using Native Mobile Hotspotting....can you confirm...and if not, can you apply a a modded version of the Mobile Hotspot software that bypasses the provisioning (similar to what psouza has done with his VZW debloat script for PE1)
 

Illogi.xbone

Senior Member
Mar 22, 2015
752
154
0
29
Beatrice
www.youtube.com
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.

im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
Just using flashfire?

---------- Post added at 01:08 PM ---------- Previous post was at 12:27 PM ----------

technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.

im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
Where did you find his rom? How's battery?
 

elliwigy

Forum Moderator / Recognized Developer
Staff member
Mar 16, 2011
12,911
8,784
253
Phoenix
www.sampwnd.com
1. Will you provide links to or host a copy of the G930U PEH firmware?
2. I suppose that since this is the universal firmware, Verizon's Mobile Hotspot provisioning will not prevent us from using Native Mobile Hotspotting....can you confirm...and if not, can you apply a a modded version of the Mobile Hotspot software that bypasses the provisioning (similar to what psouza has done with his VZW debloat script for PE1)
I can upload the U firmware..i cant remember where i got it

For hotspot you can use the zips already available by psouza if in not mistaken.. i dont use hotspot so ill need ppl to let me kno when i release build 1
 

elliwigy

Forum Moderator / Recognized Developer
Staff member
Mar 16, 2011
12,911
8,784
253
Phoenix
www.sampwnd.com
Just using flashfire?

---------- Post added at 01:08 PM ---------- Previous post was at 12:27 PM ----------



Where did you find his rom? How's battery?
1) I am going to use a rom.zip but you will still need the eng boot to have root i believe so odin 930U then root usig eng boot then flash my ROzm in FF

2) his rom is in the vzw s7e forum
 

RockyCJC

Senior Member
Jun 15, 2011
109
33
0
Richmond, VA
I can upload the U firmware..i cant remember where i got it

For hotspot you can use the zips already available by psouza if in not mistaken.. i dont use hotspot so ill need ppl to let me kno when i release build 1
The zips provided by psouza are for the PE1 build only. He mentioned somewhere in his thread that it has to be compiled for each build.

Sent from my SM-G930V using Tapatalk
 

elliwigy

Forum Moderator / Recognized Developer
Staff member
Mar 16, 2011
12,911
8,784
253
Phoenix
www.sampwnd.com
Is the goal here to remedy the battery life issues and CPU hangs that the eng boot/root process created? I'm excited!
I recommend you check out my other rom threads to see what the goal is..

essentially I shoot for an extremely debloated rom which typically does include better speed and battery life but that is more of a side effect imo
 

elliwigy

Forum Moderator / Recognized Developer
Staff member
Mar 16, 2011
12,911
8,784
253
Phoenix
www.sampwnd.com
The zips provided by psouza are for the PE1 build only. He mentioned somewhere in his thread that it has to be compiled for each build.
Not necessarily. some of it does work.. ideally however i like to bake things in.. the less zips to flash the better.. i wont worry too much as i dont release roms that dont work well to begin with
 
  • Like
Reactions: RockyCJC

psouza4

Inactive Recognized Developer
Feb 26, 2009
746
853
0
Meridian, ID
www.PeterSouza.com
The zips provided by psouza are for the PE1 build only. He mentioned somewhere in his thread that it has to be compiled for each build.

Sent from my SM-G930V using Tapatalk
The fix/fix+debloat zip that disable Verizon's Wi-Fi hotspot tethering provisioning does so by writing a modified framework-res.apk to the device, therefor it needs to match the firmware version. The patch is not complicated though (it's literally just changing/clearing two XML values), so anyone could decompile a different version, patch the xml, recompile, re-sign, and bundle that for any Verizon firmware version.
 

elliwigy

Forum Moderator / Recognized Developer
Staff member
Mar 16, 2011
12,911
8,784
253
Phoenix
www.sampwnd.com
The fix/fix+debloat zip that disable Verizon's Wi-Fi hotspot tethering provisioning does so by writing a modified framework-res.apk to the device, therefor it needs to match the firmware version. The patch is not complicated though (it's literally just changing/clearing two XML values), so anyone could decompile a different version, patch the xml, recompile, re-sign, and bundle that for any Verizon firmware version.
Gotcha.. its not my top priority to be honest but its not difficult to do so ill most likely do it
 

CVertigo1

Senior Member
May 20, 2015
1,101
668
0
Richmond, VA
@elliwigy, I have used your ROMs in the past. Needless to say, I'm excited to see you are making one for the Verizon S7!

---------- Post added at 04:46 PM ---------- Previous post was at 04:46 PM ----------

[/COLOR @elliwigy, I have used your ROMs in the past. Needless to say, I'm excited to see you are making one for the Verizon S7!
 
  • Like
Reactions: elliwigy

elliwigy

Forum Moderator / Recognized Developer
Staff member
Mar 16, 2011
12,911
8,784
253
Phoenix
www.sampwnd.com
When does the FC happen exactly? I've had this issue when modifying ROMs, so I might be able to help.
if i leave setup wizards in it fcs when it trys to set up the google acct during initial setup so i cant get past the setup..

if i remove both wizards it just fcs whenever trying to add a google acct..

i didnt remove any google apks so it must be lookin for something else i removed.. i will start from scratch tom. evening or Sunday.
 
  • Like
Reactions: JediDru
Status
Not open for further replies.