[FACTORY STOCK] GS4 Stock Firmware Odin Package- Original Factory ROM

[AdamOutler]

This will only work for Windows!

Downloads
Get the Odin Flashing Tool: http://forum.xda-developers.com/attachment.php?attachmentid=1168421&d=1341114315
Get this Firmware Package (very large): http://www.hotfile.com/dl/210140535/c7c4d28/I337UCUAMDB_I337ATTAMDB_ATT.zip.html
mirror: http://storagecow.eu/index.php?dir=Xda/AT&T+S4/Stock+Odin/
mirror: http://www.135.a.hostable.me/public/I337UCUAMDB_I337ATTAMDB_ATT.zip

Instructions

1. extract I337UCUAMDB_I337ATTAMDB_ATT.zip in your downloads folder
2. Open Odin
3. Click PDA
4. Navigate to where you extracted the firmware and select it
5. Hold Volume Down + Home + Power until your device enters Download(Odin) Mode, then press volume up.
6. Connect the device to the computer and hit Start in Odin.
7. Stand back from the device and the computer until its complete.

Flashing Tips
Always use a GOOD USB cable, preferably stock.
Always use a good USB port in the back of the computer.
Always set the device in a good position where it will not become disconnected or disturbed.
Above all, Always use Heimdall over Odin when it becomes available. It's not available yet.

How to make a firmware like this
I was actually uploading a copy from my own computer obtained via exploit from bfielding's device, and I decided to try kies. The official package is a much better idea. Samsung Kies requires that you put in your model and serial, then it downloads the firmware in an encrypted package, extracts it, flashes it and deletes it. There's a short window where you can get in and grab the firmware.

Kies downloads to a temporary file called (in my case) C:\Users\Adam\AppData\Local\Temp\tmp####.tmp (where # is an integer less than 10). When the firmware is extracted, it goes into a new folder called C:\Users\Adam\AppData\Local\Temp\tmp####\. Yank that and put it on hotfile .

 

[appdroid]

Nice work as always sir!

Sent from my SAMSUNG-SGH-I317 using xda premium

 

[creepyncrawly]

Just checked. The download for this is available on sammobile.com/firmware. It wasn't there a couple of hours ago, well sometime this afternoon.

 

[AdamOutler]

Just checked. The download for this is available on sammobile.com/firmware. It wasn't there a couple of hours ago, well sometime this afternoon.

There was alot going on and I had multiple windows up. I created one in Linux from bfielding's device, was uploading it to hotfile, uploading one from Kies, and was sent this link too somewhere in the mix. I guess I lost my upload link. Oh well, looks like we're using the Sammobile version.

 

[hyelton]

Just checked. The download for this is available on sammobile.com/firmware. It wasn't there a couple of hours ago, well sometime this afternoon.

I was waiting for it too.

Uploading it to my Server now for Faster download

 

[stevehkim]

Your a beast Adam!

Deviance runs in the blood...
BMS fueled.
4.2.2

 

[renskie]

we will make it a mirror link for faster download

 

[Bradl79]

Does this mean if we screw up we can go back to stock

 

[howtomen]

Does this mean if we screw up we can go back to stock

Yes this is exactly what it means

sgh-i747(d2att)(sgs3) on latest cm10.1 or ultimatum

 

[AdamOutler]

Does this mean if we screw up we can go back to stock

Yes thats the idea.

 

[raqball]

Rock on Adam, rock on! :good:

 

[CarpeNoctem]

Yes thats the idea.

@AdamOutler, based on your video on the other thread, the motherboard of the ATT and the TMo version of the S4 are the same, does it mean that if flash the TMo version of the ROM on the ATT it may unlock the bootloader or are those two distinctive matters ?

 

[AdamOutler]

@AdamOutler, based on your video on the other thread, the motherboard of the ATT and the TMo version of the S4 are the same, does it mean that if flash the TMo version of the ROM on the ATT it may unlock the bootloader or are those two distinctive matters ?

NO! the signatures are different. You'll brick your device, but I'm not sure to what extent.

 

[alacrify]

Ninja'd

 

[Zer0_]

I was just talking to my friend who works at Koodo (Canada). They receive their S4s tomorrow, and I had make sure he places a hold on one of them for me!
Using the steps you provided in your OP, I'll upload Koodo's ROM tomorrow!

 

[dc2rjun]

THANK YOU!!

This will only work for Windows!

Downloads
Get the Odin Flashing Tool: http://forum.xda-developers.com/attachment.php?attachmentid=1168421&d=1341114315
Get this Firmware Package (very large): http://www.hotfile.com/dl/210140535/c7c4d28/I337UCUAMDB_I337ATTAMDB_ATT.zip.html

Instructions

1. extract I337UCUAMDB_I337ATTAMDB_ATT.zip in your downloads folder
2. Open Odin
3. Click PDA
4. Navigate to where you extracted the firmware and select it
5. Hold Volume Down + Home + Power until your device enters Download(Odin) Mode, then press volume up.
6. Connect the device to the computer and hit Start in Odin.
7. Stand back from the device and the computer until its complete.

Flashing Tips
Always use a GOOD USB cable, preferably stock.
Always use a good USB port in the back of the computer.
Always set the device in a good position where it will not become disconnected or disturbed.
Above all, Always use Heimdall over Odin when it becomes available. It's not available yet.

How to make a firmware like this
I was actually uploading a copy from my own computer obtained via exploit from bfielding's device, and I decided to try kies. The official package is a much better idea. Samsung Kies requires that you put in your model and serial, then it downloads the firmware in an encrypted package, extracts it, flashes it and deletes it. There's a short window where you can get in and grab the firmware.

Kies downloads to a temporary file called (in my case) C:\Users\Adam\AppData\Local\Temp\tmp####.tmp (where # is an integer less than 10). When the firmware is extracted, it goes into a new folder called C:\Users\Adam\AppData\Local\Temp\tmp####\. Yank that and put it on hotfile .

 

[CarpeNoctem]

NO! the signatures are different. You'll brick your device, but I'm not sure to what extent.

Thanks but let's take an stupid case scenario:

1. ATT device
2. TMo odin ROM
3. try to flash 2 onto 1
4. Fail or succeed
5. if succeeds -> bootloader unlocked ?
6. if fails -> can we flash back ATT odin rom now we have it?

 

[jcase]

If it flashed, which it wont, then you would now uave bootloaders with the wrong signature and would need to jtag it

 

[Relys]

You the man Adam!

 

[CarpeNoctem]

If it flashed, which it wont, then you would now uave bootloaders with the wrong signature and would need to jtag it

ok, so basically the signature is check before the flash of the rom. so if my understanding is correct the solutions would be to

1. disable the check of the signature
2. have the TMo rom with the ATT signature to flash the unlocked bootloader
3. change the bootloader with a non-signed version

Please correct me if I am wrong, I am new at this and I am trying to understand what Adam explains in the other thread but I am sometime very confused (and not knowledgeable enough)