Finally found the perfect case + TGSP combo

[sn0warmy]

Since I initially purchased my OnePlus 6 at launch, I've gone through a few different screen protectors and cases, including the OEM Nylon Bumper Case. While the Nylon Bumper Case was my previous favorite, I'm finding that the Spigen Rugged Armor case, paired with the Orzly TGSP, is absolutely perfect. The overall size of the Spigen case is almost identical to the OEM Nylon Bumper, so it isn't adding any more noticeable bulk. The added bonus is that the Spigen case hugs the top, bottom and sides of the Orzly protector with no gaps anywhere. There was a bit of a gap between the Orzly protector and the Nylon Bumper Case.

In addition, the buttons on the Spigen case are just as 'clicky' as the OEM Nylon Bumper Case while providing just a tad more of a gap between the back camera and the outside of the case, thus providing a little more protection for the back camera.

Overall, I am extremely happy and would highly recommend this combo. Admittedly, my previous Orzly screen protector was installed slightly off center, causing it to lift when the Spigen case was installed. However, I uninstalled that protector, cleaned the screen and re-installed my spare Orzly protector with the Spigen case installed, for perfect guidance. The end result is even better than I expected.

Anyway, on to pics...

Amazon Link for Spigen Rugged Armor
Amazon Link for Orzly Screen Protector

 

[h0LLe]

Looks good... Beside the fact that I can't see the desigm of the spigen cases anymore. Don't they have somekind of design department? I'm tired of the look.

 

[netgar]

Looks like there is not too much lip to protect the screen. I have original tg and bought few cases. Ended up with nylon op6 case. Still not pleased that the side of the screen are partially covered by original op6 TG.
I'm you like your combo.

 

[RiTCHiE007]

lol i take some gap over the ugly ass case and screen protector that not covers the whole screen bro but thanks for sharing anyways and hope others find it useful

 

[sn0warmy]

Looks like there is not too much lip to protect the screen. I have original tg and bought few cases. Ended up with nylon op6 case. Still not pleased that the side of the screen are partially covered by original op6 TG.
I'm you like your combo.

The lip of the case is only a few mm above the screen protector. So not a lot of protection there. I'd say the lip is about the same height as the OEM nylon case.

Looks good... Beside the fact that I can't see the desigm of the spigen cases anymore. Don't they have somekind of design department? I'm tired of the look.

Yeah, the case could definitely use a revamp. They've used the same design for like the last 2 years on all the phones they make this case for.

lol i take some gap over the ugly ass case and screen protector that not covers the whole screen bro but thanks for sharing anyways and hope others find it useful

LOL what? The screen protector is full coverage. There's no other TGSP that covers more of the screen. Also, learn how to use punctuation. Trying to read your odd comments is like trying to read letters from my 10 year old niece.

 

[RiTCHiE007]

The lip of the case is only a few mm above the screen protector. So not a lot of protection there. I'd say the lip is about the same height as the OEM nylon case.



Yeah, the case could definitely use a revamp. They've used the same design for like the last 2 years on all the phones they make this case for.



LOL what? The screen protector is full coverage. There's no other TGSP that covers more of the screen. Also, learn how to use punctuation. Trying to read your odd comments is like trying to read letters from my 10 year old niece.

The original protector covers the whole screen but im a big fan of the soft nano tpu protectors that i can apply wet and **** a punctuation bro.

 

[x111]

.

Spigen Rugged is a trash case with minimal protection, I'm using the same one while waiting my otterbox.

also, your screen protector is trash as well since it cover too much and can be easily pilled.

 

[sn0warmy]

The original protector covers the whole screen but im a big fan of the soft nano tpu protectors that i can apply wet and **** a punctuation bro.

Spigen Rugged is a trash case with minimal protection, I'm using the same one while waiting my otterbox.

also, your screen protector is trash as well since it cover too much and can be easily pilled.

Well, this is the last time I try to provide a positive contribution to this forum, which is now seemingly overrun by whiny children.

 

[netgar]

My friend I didn't mean to offend anyone. Thx for sharing. Im still looking TG that doesnt cover the sides of the screen. I used spigen on all my phones. First time I didnt keep one for op6.
As long you are happy...

 

[yldlj]

Spigen Rugged is a trash case with minimal protection, I'm using the same one while waiting my otterbox.

also, your screen protector is trash as well since it cover too much and can be easily pilled.

Is there anything you like?

Sent from my OnePlus6 using XDA Labs

---------- Post added at 03:15 AM ---------- Previous post was at 03:11 AM ----------

Well, this is the last time I try to provide a positive contribution to this forum, which is now seemingly overrun by whiny children.

I really like my orzly screen protector as well. I'm using it with the orzly case atm. I tried putting on my spigen case but it lifted the tgsp. I guess you need to apply the protector while in the spigen case to get it perfectly aligned.

Sent from my OnePlus6 using XDA Labs

 

[sn0warmy]

My friend I didn't mean to offend anyone. Thx for sharing. Im still looking TG that doesnt cover the sides of the screen. I used spigen on all my phones. First time I didnt keep one for op6.
As long you are happy...

Oh don't worry, I wasnt referring to you. In fact, I actually agreed with what you said about the case.

My coments we're directed at these other clowns who only post negative comments and never contribute anything useful to the forum.

 

[RiTCHiE007]

Well, this is the last time I try to provide a positive contribution to this forum, which is now seemingly overrun by whiny children.

Dude, stop being this softy! I said this is a good post and even tho its not for me i said that some might find this information usefull but then you came back at me with your stupid punctuation answer so what did you expect?

Im happy for you that you found the perfect combo and i know from my own experience that it can be a long road to find the perfect combination so this is why i said its good that you shared this info for others to read.

Also i dont think you should get in this defense this easy because you know on internet you get a more realistic response if people like it or not so you should have a bit more respect for your self and not take the bad comments, in your eyes, that serious

I think the screen protector is **** because it doesn't cover the notch and i hated this on the official screen protector also that came with the phone so i bought the official glass protector but since im hearing stories about it covering the screen due to the black borders, i didn't even take the the trouble to install it and went straight for other protectors with a all transparant top.

I have tried many cheap glass protectors but they all where **** due to the fact that all had problems with the edges and this is why i went to try the soft TPU nano protectors that i also used on my galaxy s7..... and guess what? I think they still are 1 of the best protectors in general because they wont raise the screen and i love the feel when i swipe my finger over it!

They also dirty cheap and easy to replace and when you apply it wet then its so easy to install so these are my go to protectors from now one in combination with the Nylon case.

---------- Post added at 11:08 AM ---------- Previous post was at 11:03 AM ----------

Well, this is the last time I try to provide a positive contribution to this forum, which is now seemingly overrun by whiny children.

Oh don't worry, I wasnt referring to you. In fact, I actually agreed with what you said about the case.

My coments we're directed at these other clowns who only post negative comments and never contribute anything useful to the forum.

Also how do you know that the clowns never contribute anything good to the forum? Have you checked all their history on the forums or are you just stating something you didn't check?

You just proved my point that not everything said on a forum has to be kind BUT it has to be respectful and honest which most of us did..... But to get back at the subject


I think the case you got on now doesn't look that great and this is why i think the nylon is a much better option

 

[Chinaroad]

Happy to see that, because i got that case from another brand, but it's the same one lol, and i'm waiting for the shippment of the orzly's

 

[sn0warmy]

...
I think the screen protector is **** because it doesn't cover the notch and i hated this on the official screen protector also that came with the phone so i bought the official glass protector but since im hearing stories about it covering the screen due to the black borders, i didn't even take the the trouble to install it and went straight for other protectors with a all transparant top.

I have tried many cheap glass protectors but they all where **** due to the fact that all had problems with the edges and this is why i went to try the soft TPU nano protectors that i also used on my galaxy s7..... and guess what? I think they still are 1 of the best protectors in general because they wont raise the screen and i love the feel when i swipe my finger over it!

If you had just provided details like this from the beginning, your initial negative comments would have made a lot more sense and not sounded like you were just complaining to complain.

Also how do you know that the clowns never contribute anything good to the forum? Have you checked all their history on the forums or are you just stating something you didn't check?

The "Thanks" meter is a d*** good indicator of positive contribution. When you've been around here for 7 years, posted 790 times and only have 124 instances where your post helped someone, that's a clear sign that most of your time here has not been used to contribute useful things for others. Maybe consider that next time, before coming into the thread that someone created to try and help others, simply to bash it with negative comments. It's not helpful and it quickly derails threads for no reason.

It's perfectly fine to disagree. And as I said just before, if you had provided the details you just did in your last post right from the beginning, it would have probably sparked a worthwhile conversation. But you chose not to and now here we are.

 

[RiTCHiE007]

If you had just provided details like this from the beginning, your initial negative comments would have made a lot more sense and not sounded like you were just complaining to complain.



The "Thanks" meter is a d*** good indicator of positive contribution. When you've been around here for 7 years, posted 790 times and only have 124 instances where your post helped someone, that's a clear sign that most of your time here has not been used to contribute useful things for others. Maybe consider that next time, before coming into the thread that someone created to try and help others, simply to bash it with negative comments. It's not helpful and it quickly derails threads for no reason.

It's perfectly fine to disagree. And as I said just before, if you had provided the details you just did in your last post right from the beginning, it would have probably sparked a worthwhile conversation. But you chose not to and now here we are.

its not bashing at all but just my opinion and if you re-read my first comment you would know! 2nd, lots of people dont even know where the thanks meter can be found or dont even care about things like that, just like me.

 

[sn0warmy]

its not bashing at all but just my opinion and if you re-read my first comment you would know! 2nd, lots of people dont even know where the thanks meter can be found or dont even care about things like that, just like me.

LOL! :laugh: You can't be serious. The "Thanks" button is literally 2 buttons away from the "Reply" button that you (and everyone else) use on a daily basis. So I find it very hard to believe that "lots of people" don't know where it is. People seem to have no trouble finding it when someone posts something useful.

Anyway, this is an endless hole of bickering for no reason. I appreciate your comments and hope you have a great weekend. Cheers! :highfive:

 

[mdl054]

Hey don't worry about those rude folks, thanks for posting your experience. Doesn't this Orzly protector have a black border? Do you find it cuts any of the viewable screen off? I've got the same case, currently using a soft film protector but I'm not satisfied with it and am only using it to prevent damage.

 

[yldlj]

Hey don't worry about those rude folks, thanks for posting your experience. Doesn't this Orzly protector have a black border? Do you find it cuts any of the viewable screen off? I've got the same case, currently using a soft film protector but I'm not satisfied with it and am only using it to prevent damage.

Yes the protector does have a black border. It does cut off a tiny bit of screen but nothing to even notice. On mine I can still see the time on the top left and the battery icon on the right. People say it cuts of some writing while in fastboot mode but I haven't checked. I haven't noticed anything cut off from the border.

Sent from my OnePlus6 using XDA Labs

 

[sn0warmy]

Hey don't worry about those rude folks, thanks for posting your experience. Doesn't this Orzly protector have a black border? Do you find it cuts any of the viewable screen off? I've got the same case, currently using a soft film protector but I'm not satisfied with it and am only using it to prevent damage.

Yep. As yldlj said, it cuts off a very tiny portion of the left and right sides. In normal usage you'd never notice it though. Other than in Fastboot, I haven't found a single app that pushes text far enough out that the TGSP border cuts it off.

Yes the protector does have a black border. It does cut off a tiny bit of screen but nothing to even notice. On mine I can still see the time on the top left and the battery icon on the right. People say it cuts of some writing while in fastboot mode but I haven't checked. I haven't noticed anything cut off from the border.

I can confirm that it cuts off the very far edge of text while in Fastboot mode. This is the only time I've ever noticed it actually cutting anything off. But that's mainly because the text in Fastboot goes way to far to the screen edges and doesn't wrap- around to the next line where it should.

 

[voolandis]

Spigen Rugged is a trash case with minimal protection, I'm using the same one while waiting my otterbox.

also, your screen protector is trash as well since it cover too much and can be easily pilled.

I have to disagree. I used this very case for HTC 10, S7, P10, Pixel and now OP6.
It saved my phone and my wallet so many times.