Finally, Tempered glass inexpensive full back adhesive for the Note

[ayinde6]

Someone finally did it, a Tempered glass inexpensive full back adhesive for the Note 8, not just the edges. I have to say first that I was VERY Skeptical of this tempered glasses claim to have full adhesive and stick to the phone properly. I am one of those people who has literally tried an insane amount of tempered glasses I think Amazon had to offer, finally settling on the Dome Glass but if /when it breaks you are shelling out another 45 bucks plus the install procedure can be a bit much for some.
But anyway this tempered glass went on so easy with the provided guard rail I truly couldn’t believe it. It laid down and adhered to the phone with a little help from the provided squeegee then I just pressed the edges down and voila!! The ENTIRE glass protector lays down edges and everything no bubbles. Went on just as easy as a tempered glass for a flat screen. This tempered glass is just what I have been looking for since I got my Note 8. Well done… SingularityProducts
Pros:
1. Very easy install with tools provided
2. True tempered glass
3. Fingerprints and smudges are minimal and wipe off easily
4. No dot matrix
5. Touch screen sensitivity stayed not hampered
6. Was $13.89 when I bought mine, but now I see it is $18.89 still better than $45, $34, etc the others with this claim cost
Cons:
1. I truly could not think of one con, very happy with this product I am buying another right now in case this one breaks
2. Price increase from $13.89 to $18.89

https://www.amazon.com/gp/product/B077GSJ55T/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

 

[browniegirl]

Pics or I don't believe it

Sent from my Pixel 2 XL using Tapatalk

 

[raphael.atienza]

I think I got something similar to this. Php 1,300 so around $25.

It isnt full coverage (It cuts the screen and leaves the curve where it drops off exposed) and this first one I got had a flaw in the adhesive and has 3 permanent bubbles on the adhesive itself.

I had this replaced then on the second one was perfect. No bubbles. Although one speck of dust made it through. It isn't easy to install and requires a lot of patience and slow application to get the bubbles out.

Technique for the is to let it adhere on the top then slowly work it to the bottom. Starting with the center then working to the edges also works but takes more time. It may have also caused the permanent bubbles to the adhesive as the seller who sold me this forced to press the bubbles out instead of working it out to the edges.

Pictures of the box, kit, and on the Note 8 to follow in a bit.
With the effort for this and the non full coverage I might consider the Whitestone Dome because I am tired trying out different protectors.

I have tried TPU (issue is the s-pen leaves marks on the protector), various edge adhesive protectors (some fit well some don't but all have the dot matrix and eventually dust gets in and in my use case of using the phone while walking in the rain water gets in), and finally this full adhesive but NOT FULL COVERAGE ONE). So far this is the best I have tried BUT lint still gathers on the edges and is driving me bonkers with the cleaning it out...

 

[raphael.atienza]

I think I got something similar to this. Php 1,300 so around $25.

It isnt full coverage (It cuts the screen and leaves the curve where it drops off exposed) and this first one I got had a flaw in the adhesive and has 3 permanent bubbles on the adhesive itself.

I had this replaced then on the second one was perfect. No bubbles. Although one speck of dust made it through. It isn't easy to install and requires a lot of patience and slow application to get the bubbles out.

Technique for the is to let it adhere on the top then slowly work it to the bottom. Starting with the center then working to the edges also works but takes more time. It may have also caused the permanent bubbles to the adhesive as the seller who sold me this forced to press the bubbles out instead of working it out to the edges.

Pictures of the box, kit, and on the Note 8 to follow in a bit.
With the effort for this and the non full coverage I might consider the Whitestone Dome because I am tired trying out different protectors.

I have tried TPU (issue is the s-pen leaves marks on the protector), various edge adhesive protectors (some fit well some don't but all have the dot matrix and eventually dust gets in and in my use case of using the phone while walking in the rain water gets in), and finally this full adhesive but NOT FULL COVERAGE ONE). So far this is the best I have tried BUT lint still gathers on the edges and is driving me bonkers with the cleaning it out...

Lint gathers on the side but at least the touch sensitivity is not affected. Also part of the screen is cut off and the edges are actually exposed.

Also it is weird that the manufacturer kept the black border even if this is full adhesive and again NOT FULL COVERAGE.

 

[pappschlumpf]

I think these are the same full adhesive protectors offered at AliExpress. Ordered one 3 weeks ago. Crap. Bubbles, cuts parts of display left, right, top, bottom. Inacceptable, full adhesive or not. Got it refunded and would not order it again.

Gesendet von meinem SM-N950FD mit Tapatalk

 

[Mr. Orange 645]

Lint gathers on the side but at least the touch sensitivity is not affected. Also part of the screen is cut off and the edges are actually exposed.

Also it is weird that the manufacturer kept the black border even if this is full adhesive and again NOT FULL COVERAGE.

If it doesn't cover the edges then that wouldn't work for me. I'm glad you like it, but for me, it's worthless if it doesn't cover the whole screen.

---------- Post added at 10:17 AM ---------- Previous post was at 10:16 AM ----------

Someone finally did it, a Tempered glass inexpensive full back adhesive for the Note 8, not just the edges. <SNIP>

https://www.amazon.com/gp/product/B077GSJ55T/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Please post pictures as proof.

 

[raphael.atienza]

If it doesn't cover the edges then that wouldn't work for me. I'm glad you like it, but for me, it's worthless if it doesn't cover the whole screen.

---------- Post added at 10:17 AM ---------- Previous post was at 10:16 AM ----------



Please post pictures as proof.

Uh I don't like it but it is good enough until I get a Whitestone Dome or other alternatives. I do not want to leave it bare and naked.

 

[Mr. Orange 645]

Uh I don't like it but it is good enough until I get a Whitestone Dome or other alternatives. I do not want to leave it bare and naked.

Gotcha. I'm using a wet apply screen protector for now. I like it other than the S-Pen leaves marks in it.

 

[raphael.atienza]

Gotcha. I'm using a wet apply screen protector for now. I like it other than the S-Pen leaves marks in it.

Is it TPU? Is the Spigen one good? or maybe the wraparound Ringke?

Also which S-Pen Tip are you using the grey or the black one?

 

[Mr. Orange 645]

Is it TPU? Is the Spigen one good? or maybe the wraparound Ringke?

Also which S-Pen Tip are you using the grey or the black one?

Iit's the Armor suit Wet apply one it's not TPU, but is a soft screen protector.

I'm using the black tip. the white one was too hard and really dug into the screen protector.

 

[ayinde6]

Photos pf singularity tempered glass

Disclaimer I am not a photographer so sorry if the pictures aren't great I had to use an iPad to take them...as you can see Mine is not catching any lint, like the dome glass, wet install ones, and TPU. Also, as you can see in the pictures my box is different than the one posted in the above post. Not sure which brand theirs is.

 

[borijess]

Disclaimer I am not a photographer so sorry if the pictures aren't great I had to use an iPad to take them...as you can see Mine is not catching any lint, like the dome glass, wet install ones, and TPU. Also, as you can see in the pictures my box is different than the one posted in the above post. Not sure which brand theirs is.

It's that full adhesive?

 

[Mr. Orange 645]

It's that full adhesive?

The first post explains it.

Disclaimer I am not a photographer so sorry if the pictures aren't great I had to use an iPad to take them...as you can see Mine is not catching any lint, like the dome glass, wet install ones, and TPU. Also, as you can see in the pictures my box is different than the one posted in the above post. Not sure which brand theirs is.

That looks great! Looks like I'll be ordering one soon.

 

[raphael.atienza]

Disclaimer I am not a photographer so sorry if the pictures aren't great I had to use an iPad to take them...as you can see Mine is not catching any lint, like the dome glass, wet install ones, and TPU. Also, as you can see in the pictures my box is different than the one posted in the above post. Not sure which brand theirs is.

Ooooh. Looks nice! Might order this...

 

[ayinde6]

Lint gathers on the side but at least the touch sensitivity is not affected. Also part of the screen is cut off and the edges are actually exposed.

Also it is weird that the manufacturer kept the black border even if this is full adhesive and again NOT FULL COVERAGE.

The one that I bought myself the box is different from yours and mine covers the screen fully, well more than this one.

 

[ayinde6]

It's that full adhesive?

Yes adhesive on the entire back of the screen

 

[ayinde6]

Tip, if you start screen protector from the top and work down using the squeegee provided then you can work out remaining bubbles with your fingers as long as you don't trap any dust under the screen should be bubble free

 

[Mr. Orange 645]

Tip, if you start screen protector from the top and work down using the squeegee provided then you can work out remaining bubbles with your fingers as long as you don't trap any dust under the screen should be bubble free

Did you use the plastic jig that came with it? Some of the TGSPs i've bought in the past for my S8+ came with a jig like that, but they always set the TGSP about a millimeter too low so it wound up cutting off part of the status bar. NEVER enough to matter, but was still annoying. How's the alignment with this one?

 

[ayinde6]

Did you use the plastic jig that came with it? Some of the TGSPs i've bought in the past for my S8+ came with a jig like that, but they always set the TGSP about a millimeter too low so it wound up cutting off part of the status bar. NEVER enough to matter, but was still annoying. How's the alignment with this one?

Yes I used to jig that came with it and IMO it is perfect it sits "right" below the selfie cam yeah I think I am set for screen protection for now may be I will re-review in a couple of weeks, see how it holds up.

 

[ayinde6]

Here are some more pics to show screen coverage. Again I am not a photographer lol I use the edge screen Sidebar a lot with no issues.