IMPORTANT thing is the driver. Did you restart to advanced startup option in Windows 10 to enable install unsignature driver? (Mode 7).
Finally... unbrick your Lumia device QHSUSB_DLOAD without JTAG
- Thread starter johntheredimid
- Start date
-
- Tags
- noad
Yes, I've restarted to Advance Startup Option & Installed the Unsigned Diver Successfully, but the same result shows
Can you show me the screenshot in the device manager when you plug the phone to the computer?
oh, I see you use Windows 11. Do you have any different Windows version like Windows 10? And I see the QHSUSB_BULK but in my opinion, have you try uninstall your driver and you install my driver, link in my post. You can try it and if it recognize Qualcomm HS-USB QLoader 9008 in my video that. You can try to use thor2 in cmd.
Okay, Bro. I'll try your method with Windows 7 or 10, & let you know what will happen
omg thanks to this thread I was able to revive my old 920 after I brick it XD ..
specially :
- Trogper - Jakub Blazej :
docs.google.com
-bruggesboy:
forum.xda-developers.com
an important note that kept me from easily flashing my phone out of the "QHSUSB_DLOAD" was the USB cable, make sure to use a good "usb cable ,not a generic one" the flashing always stopped around 1% using a generic usb cable , but after switching to a good cable "my original PS4 controller cable" the whole thing worked
specially :
- Trogper - Jakub Blazej :
Lumia x2x QHSUSB repair
Sorry I’ve disabled comments I was tired of all those accidental edits and spam this is for Nokia Emergency Connectivity (black screen, no vibration) Lumia x2x only. If you have other lumia, contact me here I’m not responsible for anything, do at your own risk DOWNLOADS Files lumiafirmware.com...
-bruggesboy:
Finally... unbrick your Lumia device QHSUSB_DLOAD without JTAG
04/30/2015 And THE WAIT IS OVER ... after almost two months without telephone, as this has happened to me in February, with the help of you... have achieved UNBRICK LUMIA DEVICES WITHOUT JTAG ONLY WITH USB. Thank you, thank infinitely. Warning...
forum.xda-developers.com
an important note that kept me from easily flashing my phone out of the "QHSUSB_DLOAD" was the USB cable, make sure to use a good "usb cable ,not a generic one" the flashing always stopped around 1% using a generic usb cable , but after switching to a good cable "my original PS4 controller cable" the whole thing worked
hello i have a Lumia 820 but boot is damaged because i changed a id of partition by mistake and is detected as HID.
please help me with my 820
please help me with my 820
Last edited:
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
6004/30/2015And THE WAIT IS OVER ... after almost two months without telephone, as this has happened to me in February, with the help of you... have achieved UNBRICK LUMIA DEVICES WITHOUT JTAG ONLY WITH USB. Thank you, thank infinitely.
Warning: use this tutorial at your own risk, I do not responsible of anything. To me it worked.
05/25/2015
Simple method:
Yesterday update to WPRT 2.10 was released, which is able to fix DLOAD scenarios for lumias.
Here is the link.
--------------------------------------
If this does not work, try the advanced method:
Let's to the steps:
Attachment files in the same thread.
1) Install Thor2 (incluiding on WPRT): http://go.microsoft.com/fwlink/?LinkID=525569
2) Download your firmware lumia with NaviFirm
3) Install Drivers
4) Go to the folder where it is thor 2 from cmd (run administrator)
cd C:...
Use this command line to extract gtp0.bin from ffu image
Code:thor2 -mode ffureader -ffufile "C:\rm-914\XXX.ffu" -dump_gpt -filedir C:\dump
this command will create gpt0.bin and rename it as msimage.mbn
mine was F771E62AF89994064F77CD3BC16829503BDF9A3D506D3FACECAEF3F808C868FD so my hex file in binary format was F771E62AF89994064F77CD3BC16829503BDF9A3D.bin
convert this binary file to hex using bin2hex.exe
or
Hex files already created starting in the bin, use RESPONSIBLY depending on your Lumia device
Now you have HEX.hex and msimage.mbn
the use this command line
Code:thor2 -mode emergency -hexfile HEX.hex -mbnfile msimage.mbn -orig_gpt
Ready, disconnect the battery and reconnect. Now connect your phone to the PC
Yeah, his phone started life with red screen!
Charge the battery
5) Flash rom: Now, in the case of Lumia 520/521
Code:thor2.exe -mode vpl -maxtransfersizekb 1 -vplfile C:\ProgramData\Nokia\Packages\Products\rm-915\XXX.vpl
.VPL remember it is not ffu. After the process 100%, your device turn with green screen, and:
:highfive:Code:thor2 -mode rnd -bootnormalmode
Some versions of Lumia, especially Lumia 820, 920, 920T, 925, 1020 (several models) have different .HEX, attached in the correct thread files ''CorrectedHexFiles.zip''
thanks @Heathcliff74
thanks @zapirkon and others users participated
thanks @ TheBITLINK aka BIT of Windows Insider.
Special thanks to Rathina Balan and AnnanZubair of Windows Insider Program
Thanks all... :fingers-crossed: they are the best11draft for steps
STEP 1 - find RootKeyHash and GPT.bin
locate your FFU file. If your phone bricked during Downgrade, you should have it in
c:\ProgramData\Microsoft\Packages\Products\rm-XXX...
or
c:\ProgramData\NOKIA\Packages\Products\rm-XXX...
It should be best if you have the Windows Phone Recovery Tool updated to 1.2.4
then go to the Microsoft / Windows Phone recovery folder (thor2.exe is there)
c:\Program Files (x86)\Microsoft Care Suite\Windows Phone Recovery Tool\
open up command line there, and make the dump in folder of your choice
Code:thor2 -mode ffureader -dump_partitions -ffufile "RM9xx*.ffu" -filedir "c:\dump"
the log will display also the hash needed for you to find correct HEX file
Code:Number of partitions found 28 RKH of SBL1: F771E62AF89994064F77CD3BC16829503BDF9A3D506D3FACECAEF3F808C868FD RKH of UEFI: F771E62AF89994064F77CD3BC16829503BDF9A3D506D3FACECAEF3F808C868FD
also, the files are large, becaue the above step will make complete dump
you only need GPT.bin which is around 250 KB so get this file only
STEP 2. find the HEX file in the archive attached here
it is named with name starting as the RKH from previous step.
it is the first 40 bytes, so in the example
F771E62AF89994064F77CD3BC16829503BDF9A3D506D3FACECAEF3F808C868FD
is infact
F771E62AF89994064F77CD3BC16829503BDF9A3D.hex
STEP 3. try to get RED screen
Code:thor2 -mode emergency -hexfile bin.hex -mbnfile gpt.bin -orig_gpt
the process above will not finish with success, as the provided GPT file is not only file needed to flash it. so I tried to flash it several times, reseting the phone ... etc., after 3-4 times, the phone vibrated, with red screen
STEP 4. flash your phone FFU image
Code:thor2 -mode vpl -maxtransfersizekb 1 -vplfile "C:\ProgramData\Microsoft\Packages\Products\RM .... \* .vpl"
don't forget the -maxtransfersizekb flag because this flag perhaps was omitted in the Microsoft tool, making the flash procedure stop in the middle5Woohoo!!!! Success with my RM-893! Skiddd thanks for the bin package! Not sure where you got the RM-892 bin but I've tried several before yours and they didn't work but yours did!
I converted to hex then had to do the edits since that one is larger than 60kb and now my phone is back to life! I've posted the edited file here for anyone with an RM-892/3 that wants to try it!3
Not at all. By far. Sorry.
---------- Post added at 12:56 PM ---------- Previous post was at 12:53 PM ----------
{I quoted the whole thing above on purpose}
Followed the steos "to the T" as they say. Worked just fine. You just forgot to mention that at the point of the Green Nokia Screen you can reset/remove batt/issue reset command to restart.
Thank you Zapirkon for summarizing and thanks the OP as well for the finding.
