Find device device closed unexpectedly

[KICK-BOXING]

Hi



i have Mi Note 3 "Jason"
this phone after update can not load android and say "Find device device closed unexpectedly"
i try to flash rom, but see error
tested file:
jason_global_images_V10.4.2.0.PCHMIXM_20190906.0000.00_9.0_global_8c73072230
jason_images_V10.4.2.0.PCHCNXM_20190906.0000.00_9.0_cn_4f22b038c1

​

 

[zaqm]

Bootloader unlocked?

 

[KICK-BOXING]

Bootloader unlocked?

no, bootloader is lock!

 

[zaqm]

no, bootloader is lock!

Search Youtube for videos about how to testpoint it in EDL mode

 

[KICK-BOXING]

Search Youtube for videos about how to testpoint it in EDL mode

I tried in edl mode
I encounter these errors in edl

 

[zaqm]

I tried in edl mode
I encounter these errors in edl

After you extract the fastboot image place it in a single folder named for example "Rom" and put this folder to desktop. Then try to flash it again.

 

[KICK-BOXING]

After you extract the fastboot image place it in a single folder named for example "Rom" and put this folder to desktop. Then try to flash it again.

not worked...

 

[zaqm]

not worked...

Try with another pc if you can. Did you also try to disconnect battery connector before flashing?

 

[ranrt]

Have the same issue on my Mi note 3

I have the same issue
My wife just approved the update , then after update download and complete the phone asked for reboot , the phone always boot to mi recovery.
I did Wipe all data but the same, i am so upset. any way i hope for a fix

 

[ranrt]

FIX the boot loop issue.

Well just to inform you that finally i have fixed my device,
Method can be found on youtube, warm and open the back cover , remove the flat of battery , short two test point while then connecting the USB-C cable , the PC finds qualcomm 9008 in device manager,
Then you release the short you made of the two test points , flash the rom via Mi Flash , when finished connect back the flat of the battery. power on and you done saving your phone.
This is the method , search : "Flash Xiaomi Mi Note 3 with locked boot, use TestPoint" in the youtube.

HTH,

Ran