Fire Tv Stick remote suddenly stopped working

[KLit75]

Like it says up top, but it's relatively new. Of course I tried new batteries. I had been using the originals from when I bought it in late March. All I was doing was syncing mysql to the stick and I needed a mouse to move some stuff around in ES file explorer (got side tracked actually and installed task manager to clear the cache) so I installed WuKong remote. It was then I noticed some serious lag--takes about 10 seconds or less on fire tv console to clear cache. This took about a minute at least then it just froze in the app, couldn't press home. Tried 3 sets of new batteries but nothing worked.
BTW--this new faster screen timeout on aftv is all the more annoying when you're trying to do something like update a library because if I leave for a couple of minutes I need to reboot since neither Yatse nor wukong were able to wake up the display BUT you can still hear the clicks.
I don't mean to go on but something tells me this is more than just a remote control issue. I thought if anyone had a similar experience they might be of some help. Thanks.

 

[Calibaan]

Did you try to pair the remote again? Press the home button for 5-10 seconds after powerup.

 

[KLit75]

Did you try to pair the remote again? Press the home button for 5-10 seconds after powerup.

Yes. A few times with different batteries, but it just won't pair. I might try a factory reset. If I had to pin point it it would've died when i first started using wukong app. I've used that on other devices with no issues but that's the only thing i did differently last night. I'll probably do a factory reset and if that don't work call amazon.

 

[Calibaan]

You could try the Android phone remote app for calling the pairing function from menu. Probably this does the trick.

 

[KLit75]

You could try the Android phone remote app for calling the pairing function from menu. Probably this does the trick.

And had I caught your post a bit earlier...I may have lol.

I still have no idea the root cause but a factory reset did the trick. The remote responded immediately (actually a lot faster then when i wipe my rooted atvs.) I wonder if the wukong remote somehow highjacked it?) Just remember the reason i installed it was to be able to mouse click "show hidden" on ES file explorer. The stupid part is I now know there's another way to accomplish this without a mouse by going into the app's settings. No big deal. Thanks for the help!

 

[dbdoshi]

This has happened to me thrice in one week. This on a rooted FTV, not stick. Three times, the remote just died. Changed batteries, but no joy. The first time, a simple reboot fixed it. The second time, I had to use the FTV app on my iPhone to un-pair and re-pair it. The third time, the reboot did the trick. Not sure what happened. Since then (around a month back), no issues. No change in firmware/apps/any sort of configuration on FTV (or any new devices in the house) before the problem or after the problem. The problem came for a week and then simply went away.

I don't have the Wukong app installed. I have one another FTV in my bedroom and made sure that the problem remote did not somehow got paired to it, and it wasn't. I need to read up on BT interference, that seems to be my wild and ignorant guess. Or some hardware within the remote is going bad... But, I am not sure about that reason, the remote is used everyday and works fine since the mishap.

 

[nyder]

Today while watching a video via my AFTV, the whole thing just locked up on me. Had to remove the power cord to reboot it. After it rebooted I noticed that my controller wasn't doing anything, and the same with my amazon game controller. But my logitech K400 worked. So I go to settings because I know for a fact the batteries aren't bad. Put in some new one on the remote first thing and you can see the led light up on the controller. Anyways, in Settings it said my controllers were paired, but said Battery, like the batterys were dead. So I used my keyboard to unpair my gamepad. Then I had no problem pairing it up and controlling stuff, so I did the same with my remote and boom, now it works.

tl;dr Check settings, if it says just Battery on the controller, unpair it, and then pair it again.

 

[tash2010]

Can some one help my fire stick controller it's working correctly it goes up & down but it won't go on the mouse bit to click on the show box films I want to watch I'm new to all this technology stuff lol

 

[MyMars]

fire sitck dead

I had my firestick for a week and used it, maybe four times. Went to use it again and it would not come on, no LED light, nothing. I changed the batteries, several sets of new ones. Nothing. I am not a tech guru, so if you have some ideas for me, dumb them down.
Oh, and I tried the new batteries in another remote and they work fine.

 

[urbanman2004]

Had the same problem too... I had to hold down the Home button while being 4inches away from the receiver before it synced

 

[nachumama]

i've had no luck with my firestick remote, i connected the firestick to my tv but the firestick remote won't sync with the firestick so now i'm stuck at the first screen, i've tried changing the batteries for new ones, cleaning the remote's battery contacts, plugging and unplugging the firestick from the tv and the electrical outlet. I've also plugged the firestick to a brand new tv and still can't find the remote. I've remove the batteries for 2 hours and tried again to sync it to the firestick and no luck. rebooted my router several times, put the remote next to the firestick to see it would sync and still no luck, changed hdmi ports and nothing, went to a friend's house and not working there either. called amazon to be sent a replacement firestick and remote, they sent both and still the same problem. I would like to factory reset the firestick but i don't know how since i can't use the phone app or the remote. I'm at the very first screen where it asks you to press the home button so it can find the remote. btw, i've also did the hold 3 button remote reset and didnt work either. i have the firestick with voice first generation, i had kodi installed so i don't know if that means it was rooted or not.... Any suggestions on what else i can do to pair it would be greatly appreciated.

TL;DR firestick with voice remote won't sync no matter what and need help with syncing.

 

[TommyCallahan]

If you are still having this trouble it is because your firestick does not recognize that the tv is on. It's doing that because it is plugged into the wall. If you unplug the USB part of the plug from the wall and plug it into your USB slot on your tv it will solve the problem. Switched mine over and it hasn't happened since.

 

[the_uker]

If you are still having this trouble it is because your firestick does not recognize that the tv is on. It's doing that because it is plugged into the wall. If you unplug the USB part of the plug from the wall and plug it into your USB slot on your tv it will solve the problem. Switched mine over and it hasn't happened since.

That makes absolutely no sense at all.

@nachumama So you have a new FireTV Stick and a new remote and it still doesn't work? Two separate sets of stick+remote and none of them works on your TV or the one at your friend's house? That's not good.

 

[workinaround]

FireStick remote not working properly

My Firesticktv remote was working very slowly. I would hit a button on the remote and nothing would happen for about 30 seconds. I changed the batteries(no change). I fixed it by going to Settings- Network- whatever network it says you are connected to. hit the Forget this network, Then connect to the next network on your router. It was my 2.4GHz channel. For some reason my channel was changed and was on my 5GHz channel, It didn't work on the 5GHz channel. The remote works like new again

 

[mdbigham]

my firestick is not working tried very thing that other people has tried what to do next

 

[MagicInTechs]

Fire Tv Stick remote suddenly stopped working issue or Amazon Fire Stick not working issue usualy occured due to Inadequate Power Supply, Damage Fire Stick’s remote batteries, Outdated Software, Corrupted Fire Stick Cache, and Overheating of Fire Stick devices.
However, there is some workaround solutions available on the web 'https://techsmagic.com/how-to-fix-amazon-fire-stick-not-working-after-update-reset' page detailing it. Here is the solution:
Method 1: Restart your Fire Stick
Method 2: Check your Internet Connection
Method 3: Update FireStick Software
Method 4: Clear the Fire Stick Cache
Method 5: Reset your Fire Stick to Factory Settings

If you have some other and better solutions to fix this issue, must share with me. Thanks

 

[Photo Guy]

Found this out on A Samsung series 6-2017 -Go to settings-in Menu- Go to General-External Device Manager-and Disable Anynet+ (HDMI-CEC) -this took the Glitch out of the Firestick and made it more stable.