• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[Firmware] 7.19.401.2 HTC One M7 • No Red Warning • No Wipe

Search This thread

matanlevanon

Senior Member
May 26, 2010
1,211
895
Tel Aviv
Modified Firmware Without The Red Developer's Warning
Please make sure you understand EVERY STEP before trying to flash a new firmware. I AM NOT RESPONSIBLE FOR ANYTHING GOING WRONG OR ACCIDENTAL BRICKS!

This firmware is WITHOUT the development warning overlay:

This build is for
development purposes only
Do not distribute outside of HTC
without HTC's written permission.
Failure to comply may
lead to legal action.​

This is the custom version firmware with modified HBOOT to remove the red warning.

*** This will NOT wipe your SD partition ***

But please make a back up before flashing for safety.

Requirements for flashing: S-OFF
If you do not know how to flash a Firmware or it is your first time, follow Vomer's Guide for detailed instructions.
If you do know what you are doing, here is a reminder of the commands:
Code:
adb reboot bootloader
fastboot oem rebootRUU 
fastboot flash zip C:\adb\Firmware_File_Name.zip
fastboot flash zip C:\adb\Firmware_File_Name.zip (repeat)
fastboot reboot

DOWNLOAD LINKS: (Show appreciation and hit the THANKS below)
Latest:
fw_7.19.401.2-NoRed_NoWipe

Older Versions:
fw_7.15.401.1_NoWipe_NoRed
fw_6.09.401.12-NoWipe_NoRed
fw_6.09.401.11_custom_nored
fw_6.09.401.10_custom_nored

HTC M9 Firmware without Red Warning

* I am not adding any new FW for M7. If there is a new release and you can provide the custom-FW I can modify the red warning out for you per request and post it here.
fw_7.19.401.51 can be found here

Credits:
@vomer for his amazing guide.
 
Last edited:

polys643

Senior Member
May 26, 2013
234
44
Nicosia
I'm getting the following:

C:\HTC One Toolkit - Squabbi - 3.1.2>fastboot flash zip fw_6.09.401.11_custom_nored.zip
target reported max download size of 1526722560 bytes
sending 'zip' (29585 KB)...
OKAY [ 2.500s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 3.014s

I'm running ARHD 83.1. This is what I have:

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.161.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3861mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ea0bccbd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

Do I need to change my CID? If yes, to what?
 

depeche101

Member
Apr 10, 2007
41
1
I also got FAILED (remote: 99 unknown fail)
but it stil shows FW 6.09.401.11 CL366813...so I guess it didn't fail...

dep
 

cahibo

Member
Aug 14, 2013
32
6
Thank you for grabbing this.

I've tried a couple of times and it fails at:
C:\adb>fastboot flash zip c:\adb\firmware.zip
target reported max download size of 1514139648 bytes
sending 'zip' (29585 KB)...
OKAY [ 2.449s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 2.870s

My details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 1.13.41.0702
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wlv
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0731000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3930mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.265s


Any ideas?

**Edit**
I checked on my phone and the firmware is still 5.28.605.2
I don't know why it's blank above?
 

niravnn

Senior Member
Aug 12, 2011
927
273
Bardoli
after fastboot reboot i get stuck at oem rebootRUU screen.
I mean the sliver htc logo screen now what I have to do
plz help
MY device is s-off and supercid
 

kreatik

Member
Jun 19, 2009
10
2
Hi, a new version is available:

(‏@LlabTooFeR) HTC One M7 receives maintenance update. ROM Version is 6.09.401.12 (193.94mb). Main changes related to NFC module. Where can download this new fw?
 
  • Like
Reactions: matanlevanon

c0de_junkie

Senior Member
Dec 27, 2008
1,231
986
Windsor Ontario
Hi, a new version is available:

(‏@LlabTooFeR) HTC One M7 receives maintenance update. ROM Version is 6.09.401.12 (193.94mb). Main changes related to NFC module. Where can download this new fw?

You can find it here http://forum.xda-developers.com/showthread.php?t=2316726 , there is a NO WIPE version but the person who provides the firmwares does not remove the red text nor does he do a Dark version..... Myself, I am going to wait for a Dark version that has the red text removed...
 

sisyphe200

Senior Member
Mar 16, 2010
229
209
C:\sdk>fastboot flash zip fw_6.09.401.12-NoWipe_NoRed.zip
..................................................................................
C:\sdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA387W.......
(bootloader) imei: ..............
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4306mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s

C:\sdk>fastboot reboot
rebooting...

finished. total time: 0.031s

tks
 

gecata

Senior Member
Oct 30, 2006
107
61
Lom
Confirm -Working fine

C:\>fastboot flash zip C:\fw_6.09.401.12-NoWipe
_NoRed.zip
target reported max download size of 1514139648 bytes
sending 'zip' (29302 KB)...
OKAY [ 2.347s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 3.958s

C:\>fastboot flash zip C:\fw_6.09.401.12-NoWipe
_NoRed.zip
< waiting for device >
target reported max download size of 1514139648 bytes
sending 'zip' (29302 KB)...
OKAY [ 2.360s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[adsp] unzipping & flushing...
(bootloader) [RUU]UZ,adsp,0
(bootloader) [RUU]UZ,adsp,15
(bootloader) [RUU]UZ,adsp,27
(bootloader) [RUU]UZ,adsp,37
(bootloader) [RUU]UZ,adsp,49
(bootloader) [RUU]UZ,adsp,60
(bootloader) [RUU]UZ,adsp,72
(bootloader) [RUU]UZ,adsp,82
(bootloader) [RUU]UZ,adsp,94
(bootloader) [RUU]UZ,adsp,100
(bootloader) [RUU]WP,adsp,0
(bootloader) [RUU]WP,adsp,100
(bootloader) ...... Successful
(bootloader) start image[cir] unzipping & flushing...
(bootloader) [RUU]UZ,cir,0
(bootloader) [RUU]UZ,cir,100
(bootloader) ...... Successful
(bootloader) start image[pg2fs_spcustom] unzipping & flushing...
(bootloader) [RUU]UZ,pg2fs_spcustom,0
(bootloader) [RUU]UZ,pg2fs_spcustom,22
(bootloader) [RUU]UZ,pg2fs_spcustom,48
(bootloader) [RUU]UZ,pg2fs_spcustom,70
(bootloader) [RUU]UZ,pg2fs_spcustom,97
(bootloader) [RUU]UZ,pg2fs_spcustom,100
(bootloader) ...... Successful
(bootloader) start image[rpm] unzipping & flushing...
(bootloader) [RUU]UZ,rpm,0
(bootloader) [RUU]UZ,rpm,100
(bootloader) [RUU]WP,rpm,0
(bootloader) [RUU]WP,rpm,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-1] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-1,0
(bootloader) [RUU]UZ,sbl1-1,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-3,0
(bootloader) [RUU]UZ,sbl1-3,100
(bootloader) signature checking...
(bootloader) [RUU]WP,sbl1-3,0
(bootloader) [RUU]WP,sbl1-3,100
(bootloader) ...... Successful
(bootloader) start image[sbl2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl2,0
(bootloader) [RUU]UZ,sbl2,100
(bootloader) [RUU]WP,sbl2,0
(bootloader) [RUU]WP,sbl2,100
(bootloader) ...... Successful
(bootloader) start image[sbl3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl3,0
(bootloader) [RUU]UZ,sbl3,100
(bootloader) [RUU]WP,sbl3,0
(bootloader) [RUU]WP,sbl3,100
(bootloader) ...... Successful
(bootloader) start image[tp] unzipping & flushing...
(bootloader) [RUU]UZ,tp,0
(bootloader) [RUU]UZ,tp,100
(bootloader) ..... Bypassed
(bootloader) start image[tp] unzipping & flushing...
(bootloader) [RUU]UZ,tp,0
(bootloader) [RUU]UZ,tp,100
(bootloader) ...... Successful
(bootloader) start image[tz] unzipping & flushing...
(bootloader) [RUU]UZ,tz,0
(bootloader) [RUU]UZ,tz,100
(bootloader) [RUU]WP,tz,0
(bootloader) [RUU]WP,tz,100
(bootloader) ...... Successful
(bootloader) start image[radio] unzipping & flushing...
(bootloader) [RUU]UZ,radio,0
(bootloader) [RUU]UZ,radio,5
(bootloader) [RUU]UZ,radio,11
(bootloader) [RUU]UZ,radio,17
(bootloader) [RUU]UZ,radio,23
(bootloader) [RUU]UZ,radio,29
(bootloader) [RUU]UZ,radio,34
(bootloader) [RUU]UZ,radio,40
(bootloader) [RUU]UZ,radio,46
(bootloader) [RUU]UZ,radio,52
(bootloader) [RUU]UZ,radio,58
(bootloader) [RUU]UZ,radio,63
(bootloader) [RUU]UZ,radio,69
(bootloader) [RUU]UZ,radio,75
(bootloader) [RUU]UZ,radio,80
(bootloader) [RUU]UZ,radio,86
(bootloader) [RUU]UZ,radio,92
(bootloader) [RUU]UZ,radio,98
(bootloader) [RUU]UZ,radio,100
(bootloader) [RUU]WP,radio,0
(bootloader) [RUU]WP,radio,23
(bootloader) [RUU]WP,radio,46
(bootloader) [RUU]WP,radio,69
(bootloader) [RUU]WP,radio,92
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
(bootloader) start image[rcdata] unzipping & flushing...
(bootloader) [RUU]UZ,rcdata,0
(bootloader) [RUU]WP,rcdata,0
(bootloader) ...... Successful
OKAY [ 54.556s]
finished. total time: 56.916s

C:\Users\Gecata>fastboot reboot
rebooting...

finished. total time: 0.047s
 
  • Like
Reactions: dumpy83

gecata

Senior Member
Oct 30, 2006
107
61
Lom
I've just updated. Everything went fine.

The main change between de .11 and .12 is radio's? Or is it just NFC?

Radio not changed - see attached screenshots.
NFC - may be, I'm not sure!
 

Attachments

  • Screenshot_2014-12-31-01-36-35.png
    Screenshot_2014-12-31-01-36-35.png
    107.1 KB · Views: 1,547
  • Screenshot_2014-12-31-01-43-02.png
    Screenshot_2014-12-31-01-43-02.png
    105.1 KB · Views: 1,534
  • Like
Reactions: diamond_cbr

3DDude

Member
Oct 19, 2011
39
1
bodegraven
Is that not because of your rom and the version itself?
See on both screens you have 6.09.401.5 as build number ;)

Or will the new radio versions be detected in android - when you flash the firmware?
Or is that just the radio thats in your rom? ;)
 

alhuang69

Senior Member
May 28, 2008
1,194
84
Hong Kong
Working very well. Thanks a lot

---------- Post added at 02:23 PM ---------- Previous post was at 01:56 PM ----------

Radio not changed - see attached screenshots.
NFC - may be, I'm not sure!
Yes, the Radio has not been changed since 6.09.401.5
If something is working well, there is no reason to change....
 

Top Liked Posts