General Firmware and Combination Firmware and FOTA Delta and CSC change and...

Search This thread

adfree

Senior Member
Jun 14, 2008
9,857
5,835
Samsung Galaxy Watch 4
@Sorinbalcon

Mercy.

I am NOT willing to waste my time...

AGAIN.

Rename 2 files... then unpack


This is NO Rocket Science...

I have NO idea where exact you fail...

I have no Crystal Ball.

And I have also other things to do...

I will NOT reupload...

LinkS are still valid.

Best Regards
 

Sorinbalcon

Member
Jan 3, 2022
9
2
@Sorinbalcon

Mercy.

I am NOT willing to waste my time...

AGAIN.

Rename 2 files... then unpack


This is NO Rocket Science...

I have NO idea where exact you fail...

I have no Crystal Ball.

And I have also other things to do...

I will NOT reupload...

LinkS are still valid.

Best Regards

Thank you very much for your help. I succeeded. I made a mistake when unzipping. you guys are great. thank you for your patience
 
  • Like
Reactions: adfree

adfree

Senior Member
Jun 14, 2008
9,857
5,835
Samsung Galaxy Watch 4
For study...

Combination Firmware FU ehm FACtory for SM-R870

Code:
COMBINATION_FAC_FBR0_R870XXU1AVE2_FACFAC_CL24349936_QB52279853_REV00_user_mid_noship_MULTI_CERT.tar.md5

A

We can not use fully... as Security crap... to prevent FAC Firmware...

B

Seems no Root...

C

I was able to use boot.img and recovery.img and few APKs with help of Magisk and Root...

Only as info.

Best Regards

Edit 1.

Here info about eToken and why we can't fully flash this FAC...
 
  • Like
Reactions: tids2k

ZlaWox

New member
Jan 10, 2022
2
0
Hey guys I just got this new Watch 4 and it's model SM-R870NZKAXAA, and I would like to use Samsung Pay but the Russian version since I got russian banks, and I was wondering if there is a way to make it work, thx for help
NB: it's the Bluetooth version so I can't run the LTE version command in dial
20220824_002935.jpg
 

TheIntruder

Senior Member
Jun 8, 2010
2,788
703
West Yorkshire
Samsung Galaxy Watch 4
Hey guys I just got this new Watch 4 and it's model SM-R870NZKAXAA, and I would like to use Samsung Pay but the Russian version since I got russian banks, and I was wondering if there is a way to make it work, thx for help
NB: it's the Bluetooth version so I can't run the LTE version command in dial
View attachment 5694551
Look here...
 

adfree

Senior Member
Jun 14, 2008
9,857
5,835
Samsung Galaxy Watch 4
CSC change related... not tested nor I understand fully how it work...

Will later do some test(s)...

Best Regards
 

adfree

Senior Member
Jun 14, 2008
9,857
5,835
Samsung Galaxy Watch 4
Code:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 117 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> dtbo.img
<ID:0/004> keystorage.bin
<ID:0/004> ldfw.img
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> tzar.img
<ID:0/004> tzsw.img
<ID:0/004> uh.bin
<ID:0/004> up_param.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port ....  0
<ID:0/004> Removed!!
<OSM> All threads completed. (succeed 1 / failed 0)

Tiny Adventure...
:cowboy:

Tried to update my EVA8 SM-R870 with few files from FOTA DELTA... FVD4...

Result hang on Screen with "not running Official blabla"...


Then I realized stupid me not charged Battery... only 15 % left...

I was able to quick take files from EVA8... and Watch alive again...
Now charging for more stupid tests...

Code:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 123 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> dtbo.img
<ID:0/004> keystorage.bin
<ID:0/004> ldfw.img
<ID:0/004> metadata.img
<ID:0/004> misc.bin
<ID:0/004> omr.img
<ID:0/004> optics.img
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> tzar.img
<ID:0/004> tzsw.img
<ID:0/004> uh.bin
<ID:0/004> up_param.bin
<ID:0/004> userdata.img
<ID:0/004> vbmeta.img
<ID:0/004> vbmeta_system.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port ....  0
<ID:0/004> Removed!!
<OSM> All threads completed. (succeed 1 / failed 0)

SOSdesasterRepair TAR only without prism.img and super.img.
So - 2 files... the 2 biggest files...

USB cable connected... so ODIN action...

Best Regards

Edit 1.

Seems I have something like this:

Maybe I can find what no PDP sceanrio means...
Or by Enemenmuh I can find why...
 
Last edited:

adfree

Senior Member
Jun 14, 2008
9,857
5,835
Samsung Galaxy Watch 4
About eToken... Combination Firmware...
Look at Photo:

Seems it is possible to erase something... maybe steady.bin dead by some action...
Result is "Allow FAC"

Photo from SM-R875F...
User told no luck with SM-R875U Firmware... as Modem not work...
I think he mean eSIM...

He not test Combination Firmware... but I am sure it could work...
No idea if netOdin is enough or only via USB cable...


About CSC change...
Tried few "free" Tools...

Seems Modem COM Port required...
Not sure I am tooooo lazy to test my Phones...

Example:
SamFw_FRP_Tool_v3.1.zip

This I was able to start without Virus Warning...


The other Tool from here:

Antivir remove DLL...

But main problem for me... seems 64 bit Tool...

And my Test Notebook only 32 bit... Windows 7...

So not start...
I am tooooo lazy to check with other PC...

Best Regards

Edit 1.

Oh, Developer answered...
No its all done through modem, it doesn't do CSC change over ADB at all.

Not direct to my Question... but this is exact what other Tool suggest...

You need MTP or crap to see Modem Driver...
No idea if it is possible on GW4 and/or GW5...

I have heavy problems to enable ADB over USB cable...
So IMHO this will be not easier...

Best Regards
 
Last edited:

adfree

Senior Member
Jun 14, 2008
9,857
5,835
Samsung Galaxy Watch 4
Before I waste my time with 4 GB super.img...

I will waste some time with smaller prism.img...

A
from EVA8 not extractable with 7Zip so additional steps required like imjtool IMHO...

B

I am unsure if I can use netOdin or Odin or dd...

C

I am toooo stupid to show proper my findings... I am using TAB in Editor...
Code:
Filename/inside Firmware    Partition    inside FOTA/Delta as Full File        inside FOTA/Delta as "Patch"
boot.img            p18        ------------->                boot.img.p
cache.img            p33        NO not as FILE
dtbo.img            p20        yes
PIT partition...                NO not as PIT file
keystorage.bin            p11        yes
ldfw.img            p7        yes
metadata.img            p27        NO not as FILE
misc.bin            p14        NO not as FILE
omr.img                p34        NO not as FILE
optics.img            p32        ------------->                optics.patch.dat
prism.img            p31        ------------->                prism.patch.dat
recovery.img            p19        ------------->                recovery-from-boot.p inside "system"
sboot.bin                    yes
super.img            p30        ------------->                odm.patch.dat + product.patch.dat + system.patch.dat + vendor.patch.dat
tzar.img            p9        yes
tzsw.img            p8        yes
uh.bin                p15        yes
up_param.bin            p13        yes
userdata.img            p36        NO not as FILE
vbmeta.img            p23        yes
vbmeta_system.img        p24        yes

Maybe somebody have better idea...

D

dump via netcat su x x too
Damn SM-R870 stopps for cooling...

Stops on different sizes... 2400 3200 and biggest was 5000 MB +

In main... GW4 su xxx

Best Regards
 

adfree

Senior Member
Jun 14, 2008
9,857
5,835
Samsung Galaxy Watch 4
Okidoki...

Seems I have to go the dd way...

After so much trouble with netcat direct to PC... I am going the good old way...

Okay still tooo hot bigger 3000 MB...
Code:
freshbl:/sdcard # dd if=/dev/block/mmcblk0p30 of=/sdcard/dumpSUPER.bin
10485760+0 records in
10485760+0 records out
5368709120 bytes (5.0 G) copied, 222.376750 s, 23 M/s
freshbl:/sdcard # exit
freshbl:/ $ exit

D:\Android\ADB>adb pull /sdcard/dumpSUPER.bin
[ 37%] /sdcard/dumpSUPER.bin

But for prism.img perfect way...

Code:
D:\Android\ADB>adb shell
freshbl:/ $ su
freshbl:/ # dd if=/dev/block/mmcblk0p31 of=/sdcard/dumpPRISM.bin
1228800+0 records in
1228800+0 records out
629145600 bytes (600 M) copied, 34.618687 s, 17 M/s
freshbl:/ # exit
freshbl:/ $ exit

D:\Android\ADB>adb pull /sdcard/dumpPRISM.bin
/sdcard/dumpPRISM.bin: 1 file pulled. 2.5 MB/s (629145600 bytes in 237.542s)

Btw. only this dumped p31 dump was able to be patched...
imjtool have some additional Bytes... and fail...

But IMHO I have now prism.img from FVD4...
Soon I will write p31 via dd and look if my SM-R870 EVA8 will explode or accept this FVD4 file(s)...

Best Regards

Edit 1.

Oh... tiny correction... seems generated AVB valid file... so will try to flash via Odin...

Edit 2.

Ohoh.. wrong idea...
Odin hangs and not finish after many minutes...
Seems not possible to reach recovery... automatic into "Kies Mode"...

I was able to flash Original EVA8 prism... so SM-R870 still alive for more stupid ideas...

Edit 3.
Added Pic from up_param... this is how it looks + some cryptic Battery info
 

Attachments

  • download_error.jpg
    download_error.jpg
    16.8 KB · Views: 28
Last edited:
  • Like
Reactions: TheIntruder

adfree

Senior Member
Jun 14, 2008
9,857
5,835
Samsung Galaxy Watch 4
I am tiny step closer to FVD4...

Code:
D:\Android\ADB>adb push prismX.img /sdcard
prismX.img: 1 file pushed. 1.1 MB/s (629145600 bytes in 533.692s)

D:\Android\ADB>adb shell
freshbl:/ $ su
freshbl:/ # cd /sdcard
freshbl:/sdcard # dd if=/sdcard/prismX.img of=/dev/block/mmcblk0p31
1228800+0 records in
1228800+0 records out
629145600 bytes (600 M) copied, 68.742835 s, 8.7 M/s
freshbl:/sdcard # reboot

Rebooted proper and showed FVD4 under CSC... after:
Code:
*#1234#

In Standalone Mode...

Now trying to Factory Reset and look if pairing with Phone possible or...

Best Regards

Edit 1.

Nice.

This seems to work.
Positive Sideeffect. No f%$ing FOTA update...

I am only scared... because prism.img was unmodified "Original"...

And for super.img I have many things to prepare... and maybe Security bypass mandatory...
Autch...
 
Last edited:
  • Like
Reactions: TheIntruder

adfree

Senior Member
Jun 14, 2008
9,857
5,835
Samsung Galaxy Watch 4
Oh.

Samsung not able to add devices to RTL... but they release GW5 Kernel Source...
Code:
SM-R905U_NA_Opensource.zip
SM-R915U_NA_Opensource_R915USQU1AVG6_diff.zip
SM-R925U_NA_Opensource_R925USQU1AVG6_diff.zip

No idea if also GW4 config blabla to build inside...

Only as info...

Best Regards
 

iBowToAndroid

Senior Member
Nov 9, 2010
5,301
1
1,685
Twin Cities MN
Code:
R870XXU1AUGE/R870OXM1AUGE

R870XXU1BUH9/R870OXM1BUH9

R870XXU1BUI5/R870OXM1BUI5

R870XXU1CUIE/R870OXM1CUIE

R870XXU1CUJ2/R870OXM1CUJ2

R870XXU1DUJA/R870OXM1DUJA

R870XXU1DUK1/R870OXM1DUK1

R870XXU1DULB/R870OXM1DULB

R870XXU1EVA8/R870OXM1EVA8

R870XXU1EVB4/R870OXM1EVB4

R870XXU1FVC8/R870OXM1FVC8


Please.

Maybe somebody has older leaked Firmware for SM-R870.


I have only EVA8 and my f$%ing FOTA...


Need files for study.


Thanx in advance.

Best Regards
I can get access to 1DUK1
Could you share the stock firmware of SM-R925F (GW5 Pro International variant)?
No, I don't have access to F model firmware
 

gr_nik81

Member
Feb 4, 2021
13
0
Samsung Galaxy Note 20 Ultra
i have Samsung Galaxy Watch 4 LTE (SM-R875F) CSC (ITALY) i live in Greece. I used E-SIM greek carrier [Cosmote] but incoming calls and outgoing no works. Internet data and sms works fine. is this problem carrier support or samsung firmware?

I have latest firmware:
 

adfree

Senior Member
Jun 14, 2008
9,857
5,835
Samsung Galaxy Watch 4
Since Tizen...

I have never any Watch nor Phone with eSIM.

So I have 0 own knowledge about eSIM.

All I "know" is eSIM is more joke... as easy to handle.

I love my old SIM cards. I can hold them with my big fat fingers.
I can cut them if they are tooo big after 20 years...

eSIM sounds more pia... with all this Security Region Lock crap...

Sorry, my private opinion.


Best Regards
 
  • Like
Reactions: gr_nik81

ZlaWox

New member
Jan 10, 2022
2
0
Hey guys, pls is there any way I can change my SM-870 CSC to SER, mine is R870XXU1FVD4 and XAA
 

adfree

Senior Member
Jun 14, 2008
9,857
5,835
Samsung Galaxy Watch 4
Code:
freshbs:/ $ cat /proc/partitions
major minor  #blocks  name

   1        0       8192 ram0
   1        1       8192 ram1
   1        2       8192 ram2
   1        3       8192 ram3
   1        4       8192 ram4
   1        5       8192 ram5
   1        6       8192 ram6
   1        7       8192 ram7
   1        8       8192 ram8
   1        9       8192 ram9
   1       10       8192 ram10
   1       11       8192 ram11
   1       12       8192 ram12
   1       13       8192 ram13
   1       14       8192 ram14
   1       15       8192 ram15
 254        0     992464 zram0
 179        0   15267840 mmcblk0
 179        1       8192 mmcblk0p1
 179        2       8192 mmcblk0p2
 179        3       4096 mmcblk0p3
 179        4       8192 mmcblk0p4
 179        5       8192 mmcblk0p5
 179        6      98304 mmcblk0p6
 179        7       8192 mmcblk0p7
 259        0       1536 mmcblk0p8
 259        1       6656 mmcblk0p9
 259        2       8192 mmcblk0p10
 259        3        512 mmcblk0p11
 259        4       1024 mmcblk0p12
 259        5       4096 mmcblk0p13
 259        6       2048 mmcblk0p14
 259        7       2048 mmcblk0p15
 259        8       4096 mmcblk0p16
 259        9        512 mmcblk0p17
 259       10      36864 mmcblk0p18
 259       11      54272 mmcblk0p19
 259       12       8192 mmcblk0p20
 259       13      51200 mmcblk0p21
 259       14        512 mmcblk0p22
 259       15        512 mmcblk0p23
 259       16        512 mmcblk0p24
 259       17      16384 mmcblk0p25
 259       18      16384 mmcblk0p26
 259       19      32768 mmcblk0p27
 259       20          4 mmcblk0p28
 259       21       5628 mmcblk0p29
 259       22    5242880 mmcblk0p30
 259       23     614400 mmcblk0p31
 259       24      40960 mmcblk0p32
 259       25     204800 mmcblk0p33
 259       26      20480 mmcblk0p34
 259       27       5120 mmcblk0p35
 259       28    8732672 mmcblk0p36
 253        0    3824976 dm-0
 253        1      84760 dm-1
 253        2     146616 dm-2
 253        3       4248 dm-3
 253        4    3764540 dm-4
 253        5      83340 dm-5
 253        6     144220 dm-6
 253        7       4096 dm-7
 253        8     604620 dm-8
 253        9      40236 dm-9
 253       10    8732672 dm-10

Not sure if less dm before GVH2...
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Okidoki...

    Seems I have to go the dd way...

    After so much trouble with netcat direct to PC... I am going the good old way...

    Okay still tooo hot bigger 3000 MB...
    Code:
    freshbl:/sdcard # dd if=/dev/block/mmcblk0p30 of=/sdcard/dumpSUPER.bin
    10485760+0 records in
    10485760+0 records out
    5368709120 bytes (5.0 G) copied, 222.376750 s, 23 M/s
    freshbl:/sdcard # exit
    freshbl:/ $ exit
    
    D:\Android\ADB>adb pull /sdcard/dumpSUPER.bin
    [ 37%] /sdcard/dumpSUPER.bin

    But for prism.img perfect way...

    Code:
    D:\Android\ADB>adb shell
    freshbl:/ $ su
    freshbl:/ # dd if=/dev/block/mmcblk0p31 of=/sdcard/dumpPRISM.bin
    1228800+0 records in
    1228800+0 records out
    629145600 bytes (600 M) copied, 34.618687 s, 17 M/s
    freshbl:/ # exit
    freshbl:/ $ exit
    
    D:\Android\ADB>adb pull /sdcard/dumpPRISM.bin
    /sdcard/dumpPRISM.bin: 1 file pulled. 2.5 MB/s (629145600 bytes in 237.542s)

    Btw. only this dumped p31 dump was able to be patched...
    imjtool have some additional Bytes... and fail...

    But IMHO I have now prism.img from FVD4...
    Soon I will write p31 via dd and look if my SM-R870 EVA8 will explode or accept this FVD4 file(s)...

    Best Regards

    Edit 1.

    Oh... tiny correction... seems generated AVB valid file... so will try to flash via Odin...

    Edit 2.

    Ohoh.. wrong idea...
    Odin hangs and not finish after many minutes...
    Seems not possible to reach recovery... automatic into "Kies Mode"...

    I was able to flash Original EVA8 prism... so SM-R870 still alive for more stupid ideas...

    Edit 3.
    Added Pic from up_param... this is how it looks + some cryptic Battery info
    1
    I am tiny step closer to FVD4...

    Code:
    D:\Android\ADB>adb push prismX.img /sdcard
    prismX.img: 1 file pushed. 1.1 MB/s (629145600 bytes in 533.692s)
    
    D:\Android\ADB>adb shell
    freshbl:/ $ su
    freshbl:/ # cd /sdcard
    freshbl:/sdcard # dd if=/sdcard/prismX.img of=/dev/block/mmcblk0p31
    1228800+0 records in
    1228800+0 records out
    629145600 bytes (600 M) copied, 68.742835 s, 8.7 M/s
    freshbl:/sdcard # reboot

    Rebooted proper and showed FVD4 under CSC... after:
    Code:
    *#1234#

    In Standalone Mode...

    Now trying to Factory Reset and look if pairing with Phone possible or...

    Best Regards

    Edit 1.

    Nice.

    This seems to work.
    Positive Sideeffect. No f%$ing FOTA update...

    I am only scared... because prism.img was unmodified "Original"...

    And for super.img I have many things to prepare... and maybe Security bypass mandatory...
    Autch...
    1
    Since Tizen...

    I have never any Watch nor Phone with eSIM.

    So I have 0 own knowledge about eSIM.

    All I "know" is eSIM is more joke... as easy to handle.

    I love my old SIM cards. I can hold them with my big fat fingers.
    I can cut them if they are tooo big after 20 years...

    eSIM sounds more pia... with all this Security Region Lock crap...

    Sorry, my private opinion.


    Best Regards
    1
    A

    I was able to fix my FOTA Update problem on my SM-R870 and my SM-R860...

    SM-R860 stupid me set something and disabled access to Recovery... only black screen...

    Long time ago I did something stupid...

    Only realized how deadly... as I was not able to finish Update to GVH2...

    Solution for my SM-R860:
    Bootloader unlock... this Reset param etc and Recovery is avalaible again...
    Then lock Bootloader again...
    Knox NOT dripped because nothing flashed...

    B

    My Update Problem with SM-R870 was deeper because rooted...

    Solution for me:

    Bootloader Lock
    Then downgrade via Odin to DUK1... via USB cable...

    Then FOTA worked...

    DUK1 ---> FVD4 ---> GVH2

    And my Root with help of Magisk 24.3 also work.


    C

    I have nothing tested under DUK1... not sure if same result. If flashed EVA8 files to my SM-R870... EVA8.

    But as FOTA work... correctly...


    This means sboot.bin downgrade really work.
    From EVA8 to DUK1


    Only as info.

    Best Regards
    1
    This video explains how to gain access to "non-supported" eSIM of independent carriers the world over
    Thank you. Would you mind to share or refer the link of the video please?
  • 5
    Looks like it could be harder since Tizen...

    A
    Stock Firmware for netOdin/Odin not available yet...

    B
    Combination Firmware not available yet

    C
    FOTA Delta File for study I have:
    Code:
    current_version=R860XXU1AUGE/R860OXM1AUGE/
    updated_version=R860XXU1BUH9/R860OXM1BUH9/

    D

    In this FOTA Delta file from SM-R860 I can see overview... from CSC... Region Code OXM:
    Code:
    csc_information=OXM
    
    ACR
    AFR
    ARO
    ASA
    ATO
    AUT
    BGL
    BNG
    BRI
    BTU
    BVO
    CAC
    CAM
    CHO
    CIS
    COO
    DBT
    DKR
    ECT
    EGY
    EUR
    EUX
    ILO
    INU
    ITV
    KOO
    KSA
    LTA
    LUX
    MEA
    MID
    MRU
    MWD
    MXO
    MYM
    NEE
    NPL
    PAK
    PEO
    PHE
    PHN
    ROM
    SEB
    SEE
    SEK
    SER
    SIO
    SKZ
    SLK
    SWA
    TGY
    THO
    TPA
    TPH
    TTT
    TUN
    TUR
    UPO
    UYO
    XAA
    XAC
    XEF
    XEH
    XEO
    XEZ
    XFA
    XJP
    XME
    XNZ
    XSA
    XSE
    XSG
    XSK
    XSP
    XTC
    XXV
    ZTO

    More things... comes... later...

    Best Regards
    5
    No idea when Full firmwares for study leak...

    Meanwhile to understand maybe more about funny Region... helpfull this Android App to check Firmware:

    It is possible to decrypt from Test Server...

    Then maybe more clear...


    OXM seems also for DBT ZTO and so on...

    A
    In theory linked FOTA Delta should work for AUGE DBT or SER or ZTO...

    Question is only how to update manually...

    B
    Roll out official could be in waves... but could be also more funny like we allready knows...

    We will see the future of GW4 support.

    Best Regards
    5
    Tiny progress...

    GFX Card is Nvidia GTX 460...

    I thought this is Samsung joke with G account...

    Anyway. I have Root access to this Image...

    So will do some stupid tests...

    Best Regards
    5
    Tiny progress...

    Searched in system.img... 3 GB File for text string:
    Code:
    sdk_gwear_x86

    27 hits... then I changed few of them and renamed...
    Now I see:
    Code:
    sdk_gwear_x05

    05 is inside:
    Code:
    # begin common build properties
    # autogenerated by build/make/tools/buildinfo_common.sh
    ro.product.build.date=Thu Dec 16 16:58:02 UTC 2021
    ro.product.build.date.utc=1639673882
    ro.product.build.fingerprint=google/sdk_gwear_x86/generic_x86_arm:11/RWD4.211013.004/8008904:userdebug/dev-keys
    ro.product.build.id=RWD4.211013.004
    ro.product.build.tags=dev-keys
    ro.product.build.type=userdebug
    ro.product.build.version.incremental=8008904
    ro.product.build.version.release=11
    ro.product.build.version.release_or_codename=11
    ro.product.build.version.sdk=30
    ro.product.product.brand=google
    ro.product.product.device=generic_x86_arm
    ro.product.product.manufacturer=unknown
    ro.product.product.model=sdk_gwear_x05
    ro.product.product.name=sdk_gwear_x06
    # end common build properties
    #
    # ADDITIONAL PRODUCT PROPERTIES
    #
    ro.build.characteristics=emulator,nosdcard,watch
    persist.traced.enable=1
    ro.com.google.ime.system_lm_dir=/product/usr/share/ime/google/wear_lms
    dalvik.vm.systemservercompilerfilter=speed-profile
    ro.product.vndk.version=30


    Okidoki:
    Code:
    ro.product.product.model=sdk_gwear_x05


    Need few attempts...

    But good I can edit system.img without crash... so no Hash check or something in this Direction...

    Edit 1.

    Step 1 done in funny riddle... puzzle...

    Need more time to correct the other props...

    Goal is to enter exact Playstore for GW4... and/or Samsung Apps...

    In Emulator on PC...
    5
    "We" have still tiny problems...

    My problemS

    A
    I have NO device nor plan to buy in near future...

    B
    + no full Firmware for Odin/netOdin nor study...
    + no Combination Firmware...

    C
    No Service Manual leak...

    D
    Community to find solution is sooooooo f. huge...
    This problem is not new... something like this I know since years...

    Feel free to find solution for us. :cowboy:


    Thanx in advance.


    No joke.

    Feel free to do something.

    Best Regards