[FIRMWARE][AT&T 3.10] 2.22 Firmware ( New Partition Layout )

[xXminiWHOOPERxX]

These Files are for the HTC One Mini (M4), Do not under any circumstances flash these on a different device!
I am simply posting these for their use. As you already know, I am not to blame if you mess up your device.
You are fully responsible for downloading and flashing any file posted by me!
By downloading any of these files you accept these terms.

Requirements :
- S-Off
- SuperCID

Flashing Instructions :
These can ONLY be flashed in fastboot mode, NO EXCEPTIONS!!!
(please do not ask for Recovery Flashable zips, I will not make them as of yet!)

*** Boot into Bootloader/Fastboot USB Mode ***

Step 1) fastboot oem rebootRUU

*** Wait for the device to reboot to a black screen with an HTC logo ***

Step 2) fastboot flash zip firmware.zip

*** When it says it is done in the terminal/cmdprompt execute the following ***
[The green bar only fills up about 75% of the way]

Step 3) fastboot reboot-bootloader

Firmware Links

Firrmware.zip

I am not taking credit for the files, I only take credit for the guide and links I provide.​

XDA:DevDB Information
2.22 Firmware, Tool/Utility for the HTC One Mini

Contributors
xXminiWHOOPERxX

Version Information
Status: Stable
Current Stable Version: 1.0.0
Stable Release Date: 2014-05-21

Created 2014-05-22
Last Updated 2014-06-20

 

[garapon]

deleted

 

[dalfshiro]

is this for AT&T only??? sorry for asking..
soory but i dint understand how to flash this in fastboot...

fastboot flash zip PL83IMG_#.##_hboot.zip (cant understand this)

maybe you can rename it to simple name without # character.maybe hboot.zip and try flash again

 

[rosi91]

Will flashing this wipe system data or anything?
Sorry for the noob question :silly:

 

[garapon]

writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 4.516s

im getting this error guys


edited: got it,i just changed to supercid

 

[xXminiWHOOPERxX]

writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 4.516s

im getting this error guys


edited: got it,i just changed to supercid

Okay since you know what your doing... If you go to flash any Rom now you have to manually change mount points of insertcoin to what you see in this script or replace it with this one

https://www.dropbox.com/s/h1g9574a4b7z8qv/updater-script

Sent from my HTC One mini using Tapatalk

 

[garapon]

Okay since you know what your doing... If you go to flash any Rom now you have to manually change mount points of insertcoin to what you see in this script or replace it with this one

https://www.dropbox.com/s/h1g9574a4b7z8qv/updater-script

Sent from my HTC One mini using Tapatalk

heres what i did , i flashed this firmware to have the new partition layout (success so im on the new partition layout now) then i flashed the modded hboot by cm(the partition layout remains)...

 

[xXminiWHOOPERxX]

heres what i did , i flashed this firmware to have the new partition layout (success so im on the new partition layout now) then i flashed the modded hboot by cm(the partition layout remains)...

Yes so you have to change partition layout in Rom zips in order to flash rims anymore

Sent from my HTC One mini using Tapatalk

 

[garapon]

Yes so you have to change partition layout in Rom zips in order to flash rims anymore

Sent from my HTC One mini using Tapatalk

thank you but im sticking on Insertcoin

 

[xXminiWHOOPERxX]

thank you but im sticking with Insertcoin

Yes.. but if you plan to reflash InsertCoin your gonna have to replace that file with the file inside IC. Since your on the new partition layout

Sent from my HTC One mini using Tapatalk

 

[garapon]

Yes.. but if you plan to reflash InsertCoin your gonna have to replace that file with the file inside IC. Since your on the new partition layout

Sent from my HTC One mini using Tapatalk

how about the ota update??? i will do nothing right? ill just have to click update and thats it...ryt??

 

[xXminiWHOOPERxX]

how about the ota update??? i will do nothing right? ill just have to click update and thats it...ryt??

Already been discussed.. ota has been scratched as I'm working on 3.0.0

Sent from my HTC One mini using Tapatalk

 

[garapon]

Already been discussed.. ota has been scratched as I'm working on 3.0.0

Sent from my HTC One mini using Tapatalk

thank you...youre awesome!!!!! mwuah!!!

---------- Post added at 02:46 PM ---------- Previous post was at 02:31 PM ----------

Okay since you know what your doing... If you go to flash any Rom now you have to manually change mount points of insertcoin to what you see in this script or replace it with this one

https://www.dropbox.com/s/h1g9574a4b7z8qv/updater-script

Sent from my HTC One mini using Tapatalk

ill just put this inside the ic rom zip right dev???

 

[xXminiWHOOPERxX]

thank you...youre awesome!!!!! mwuah!!!

---------- Post added at 02:46 PM ---------- Previous post was at 02:31 PM ----------



ill just put this inside the ic rom zip right dev???

Yes only where the other updater-script is

Sent from my HTC One mini using Tapatalk

 

[garapon]

Yes only where the other updater-script is

Sent from my HTC One mini using Tapatalk

thank you..waiting for 3.0.0

 

[cmvienneau]

Okay since you know what your doing... If you go to flash any Rom now you have to manually change mount points of insertcoin to what you see in this script or replace it with this one

https://www.dropbox.com/s/h1g9574a4b7z8qv/updater-script

Sent from my HTC One mini using Tapatalk

or you could build using this fstab layout so no editing would be required.

/dev/block/platform/msm_sdcc.1/by-name/radio /firmware_radio vfat ro,shortname=lower wait
/dev/block/platform/msm_sdcc.1/by-name/adsp /firmware_q6 vfat ro,shortname=lower wait

/dev/block/platform/msm_sdcc.1/by-name/boot /boot emmc defaults defaults
/dev/block/platform/msm_sdcc.1/by-name/recovery /recovery emmc defaults defaults
/dev/block/platform/msm_sdcc.1/by-name/devlog /devlog ext4 noatime,nosuid,nodev,noauto_da_alloc,barrier=0 wait
/dev/block/platform/msm_sdcc.1/by-name/system /system ext4 ro,noatime,barrier=0 wait
/dev/block/platform/msm_sdcc.1/by-name/cache /cache ext4 nosuid,nodev,noatime,barrier=0 wait,check
/dev/block/platform/msm_sdcc.1/by-name/userdata /data ext4 noatime,nosuid,nodev,noauto_da_alloc,barrier=0 wait,check,encryptable=/dev/block/platform/msm_sdcc.1/by-name/extra

 

[mgostom]

If you're Supercid, you'll be ok as far as cidnum goes. However, I believe the firmware.zip file should be renamed accordingly with the M4 model id (PO5822000) using the first 4 characters. At least, it used to be the case with older HTC models.

1. PO58IMG -> Model ID (first 4 characters + IMG)
2. #.## -> software version it came from, 3.10
3. hboot.zip or Radio.zip -> (bootloader or baseband) --> Recovery.img is NOT included in the attachment :good:

Please let me know if the model ID number doesn't apply in this scenario. I would like to know.

 

[xXminiWHOOPERxX]

If you're Supercid, you'll be ok as far as cidnum goes. However, I believe the firmware.zip file should be renamed accordingly with the M4 model id (PO5822000) using the first 4 characters. At least, it used to be the case with older HTC models.

1. PO58IMG -> Model ID (first 4 characters + IMG)
2. #.## -> software version it came from, 3.10
3. hboot.zip or Radio.zip -> (bootloader or baseband) --> Recovery.zip is NOT included in the attachment :good:

Please let me know if the model ID number doesn't apply in this scenario. I would like to know.

I pulled this from the OTA from AT&T so I left it at the name it was but removed boot and recovery from it... And I didn't make seprate threads because everyone should update there firmware...as lower firmware can lead to bugs with newer roms.

Sent from my HTC One mini using Tapatalk

 

[mgostom]

I understand, don't get me wrong, this is great. I was just referring to your notes, specifically "PL83IMG". It confused me because I'm pretty sure "PL83" is for Droid DNA (I used to have one).

---------- Post added at 02:50 PM ---------- Previous post was at 02:30 PM ----------

But the way, it's really awesome to see another dev for ATT

Sent from my XT1053 using Tapatalk

 

[xXminiWHOOPERxX]

I understand, don't get me wrong, this is great. I was just referring to your notes, specifically "PL83IMG". It confused me because I'm pretty sure "PL83" is for Droid DNA (I used to have one).

---------- Post added at 02:50 PM ---------- Previous post was at 02:30 PM ----------

But the way, it's really awesome to see another dev for ATT

Sent from my XT1053 using Tapatalk

Well I wanna update IC but need official sense 6 in order too... 2.6 was luck

Sent from my HTC One mini using Tapatalk