[Firmware] Junsun V1 8667Q - 8G/128G VHD QLED

[prochoice]

This is what puts me in the drive.

Thanks

 

[Ratralala]

JUNSUN 8/128 Android 11, new device, new here ...
All well so far, only thing is with this icon.
it keeps appearing after the car is placed in R Revers and i have to press Back to make it go away...
Anyone know what this red engine bonet open is? and how can i Stop it showing up?
THANK YOU
P.S. iv'e tryied many thing in the 8878 menu

 

[robfox1975]

The firmware is in build.prop. ro.forfan.adaptans.enable=1

ro.forfan.adaptany.twidth=1280

ro.forfan.adaptans.height=720. Ossuret has ro.forfan.adaptany.enable=1 in build.prop

ro.forfan.adaptany.twidth=1280

ro.forfan.adaptans.height=720

forfan.extscreen.twidth=1280

forfan.extscreen.height=720. Ossureta went outside. it will dump you Junsun firmware. I struggled for 30 minutes to do this. it is best to disconnect the cube from the radio with the ignition off, wait 5 minutes, connect the cube, press reset, turn on the ignition and touch the display with five fingers. The flash drive must still be connected before performing the procedure. https://1drv.ms/u/s!Atz6rzSxowxlkq99W5FLmsI-Ul7jDg?e=MaJqfW

Well I have tried the one you send link to and still didnt work, tried both usb slots.....I guess it is just not going to recover. I have been looking at the files. The ones that went wrong have revealed something I think I may have somehow mixed up the upd files as the link i sent you the upd file is empty with no checksum. The old files I flashed the upd does have a checksum but it is different than what an md5 check on the bin file, so it must have been a wrong md5

Md5 check on 8667.bin = 2f37deeb83621511b83211f0a7cce57d
upd file shows 617dbe997a0b85e339aaa95639f89006

I think that explains what happened

 

[wybitny2]

The problem I have is that when I turn the unit on, it loads home and then goes straight to the radio.
I don't know if this is normal behaviour. What I want is that when I turn it on, it stays in home without opening the radio application.

Is this behaviour like this?

Thanks again

It is possible to turn off the radio application, but then I do not know if it will recover, I know that it will return to factory settings after a reset, why do you want to change it when everything is fine, you are looking for problems

 

[wybitny2]

JUNSUN 8/128 Android 11, new device, new here ...
All well so far, only thing is with this icon.
it keeps appearing after the car is placed in R Revers and i have to press Back to make it go away...
Anyone know what this red engine bonet open is? and how can i Stop it showing up?
THANK YOU
P.S. iv'e tryied many thing in the 8878 menu

You have a faulty bonnet sensor and that's why you have a problem, it's not the radio's fault

 

[wybitny2]

Well I have tried the one you send link to and still didnt work, tried both usb slots.....I guess it is just not going to recover. I have been looking at the files. The ones that went wrong have revealed something I think I may have somehow mixed up the upd files as the link i sent you the upd file is empty with no checksum. The old files I flashed the upd does have a checksum but it is different than what an md5 check on the bin file, so it must have been a wrong md5

Md5 check on 8667.bin = 2f37deeb83621511b83211f0a7cce57d
upd file shows 617dbe997a0b85e339aaa95639f89006

I think that explains what happened

If you have older update files, try to upload older files, it should go back without any problem, you just need to know how to restore, you did this

 

[Ratralala]

It is possible to turn off the radio application, but then I do not know if it will recover, I know that it will return to factory settings after a reset, why do you want to change it when everything is fine, you are looking for problems

Uncheck This

 

[Ratralala]

You have a faulty bonnet sensor and that's why you have a problem, it's not the radio's fault

Thank you
But it’s not that for sure since a friend with same VW PASSAT has the exact same issue! I will ask him to take a picture on His 10” unit.. this ine is 9”.

 

[wybitny2]

Uncheck This

I forgot about that, that's a good way.

 

[wybitny2]

Thank you
But it’s not that for sure since a friend with same VW PASSAT has the exact same issue! I will ask him to take a picture on His 10” unit.. this ine is 9”.

Enter the canbus code 8878 there are door opening settings, uncheck and it is not recommended to display.

 

[prochoice]

It is possible to turn off the radio application, but then I do not know if it will recover, I know that it will return to factory settings after a reset, why do you want to change it when everything is fine, you are looking for problems

I understand that the most normal thing is that it stays on the main screen, and the radio application does not open and it stays there. That would be the correct operation. I am not looking for problems but in other radios As in the original, the main screen is the one that should remain, not always opening the radio application or staying in the background.

 

[Ratralala]

Enter the canbus code 8878 there are door opening settings, uncheck and it is not recommended to display.

Thak you
I will try later and come back..

 

[wybitny2]

I understand that the most normal thing is that it stays on the main screen, and the radio application does not open and it stays there. That would be the correct operation. I am not looking for problems but in other radios As in the original, the main screen is the one that should remain, not always opening the radio application or staying in the background.

enter the code 8878, others, change what is in the photo, the radio will not start

 

[prochoice]

enter the code 8878, others, change what is in the photo, the radio will not start

I'm going to try it, thanks! The version you told me yesterday is valid for my unit.

Thanks a lot

 

[wybitny2]

I'm going to try it, thanks! The version you told me yesterday is valid for my unit.

Thanks a lot

What company do you have radio, send a link, be careful not to brick the radio

 

[prochoice]

What company do you have radio, send a link, be careful not to brick the radio

This is my radio unit 8GB/128

€ 85,97 44%de DESCUENTO | Junsun-autorradio V1pro con GPS para coche, reproductor Multimedia con Android, 2 din, 4G, Carplay, para SKODA Octavia 3 A7 2013-2018

https://a.aliexpress.com/_EGbwb3X

 

[robfox1975]

If you have older update files, try to upload older files, it should go back without any problem, you just need to know how to restore, you did this

Ok so by checking through all files one by one it seems that the 8667.bin file was from the official firmware sent by brogotek XRC-8667 升级软件 Q腾实UI多合一-国外-1280x720_v32_20220223 but the upd file with the checksum 617dbe997a0b85e339aaa95639f89006 matches with this version 8667Q腾实UI05-国外-1280x720_v36_20220825.
So I think it is certain that by mistake i put a wrong 8667.upd file on the usb and that has bricked it.
I think it has corrupted the bootloader and it will now not read the usb disk, possibly the usb drivers have been wiped as that would explain why no matter which software version i try nothing happens

 

[wybitny2]

Ok so by checking through all files one by one it seems that the 8667.bin file was from the official firmware sent by brogotek XRC-8667 升级软件 Q腾实UI多合一-国外-1280x720_v32_20220223 but the upd file with the checksum 617dbe997a0b85e339aaa95639f89006 matches with this version 8667Q腾实UI05-国外-1280x720_v36_20220825.
So I think it is certain that by mistake i put a wrong 8667.upd file on the usb and that has bricked it.
I think it has corrupted the bootloader and it will now not read the usb disk, possibly the usb drivers have been wiped as that would explain why no matter which software version i try nothing happens

Each radio is salvageable after uploading the wrong update. It's happened to me twice. Knowing the procedure, having the original update, the radio can be restored without any problem. I do not know what will happen if the control files are wrong, I do not know if the radio can then be saved. It only comes to mind. enter recovery mode, do a factory reset, somewhere I read that the radio will start because it has security files for such an eventuality. Recovery: press reset and hold for 10 seconds, after about 11 seconds in 1 second interval, press reset 3 more times and just put your finger in the display. Like in this movie.

 

[wybitny2]

This is my radio unit 8GB/128

€ 85,97 44%de DESCUENTO | Junsun-autorradio V1pro con GPS para coche, reproductor Multimedia con Android, 2 din, 4G, Carplay, para SKODA Octavia 3 A7 2013-2018

https://a.aliexpress.com/_EGbwb3X

It seems that the update 8667Q军灿UI02-国外-VHD720x1280_v23_20220801 should go smoothly

 

[prochoice]

It seems that the update 8667Q军灿UI02-国外-VHD720x1280_v23_20220801 should go smoothly

Thank you! I have updated it and I already get the logos of the car brands!