[Firmware] Junsun V1 8667Q - 8G/128G VHD QLED

[wybitny2]

That sounds like an old problem. look here:

Problem with Sygic using Google tts on px5

Hi, I have a problem using Sygic with tts. When I use Sygic standard voice the hu is pausing the radio or music player. But when I switch to Google tts in Sygic sound settings the music wont stop and it‘s not possible to understand the tts...

forum.xda-developers.com

============
This is a known issue. The unit regulates voice volume with navigation app. Sygic is assigned as navigation app so the voice works well. Google tts engine is not navigation app so it does not work even though it is used in sygic.
There is a trick that I used to have. Assign Google tts as navigation app and it will work with sygic, but I you will loss the navigation key on the unit. To get the key back you can use mtcd-tools to assign sygic to the navigation key.
==========
There are several possible solutions in that topic.

The official software went v28, google TTS voices can no longer be set as navigation, but the link helped, I didn't expect it, the app went, and setting the voices in the 8878 code works, I have to check if it works without the application. Thank you very much

 

[TorstenH]

The official software went v28, google TTS voices can no longer be set as navigation, but the link helped, I didn't expect it, the app went, and setting the voices in the 8878 code works, I have to check if it works without the application. Thank you very much

That's strange because on MTK825X devices it doesn't matter which app gets set as navigation app - volume controls always change voice volume as soon as Google TTS is active. But I know on 825X the same problem occurred ages ago which was fixed by a fw update.

 

[wybitny2]

That's strange because on MTK825X devices it doesn't matter which app gets set as navigation app - volume controls always change voice volume as soon as Google TTS is active. But I know on 825X the same problem occurred ages ago which was fixed by a fw update.

It's annoying, but the important thing is that something can be done about it, that there is a way around it. Junsun doesn't react to it, he probably knows it's a problem but silence

 

[wybitny2]

Regarding the TTS quiet voices, I got this response from Junsun, I quote " Hi friend,
Thanks for your message.
Due to copyright and sanctions by Google, we cannot ensure that this software is compatible with our machines
I hope you can understand
If you have any questions, please do not hesitate to contact us.
We are always ready at your service.
Best regards"

 

[TorstenH]

Regarding the TTS quiet voices, I got this response from Junsun, I quote " Hi friend,
Thanks for your message.
Due to copyright and sanctions by Google, we cannot ensure that this software is compatible with our machines
I hope you can understand
If you have any questions, please do not hesitate to contact us.
We are always ready at your service.
Best regards"

When friends talking bull****...

 

[wybitny2]

When friends talking bull****...

I just don't think it's true, I can't handle it, I want to kill Google with guilt. It works for me, so I don't feel like explaining it to them. Someone wrote that there is something in the software that kills apps in the background, I can't look for it, maybe you know something about it maestro

 

[TorstenH]

I just don't think it's true, I can't handle it, I want to kill Google with guilt. It works for me, so I don't feel like explaining it to them. Someone wrote that there is something in the software that kills apps in the background, I can't look for it, maybe you know something about it maestro

Duraspeed is pre-installed on the units. But it seems that it was disabled in the newer firmwares. You could check this by (temporarily) install AppSwitcher.
The Duraspeed setting (section others) reflects the property of build.prop file.

 

[wybitny2]

Duraspeed is pre-installed on the units. But it seems that it was disabled in the newer firmwares. You could check this by (temporarily) install AppSwitcher.
The Duraspeed setting (section others) reflects the property of build.prop file.

Can you post a link to AppSwitcher mediatek 8667

 

[TorstenH]

Can you post a link to AppSwitcher mediatek 8667

[Discontinued] AppSwitcher - smart SWC launcher (for Junsun, Xtrons and similar devices) incl. autostart

AppSwitcher SWC (Steering Wheel Control) app launcher This thread gets continued here Stay focused on the street and don't touch the head units display to switch between apps. Support the development of this free app via...

forum.xda-developers.com

 

[wybitny2]

[Discontinued] AppSwitcher - smart SWC launcher (for Junsun, Xtrons and similar devices) incl. autostart

AppSwitcher SWC (Steering Wheel Control) app launcher This thread gets continued here Stay focused on the street and don't touch the head units display to switch between apps. Support the development of this free app via...

forum.xda-developers.com

Vendor.img , persist.vendor.duraspeed.support=1 is enabled. It only appears in vendor.img/build.prop, when looking for it in system.img\system\build.prop, it doesn't exist there.

 

[TorstenH]

Vendor.img , persist.vendor.duraspeed.support=1 is enabled. It only appears in vendor.img/build.prop, when looking for it in system.img\system\build.prop, it doesn't exist there.

I think the relevant property is
persist.vendor.duraspeed.app.on=X

X = 0 or 1

 

[wybitny2]

I think the relevant property is
persist.vendor.duraspeed.app.on=X

X = 0 or 1

But that 0 is off, 1 is on?

 

[TorstenH]

But that 0 is off, 1 is on?

Yes. 0 is off

 

[wybitny2]

Yes. 0 is off

I checked two software, it's not turned off, it's always on 1

 

[TorstenH]

I checked two software, it's not turned off, it's always on 1

Then Duraspeed may kick your background activities and services. You should find corresponding entries in Android system log.

 

[wybitny2]

Then Duraspeed may kick your background activities and services. You should find corresponding entries in Android system log.

Duraspeed managed to turn off I don't know what it was about I have 8GB of ram the code showed that I always have ram on the contact, now I have 2GB free. Thank you you are great

 

[wybitny2]

I have firmware 8667Q军灿UI02-国外-1280x720_v28_20230302, I don't play root anymore, I don't test anything, there are pluses but there are also minuses, sometimes something stops working when I kick too hard. I prefer a working radio than constant repairs because something does not work because I play too hard on the radio. I have a friend who fixes radios, I'd rather ask him for magisk. I did everything under myself, tts voices are good, I turned off duraspeed, applications are not put to sleep thanks to this, tts voices from google are heard well. This is something strange with TTS voices, the same software after reset or factory settings is different, half and half can be heard well or not, there is no rule.

 

[Davidman66]

MOD TRANSLATION
"Hello everyone I'm brand new I have a Junsun v1 plus 2x32go I installed the latest flawless V81 firmware, however I no longer have the color application to change the colors of the touch buttons does anyone have the APK I am on android 12 thank you friends"
******************************************
Bonjour a tous je suis tout nouveau j'ai un Junsun v1 plus 2x32go j'ai bien installer la derniére firmware V81 impeccable parcontre j'ai plus l'application color pour changer les couleur des boutons tactile quelqu'un aurait il l'APK je suis sous Android 12 merci les amis

 

[simplepinoi177]

MOD TRANSLATION
"Hello everyone I'm brand new I have a Junsun v1 plus 2x32go I installed the latest flawless V81 firmware, however I no longer have the color application to change the colors of the touch buttons does anyone have the APK I am on android 12 thank you friends"
******************************************
Bonjour a tous je suis tout nouveau j'ai un Junsun v1 plus 2x32go j'ai bien installer la derniére firmware V81 impeccable parcontre j'ai plus l'application color pour changer les couleur des boutons tactile quelqu'un aurait il l'APK je suis sous Android 12 merci les amis

@Davidman66, Greetings, and welcome to XDA. As a friendly reminder, we ask all members to please post in English as stipulated by Forum Rule 4 (quoted below) -- that you just agreed to when you first registered your account; feel free to include your original message under the English message if you wish. If you do not know English, I encourage you to use any of the resources in the quote below. Your post has been translated as a one-time courtesy.

Also, as per Forum Rule 5 (also quoted below), I have removed your duplicated post (to "bump" your inquiry) made within an hour after your first post. As stated, "You can bump your unanswered question once every 24 hours. Duplicate threads and posts will be removed." "Not everyone is online at the same time so it might take a while before you receive an answer."


Thank you for your cooperation, and have a good one!
simplepinoi177 FSM (Forum Specific Moderator)

4. Use the English language.

We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ , https://www.babelfish.com/ or https://fanyi.baidu.com/#auto/en or use one of your choice.

5. Create a thread topic or post a message only once, this includes external links & streaming media.
...Not everyone is online at the same time so it might take a while before you receive an answer.

• You can bump your unanswered question once every 24 hours
• Duplicate threads and posts will be removed

 

[sebaes]

Hello Everyone,

I hope everyone is good here !

Just wanted to check if someone have a version higher than the version V45 ?
(The last firmware I downloaded is "8667Q腾实UI05-国外-1280x720_v45_20230103".)
I still have problem when it's hot inside the car, the unit doesn't start still I don't put AC during 5 minutes...

If someone could help that would be nice !

Thanks !
Séb