Hey Newbie here, Can someone point me in the direction on how to update my Roadanvi radio using this firmware? I believe it uses this same build
What's included in the new update? I want to get my android auto to do split screen, will this get me that option?
i didnt tested yet. But i dont beleive that the the firmware is adding something. My opinion is that probably is fixing bugsWhat's included in the new update? I want to get my android auto to do split screen, will this get me that option?
Where do you get the updates from?i didnt tested yet. But i dont beleive that the the firmware is adding something. My opinion is that probably is fixing bugs
from aliexpress seller
Is this update suitable for MTK 8259P?Is this android 11 and UI3?What's included in the new update? I want to get my android auto to do split screen, will this get me that option?
Yes UI3 and android 11. I tested and android auto split screen works!Is this update suitable for MTK 8259P?Is this android 11 and UI3?
Thanks for Reply
I dont know if it works but on my Junsun v1 pro with 8667q cpu is working. i have ff_866x and the build number the same as yours
I tested a while ago with music played from the phone and there are no problemsI faced problems with bluetooth streaming music in my car. Connecting a samsung phone or iphone i was starting to hear music throught bluetooth and within a few seconds the music stops.
i dont know if i am pairing the phone correclty .
I DONT KNOW WHAT IS WRONG
I dont know from the menu 8878 others what to choose bluethoth 1 or 2 ?
With the new firmware seeb to be OK the blluetoothI tested a while ago with music played from the phone and there are no problems
No it is not. It is for MTK8667Is this update suitable for MTK 8259P?Is this android 11 and UI3?
Thanks for Reply
If anyone has newer software please post, I will be thankful. Adding applications to the home screen works.
Forgive me, I can no longer find where there is an option to turn down the music when I put the car in reverse. Today I looked for it but I can't remember anymore..
Which camera do you own? Mine is a Junsun S700 and this is the app that comes bundled in the camera storageHave anyone has problem with Front ADAS Camera?
Chinese send mi S700S.apk but it doesn't help. I see nothing.
The app shows message "Please insert TF card".
1. long pressPlease, can someone explain to me how to adjust the reverse gear lines?
Which camera do you own? Mine is a Junsun S700 and this is the app that comes bundled in the camera storage
Hello and good morning, @Morsartt Welcome to XDA! I hope you'll always get the support you require and have enjoyable times on our platform.Mod edit - translated by https://translate.google.com/. Oswald Boelcke, Senior Moderator.
Does anyone know what I need to change to make the sound work immediately after turning on the radio? Because I have a problem that when I turn on the radio and play music from Spotify, there is no sound, I have to switch to the regular FM radio, the sound works and then everything works as it should.
*********************************
Czy ktoś wie co muszę zmienić aby dźwięk działał od razu po włączeniu radia? Bo mam taki problem, że jak włączam radio i odtwarzam muzykę ze Spotify to nie ma dźwięku, muszę przełączyć na zwykłe radio FM, dźwięk działa i wtedy wszystko działa jak należy.
Hi, I'm using this app. (use Default Home App Settings menu)
Maybe yes... I will deal with it, because I want to make the side and bottom bars smaller so that the NAVI window can be a little biggerHello, Can you perhaps incorporate a large clock here?
Greetings and happy Eastern
Miang
No that I'm aware of, only thing you can do to avoid it is not changing settings very often in the 8878 menu codeIs there a way to prevent the reset of the radio stations when saving changes in the 8878 menu code?
The main screen icons and radio stations are allways reseted.
Hi!Hi, I bought Junsun v1 plus a week ago and I have the same problem.
View attachment 6089889
No keys in recovery, no USB for flashing detected (flashboot and adb on my Debian).
Exactly, not work at all. If "USB2 debug" is disable the both USB work as host. If I want to change the mode it fails.
View attachment 6089890
Anyone could help me to flash patched boot(by Magisk)?
Hi, may I know how do I change the boot animation on startup ? All I can choose are the boot logos (pw 5678) and after the boot image there’s a short animation of Android word with fading grey. I’d like to learn about changing the animation.
Hi again, these were my experiences with my third firmware update. (first look)UI is similar than others... I'll try it in the afternoon and write if I see any differences
View attachment 6067526View attachment 6067527
Use Topic swithing app to change UI03 from UI04
Well, my PIP project and hope are returnedHi again, these were my experiences with my second firmware update. This time it was NOT a regular update, because Ossuret/Hipzo firmware was added to the JUNSUN V1 device. I did it because for some inexplicable reason, I really like Launchers that use PIP. And unfortunately, this is not allowed in the JUNSUN V1 firmware.
I read a warning here in the forum about the build.prop file, but in this case it WAS EXACTLY THE SAME in the two firmwares!
So, My device is a JUNSUN V1 Plus: MS94NV UK 9 inch 4G+64G.
Actual (original JUNSUN) firmware:
8667Q军灿UI02-国外-1280x720_v46_20231122.zip-Tan.zip
Target (Tengshi) firmware:
8667Q腾实UI05-国外-1280x720_v53_20230914.zip
Firmware changes:
8667Q军灿UI02-国外-1280x720_v46_20231122 X=1280 Y=720 --> 8667Q腾实UI05-国外-1280x720_v53_20230914 X=1280 Y=720
Result:
The installation went well (Note: the screen was rotated 90 degrees counterclockwise during installation. After the restart, the display was normal), everything works fine. The imported boot logo and the factory settings was remains! I have V1Plus with build in FAN. FAN application and FAN setting (factory menu) is missing. So the FAN is not working!
Surprisingly, everything works fine! The Google maps runs great in the small window and other programs also works very well.
The Carletter version is older, 7.5.8.20230809, but I successfully updated this with version 7.7.3.20231024, which I extracted (using 7-Zip) from the JUNSUN firmware file.
A solved the FAN problem ( in a non-standard way ), but unfortunately I will not publish the method. Because e.g. if any Launcher is installed, it is not possible to reassign the HOME button to Tengshi launcher from then on. And there may be other, not yet experienced, problems. However, the FAN already works and the look of the radio/music player/equalizer is the usual JUNSUN. (Perhaps you can figure out what I did )
Original screens, before my "FAN modification":
View attachment 6061582
View attachment 6061583
View attachment 6061584
View attachment 6061585
Conclusion: this firmware can be used (at your own risk!) with JUNSUN V1, if there is no FAN in it and you want a PIP solution. And if you like this design.
I will definitely use this for a while, I will share the new comments
UPDATE! "Only one day in the paradise". After 24 hour.... The Tengshi firmware on JUNSUN V1 not working correctly! Do not install or if you already installed, removed it!
Hi!Yep, but V39 is absolutely missing in action, no clue why because that's the firmware most recent Junsun head units come with.
Hi can anyone tell me what update i need for this sofware please