This software is for Junsun 8667Q radio 腾 实 UI05- 国外 -1280x720_v36_20220825, sorry I was wrong. I had it installed, too many errors, the second thing I do not like the new ui.
[Firmware] Junsun V1 8667Q - 8G/128G VHD QLED
- Thread starter Arky21
- Start date
Thank you for the answer. Can you also answer my second question about the widthband height settings?
This setting prevents the radio from starting, I don't know how to explain it to you. means the image is reversed and will not work on Junsun. ro.forfan.adaptany.twidth=1280
ro.forfan.adaptany.theight=720
forfan.extscreen.twidth=1280
forfan.extscreen.theight=720
Okay I understand. And where do you get These settings? Can you find them in a configuration file?
Yes, I am looking for them in the configuration peak, I want to be sure
Okay thank you.
Another question. When installing the Update, does this also reset the settings in the factory setting. For example the can settings and all the setting you can access via the 8878 Code?
Hm, I would have like to get this All resetet. Do you know how this is possible?
I have a Problem with my Touch keys and i think this is related to the settings in the "other" Menu of the factory setting (8878). There are setting for touchX and touchY and i need the numbers that was the default.
Do you still have the problem? I think this is because your car never shuts down the Power from the headunit. When you disassemble it and unplug and replug the wires it should Start afterwards.
I will be in the car, I will take a photo for you, but not today, when I am in the car, this photo will appear
Hello, code 8878, you click on the icon I marked, here you have a factory reset. You will lose built-in navigation, voice dialing will be lost.
Attachments
Thank you very much! I already tried it but the settings werde not reseted. I even tried to reinstall the Firmware without any luck. I got a picture from someone here in the forum. The values for Touch X and TouchY should be 1024 and 600. But i can't change them.
That picture is not from my Radio. In my Radio the values are touchx=0 and touchy=0. And i'm quite sure this is the reason why i can't use my Touch keys. Could you save your configuration of this Menu and send it to me? Maybe i can Import it.
In two days I will be able to do it, I can't be sorry sooner
Hi sorry for my english! I also have such a system 8/256 V1 PRO or something similar, unfortunately I don’t know the firmware version. I also can't turn on the bluetooth tethering. I can’t transfer music and other files from the phone to the radio, although before resetting to the factory settings everything seemed to work and the picture and applications were transferred
Attachments
Last edited:
Tomorrow I will have a car, I will do it tomorrow. Tomorrow is Saturday, today I did not have time, still something, still running after everythingHi wybitny2,
Were you able to save you configuration ?
Kind regards
Last edited:
Similar threads
Top Liked Posts
-
1
Root = MAIN = \
Just select the device ín the file manager. No folder needed!!!
PS: no one understand what is the "root directory" ?1
Don't worry! V5 is contains a little bug related the doors warning, otherwise stable! I use this too!
v39 is "stable", because many head units came out with this software (based on forum feedback). And if you want, you can update to v39 at any time
I recommended v39 to him because there was something interesting fan error with v34. In this case, it is better to update in smaller steps -
10
Well, my PIP project and hope are returnedHi again, these were my experiences with my second firmware update. This time it was NOT a regular update, because Ossuret/Hipzo firmware was added to the JUNSUN V1 device. I did it because for some inexplicable reason, I really like Launchers that use PIP. And unfortunately, this is not allowed in the JUNSUN V1 firmware.
I read a warning here in the forum about the build.prop file, but in this case it WAS EXACTLY THE SAME in the two firmwares!
So, My device is a JUNSUN V1 Plus: MS94NV UK 9 inch 4G+64G.
Actual (original JUNSUN) firmware:
8667Q军灿UI02-国外-1280x720_v46_20231122.zip-Tan.zip
Target (Tengshi) firmware:
8667Q腾实UI05-国外-1280x720_v53_20230914.zip
Firmware changes:
8667Q军灿UI02-国外-1280x720_v46_20231122 X=1280 Y=720 --> 8667Q腾实UI05-国外-1280x720_v53_20230914 X=1280 Y=720
Result:
The installation went well (Note: the screen was rotated 90 degrees counterclockwise during installation. After the restart, the display was normal), everything works fine. The imported boot logo and the factory settings was remains! I have V1Plus with build in FAN. FAN application and FAN setting (factory menu) is missing. So the FAN is not working!
Surprisingly, everything works fine! The Google maps runs great in the small window and other programs also works very well.
The Carletter version is older, 7.5.8.20230809, but I successfully updated this with version 7.7.3.20231024, which I extracted (using 7-Zip) from the JUNSUN firmware file.
A solved the FAN problem ( in a non-standard way ), but unfortunately I will not publish the method. Because e.g. if any Launcher is installed, it is not possible to reassign the HOME button to Tengshi launcher from then on. And there may be other, not yet experienced, problems. However, the FAN already works and the look of the radio/music player/equalizer is the usual JUNSUN. (Perhaps you can figure out what I did )
Original screens, before my "FAN modification":
View attachment 6061582
View attachment 6061583
View attachment 6061584
View attachment 6061585
Conclusion: this firmware can be used (at your own risk!) with JUNSUN V1, if there is no FAN in it and you want a PIP solution. And if you like this design.
I will definitely use this for a while, I will share the new comments
UPDATE! "Only one day in the paradise". After 24 hour.... The Tengshi firmware on JUNSUN V1 not working correctly! Do not install or if you already installed, removed it!
I brought up the topic again because I found some settings while analyzing the MainUI.
Now I'm using firmware 8667Q军灿UI03-车模--1280x720_v5_20240113.zip, which had to be changed in the MainUI because the open door warning didn't work. Then I wanted to enable the navigation volume control, so I started analyzing the MainUIs in other firmwares.
This is how I saw a few settings with which I started to "play" and modify the v5 MainUI
"support_change_navivolume": the navigation volume control appeared for this, but as it turned out, it does not control anything. I'm still investigating this matter...
"support_freeform_mode", "support_multi_window" (thank you for
bloot ): I enabled these in case it helps with PIP. Note: only the "support_freeform_mode" was enabled in Tengshi firmware.
The result:
base fimware: 8667Q军灿UI03-车模--1280x720_v5_20240113.zip
+ modified v5 MainUI (only for "8667Q军灿UI03-车模--1280x720_v5"!)
+ Tengshi 8667TsLauncher3_ts05_1280x720.apk launcher (from Tengshi v53 firmware. File is attached.)
Now, I have two selectable Launcher: "Launcher" is the orignal JUNSUN and "Launcher3" is the Tengshi launcher.
And now, the hope is returned. This "configuration" is working since three days, without any problem. For the driving, I'm using Magic Earth Navigation (you can see in the picture), because it follows the route. For the navigation, I'm using the built-in Google Maps.
7
Google https://drive.google.com/file/d/1mRJpdPa-sRZzNLGNRcdVf6RNkMYncoC6/view?usp=sharingI'd be happy if you recommend something better
4
Hi, I'm using this app. (use Default Home App Settings menu)
Maybe yes... I will deal with it, because I want to make the side and bottom bars smaller so that the NAVI window can be a little bigger4
Hello and good morning, @Morsartt Welcome to XDA! I hope you'll always get the support you require and have enjoyable times on our platform.
However, as a LAST-time courtesy I've translated your above quoted post. With reference to rule no. 4 of the XDA Forum Rules, please post in English or add at least an English translation to your Polish posts.
Your posts here and here already had to be translated by a moderator. Any further "Polish-only" post will be deleted without further notification. Please read my message as a friendly warning to always follow all rules. Any further violation might lead to more severe consequences to your account.4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ , https://www.babelfish.com/ or https://fanyi.baidu.com/#auto/en or use one of your choice.
Regards
Oswald Boelcke
Senior Moderator4
No that I'm aware of, only thing you can do to avoid it is not changing settings very often in the 8878 menu code
DSP settings resets too. -
13
Hi again, these were my experiences with my third firmware update. (first look)UI is similar than others... I'll try it in the afternoon and write if I see any differences
View attachment 6067526View attachment 6067527
Use Topic swithing app to change UI03 from UI04
So, My device is a JUNSUN V1 Plus: MS94NV UK 9 inch 4G+64G.
Actual (original JUNSUN) firmware:
8667Q军灿UI02-国外-1280x720_v46_20231122.zip-Tan.zip
Target (JUNSUN) firmware:
8667Q军灿UI03-车模--1280x720_v5_20240113.zip
Firmware changes:
8667Q军灿UI02-国外-1280x720_v46_20231122 X=1280 Y=720 --> 8667Q军灿UI03-车模--1280x720_v5_20240113 X=1280 Y=720
Result:
The installation went well (Note: the screen was rotated 90 degrees counterclockwise during installation. After the restart, the display was normal), everything works fine. The imported boot logo and the factory settings was remains! 3rd party apps, pictures, music, etc. are deleted, please make backup before updating !
Everything works fine!
The Carletter version is newer, 7.8.3.20231216 sdk 3.5.2_1124 (v46: 7.7.3.20231024 sdk 3.3.9_0825).
UPDATE: The "open door" picture from the screen center is missing. It seems the CANbus communication is OK, CarInfo and steering wheel butons are working, except the open door picture...
UPDATE2: I modified the v5 MainUI, so if you have v5 and you have problem with the open door warning, you can Download my fix (slow download is cost free), unzip and install the fixed MainUI apk
The main changes: the 360° 3D car view app in UI03!
UI02 v46 screens:
UI03 V5 screens:
WITHOUT 360° 3D car view app activation:
if use click on GEAR icon in the top right corner:
UPDATE3: JUNSUN support published the 3D app activation file: LINK. Copy the cert file to a FAT32 usbstick, insert to HU and click the gear icon. 04/2024: one user reported, this license was expired
WITH 360° 3D Car view app activation (price: 15 USD):
you can drag the car, rotate it, zoom in, etc.
if use click on GEAR icon in the top right corner, 360° 3D app settings:
you can choose from a few cars, you can change car color, you can enter the license plate number
you can buy another car model
LOL: you drive along an animated rainbow road
Morre info after longer use!10
Well, my PIP project and hope are returnedHi again, these were my experiences with my second firmware update. This time it was NOT a regular update, because Ossuret/Hipzo firmware was added to the JUNSUN V1 device. I did it because for some inexplicable reason, I really like Launchers that use PIP. And unfortunately, this is not allowed in the JUNSUN V1 firmware.
I read a warning here in the forum about the build.prop file, but in this case it WAS EXACTLY THE SAME in the two firmwares!
So, My device is a JUNSUN V1 Plus: MS94NV UK 9 inch 4G+64G.
Actual (original JUNSUN) firmware:
8667Q军灿UI02-国外-1280x720_v46_20231122.zip-Tan.zip
Target (Tengshi) firmware:
8667Q腾实UI05-国外-1280x720_v53_20230914.zip
Firmware changes:
8667Q军灿UI02-国外-1280x720_v46_20231122 X=1280 Y=720 --> 8667Q腾实UI05-国外-1280x720_v53_20230914 X=1280 Y=720
Result:
The installation went well (Note: the screen was rotated 90 degrees counterclockwise during installation. After the restart, the display was normal), everything works fine. The imported boot logo and the factory settings was remains! I have V1Plus with build in FAN. FAN application and FAN setting (factory menu) is missing. So the FAN is not working!
Surprisingly, everything works fine! The Google maps runs great in the small window and other programs also works very well.
The Carletter version is older, 7.5.8.20230809, but I successfully updated this with version 7.7.3.20231024, which I extracted (using 7-Zip) from the JUNSUN firmware file.
A solved the FAN problem ( in a non-standard way ), but unfortunately I will not publish the method. Because e.g. if any Launcher is installed, it is not possible to reassign the HOME button to Tengshi launcher from then on. And there may be other, not yet experienced, problems. However, the FAN already works and the look of the radio/music player/equalizer is the usual JUNSUN. (Perhaps you can figure out what I did )
Original screens, before my "FAN modification":
View attachment 6061582
View attachment 6061583
View attachment 6061584
View attachment 6061585
Conclusion: this firmware can be used (at your own risk!) with JUNSUN V1, if there is no FAN in it and you want a PIP solution. And if you like this design.
I will definitely use this for a while, I will share the new comments
UPDATE! "Only one day in the paradise". After 24 hour.... The Tengshi firmware on JUNSUN V1 not working correctly! Do not install or if you already installed, removed it!
I brought up the topic again because I found some settings while analyzing the MainUI.
Now I'm using firmware 8667Q军灿UI03-车模--1280x720_v5_20240113.zip, which had to be changed in the MainUI because the open door warning didn't work. Then I wanted to enable the navigation volume control, so I started analyzing the MainUIs in other firmwares.
This is how I saw a few settings with which I started to "play" and modify the v5 MainUI
"support_change_navivolume": the navigation volume control appeared for this, but as it turned out, it does not control anything. I'm still investigating this matter...
"support_freeform_mode", "support_multi_window" (thank you for
bloot ): I enabled these in case it helps with PIP. Note: only the "support_freeform_mode" was enabled in Tengshi firmware.
The result:
base fimware: 8667Q军灿UI03-车模--1280x720_v5_20240113.zip
+ modified v5 MainUI (only for "8667Q军灿UI03-车模--1280x720_v5"!)
+ Tengshi 8667TsLauncher3_ts05_1280x720.apk launcher (from Tengshi v53 firmware. File is attached.)
Now, I have two selectable Launcher: "Launcher" is the orignal JUNSUN and "Launcher3" is the Tengshi launcher.
And now, the hope is returned. This "configuration" is working since three days, without any problem. For the driving, I'm using Magic Earth Navigation (you can see in the picture), because it follows the route. For the navigation, I'm using the built-in Google Maps.
7
Google https://drive.google.com/file/d/1mRJpdPa-sRZzNLGNRcdVf6RNkMYncoC6/view?usp=sharingI'd be happy if you recommend something better
6
Hi!
Mission accomplished! I got it! The v39! 8667Q军灿UI02-国外-1280x720_v39_20230712.zip
PS: The WeTransfer link will expire in 7 days!4
New posts
-
-
How To Guide [Guideline] Root GT Neo 3 80W (RMX3561) using Magisk- Latest: Binodkumal
