[FIRMWARE][MIUI STABLE][land] For Custom ROMs

Search This thread

shankar_vl

Senior Member
Mar 23, 2016
145
54
Hey, I observed to find data signals going frequently off after flashing the firmware posted on this thread. Seems not compatible as of now.

I had to reflash firmware from MIUI 9 Global beta rom maintained here by @mizdrake7 to restore smooth and quick signal reception.

Anybody experiencing the same with the firmware here, please go here and flash the latest one.
 
Last edited:

NPriyo

Senior Member
May 12, 2015
711
312
Ranaghat
Moto E
Xiaomi Redmi 3S
Do i need to flash firmware because with out one also my system works fine plz help
System doesn't work without firmware. There is always one inside. Check the baseband version. That's the firmware. The actual question is, whether you should to flash a new one or not. That's up to you.

---------- Post added at 09:28 AM ---------- Previous post was at 09:27 AM ----------

Latest China Stable firmware added.
Cheers :)
Would Chinese version work properly on Indian device? I mean, any signal issue or anything?
 

NaYaB786

Senior Member
Nov 24, 2015
846
227

Attachments

  • Screenshot_Chrome_20180202-190828.png
    Screenshot_Chrome_20180202-190828.png
    127.1 KB · Views: 284

Bhabesh98

Senior Member
Apr 30, 2014
472
62
I dont know which one to flash.. someone please tell me
 

Attachments

  • Screenshot_20180202-192119.png
    Screenshot_20180202-192119.png
    101.8 KB · Views: 313

Top Liked Posts

  • There are no posts matching your filters.
  • 53
    You can get latest stable firmware images for land from here. If you are facing Unknown Baseband issue or something like that, then you should flash the latest firmware. If you need any further help, just comment down below.

    NOTE: READ THIS CAREFULLY BEFORE PROCEEDING
    Flash at your own risk and do some research before flashing. I'll not be responsible if anything happens to your device.
    This is only for Redmi 3S/3X/Prime (land). Flashing it on other device may result in Hard Brick

    Baseband Version (Latest):- ***NNS_PACK-1.87716.2.103688.2-V051

    DOWNLOADS​
    GLOBAL STABLE
    👉V9.5.5.0 (2018-05-xx)

    👉V9.5.1.0 (2018-03-xx)
    👉V9.2.2.0 (2018-02-xx)
    👉V8.5.4.0 (2017-10-xx)
    👉V8.5.3.0 (2017-05-10)
    👉V8.1.1.0 (2016-11-23)


    CHINA STABLE
    👉V9.5.3.0 (2018-03-xx)

    👉V9.2.2.0 (2018-02-xx)
    👉V9.2.1.0 (2018-01-xx)


    FLASHING PROCEDURE
    1. Reboot to Recovery.
    2. Select Install and select the firmware zip file which you've downloaded.
    3. Swipe to start flashing and wait untill flashing finishes.
    4. Reboot and Enjoy.

    Thanks to @impulsar for suggesting. :D

    Don't forget to hit Thanks button if you liked it. :)

    XDA:DevDB Information
    MIUI Global/China Stable Firmware, Tool/Utility for the Xiaomi Redmi 3S

    Contributors
    dasshubham762, impulsar, Xiaomi

    Version Information
    Status: Stable

    Created 2017-10-01
    Last Updated 2018-05-17
    8
    Firmware images of MIUI 9.2.2.0 is now added to Downloads list. Check first post.
    3
    Congrats and thanks, a much needed thread :)
    3
    WARNING FOR PEOPLE WITH EDL-UNLOCKED BOOTLOADER !!!!!

    If you have an unoficially unlocked device which was unlocked by flashing bootloader over EDL (by flashing unofficial appsboot which allows "fastboot oem unlock-go") be VERY CAREFUL! This package also updates bootloader and by applying it, the bootloader will be locked again. Additionally this new bootloader version won't allow "fastboot oem edl" to enter EDL mode and the only way to enter it would probably be those two test points on the motherboard.

    This locked bootloader then won't load your custom rom and won't allow you to do "fastboot boot" command to enter (TWRP) recovery.

    I was stupid enough to run official Mi unlock tool and it unlocked this new bootloader, but wiped something (either /data or some secure hw storage storing encryption keys). In the end, my original custom ROM boots but I can't mount my encrypted data partition (the same using TWRP - it behaves like if I entered a wrong password). :'( I have almost everything backed up but a few things were lost by this..

    Looking at the "META-INF/com/google/android/updater-script" in this .zip, removing appsboot lines would skip the update of the bootloader and prevent this problem. Lesson learned - I will always inspect these scripts before flashing any zip over a running system. :p
    3
    Firmware images of MIUI 8.5.4.0 is now added to Downloads list. Check first post.