Firmware Windows Phone 8 on Nokia X2 (Unstable, need more work)

[thinhx2]

Hello, long time no see.
I need help to Windows Phone can run on Nokia X2 -Ara. Today i tested on Nokia x2 prototype F1 RM1014 1 sim
This work high knowledge user, advance user, not for normal,noob or another guy dont know what they doing, need high knowledge.
Request:
A EDL cable to force X2 go to qcom 9008 dload or anothet mehod to force x2 go to qcom dload 9008
Full android backup of you system,back up via DD command or another tool kit. Full emmc image 3.6gb not backup of system,data,.tcc in twrp. full EMMC Backup via Terminal Android is my choise
Have a lot time to download file,restore file,flash file
And dont blame me if it doesnt boot to system
Need installed Thor2 . understand command of Thor2. Need install windows device recovery tool



XDA:DevDB Information
Firmware Windows Phone 8 on Nokia X2 (Unstable, need more work), ROM for the Nokia X2

Contributors
thinhx2
ROM OS Version: Windows 8 Mobile
ROM Kernel: Windows Kernel 1

Version Information
Status: Alpha

Created 2019-07-11
Last Updated 2019-07-29

 

[thinhx2]

Backup full emmc of android by terminal apk:
dd if=/dev/block/mmcblk0 of=/storage/sdcard1/backup.img
Coppy it to pc/laptop to restore android

 

[thinhx2]

Flash Emergency payload of Windows phone:
https://protobetatest.com/downloads/ download lumia emergency payload from this site, extract folder rm1071
Use EDL cable to force x2 go to qcom 9008 dload (for my self)
Open Thor2, type:
thor2 -mode emergency -hexfile "path to ede file" -edfile "path to edp file"
Done you will see in Device Manager,it will show lumia usb connectivity
But no display because it just repartition few partition of WP,but dont worry continue to have full partition of wp. Next post

 

[thinhx2]

Download this file ~4gb : https://drive.google.com/file/d/1kvJzOCaekZLkPNxGYk_ol0LQGUmuGl0M/view

Continue type command in Thor2 : thor2 -mode uefiflash -imagefile [PATH TO THE DOWNLOADED FILE] -startsector 0

Wait. It take you about 33mins ) . after success. Reboot device. You will got WP8.1 on x2. But have big problem : no display driver

 

[thinhx2]

If you flash UEFI from 532/435 you will have display work but after logo windows. Device will reboot,cant go to system. link : https://drive.google.com/file/d/15Gz6IfBPL1LiJcphQbEEVYIqX7uwl1Se/view?usp=sharing

 

[thinhx2]

I tried flash FFU and full emmc backup of 435/532 but same result: after logo Windows. Device will reboot

 

[thinhx2]

I need help to fix problem

 

[thinhx2]

And i think i need try install win rt on it

 

[thinhx2]

And x2 only have 4gb rom. Cant install rt

 

[thinhx2]

and i only try it on x2 prototype. Not x2 retail. Maybe x2 retail have security fuse. But who know. I just try for fun

 

[thinhx2]

dont try if you dont have high knowledge. It really hard. Not easy

 

[thinhx2]

It so fun ???

 

[thinhx2]

Time to sleep,i will update tomorrow. A great nght to play wp with x2 ))

 

[thinhx2]

This work not for normal user. Dont try it if you dont have good knowledge ))

 

[thinhx2]

Uefi mass storage mode work fine on x2

 

[thinhx2]

some one can help me port display driver?

 

[vatva69]

some one can help me port display driver?

can you try copying oempanel.sys and oempanel_etw.dll from 532\MainOS.img\Windows\system32\DRIVERS\ to vela and flashing ??

 

[thinhx2]

can you try copying oempanel.sys and oempanel_etw.dll from 532\MainOS.img\Windows\system32\DRIVERS\ to vela and flashing ??

Problem from Display config of Uefi. Uefi of 532 can enable display of 2 fw

 

[vatva69]

Problem from Display config of Uefi. Uefi of 532 can enable display of 2 fw

Ok, can you copy uefi config from 532?

 

[thinhx2]

can you try copying oempanel.sys and oempanel_etw.dll from 532\MainOS.img\Windows\system32\DRIVERS\ to vela and flashing ??

You living in Hanoi? Can tell me you address?. I living at Vinhome riverside