[Firmware] Xperia S - Stock SG-Generic - 6.0.A.3.73 {1257-6921}

Status
Not open for further replies.

LiveSquare

Senior Member
Aug 26, 2010
1,684
342
0
Singapore
I just packed up .73 Generic Singapore to an FTF, and Korumera was kind enough to host it in XDA Servers.

Download from: http://xdafileserver.nl/Sony (Ericsson)/

Filename: LT26i_6.0.A.3.73_SG_Generic.ftf
MD5: 9a58329f9d60ed7538d7c7ef9489e90e
Size: 498 MB (523,206,656 bytes)

NO ROOT REQUIRED, NO BOOTLOADER UNLOCK REQUIRED, WILL NOT VOID WARRANTY

You can flash this without losing any data!
If you uncheck the "wipe userdata" box in Flashtool before flashing, you will not lose any data. You can convert from any customization to this one without any problems!

To flash this, follow the following steps:

  1. For starters, make sure you have Flashtool installed. If you have issues with Flashtool, make sure you also have PC Companion or Sony Update Service installed.
  2. Download the .ftf file to your computer and place it in the Flashtool\Firmwares folder.
  3. Open Flashtool and click the lightning bolt in the menu bar.
  4. Select Flashmode and click OK
  5. Select the right firmware in the left column (LT26i_6.0.A.3.73_SG_Generic.ftf).
  6. Check or uncheck "Wipe User Data". If selected, all user data will be deleted. If you want to update or change customization without losing data, uncheck it.
  7. Click OK and wait for the instruction to unplug the device, ...
  8. Turn your phone OFF, and plug it in while keeping the volume down button pressed.
  9. Follow the steps in the main window of Flashtool, wait until the flashing is done.

I've tested this on my device and works fine.

Note: I'm providing this as it is and I'm not responsible if something goes wrong! Flash it at your own risk!!
 
Last edited:

kazuni

Senior Member
Aug 28, 2007
680
213
0
Hong Kong
Hi LiveSquare, you just beated me in posting this for about 30 minutes :)

Would you be doing root for this build? If not I can post the prerooted image.

--

On the side note, this version of the rom includes all three IME methods (English, Chinese and Japanese).
It also has the following bundles:
-Foursquare
-Xperia Football Downloads
-ShowNearBy
-WisePilot
-McAfee Security
-NeoReader
-MediaRemote
-Explore
-appXtra
 
Last edited:

LiveSquare

Senior Member
Aug 26, 2010
1,684
342
0
Singapore
Hi LiveSquare, you just beated me in posting this for about 30 minutes :)

Would you be doing root for this build? If not I can post the prerooted image.

--

On the side note, this version of the rom includes all three IME methods (English, Chinese and Japanese).
It also has the following bundles:
-Foursquare
-Xperia Football Downloads
-ShowNearBy
-WisePilot
-McAfee Security
-NeoReader
-MediaRemote
-Explore
-appXtra
Nope. I'm not that advanced yet :D.
Please feel free to build the pre-rooted image.

May be you can send me a guide via PM ;).
 

kazuni

Senior Member
Aug 28, 2007
680
213
0
Hong Kong
Can anyone upload build.prop of this Rom? Or copy the text here?

Thanks

Sent from my LT26i using xda premium
I'm too lazy to make a file :p

Code:
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Tue Feb 28 18:06:46 2012
ro.build.date.utc=1330420006
ro.build.user=
ro.build.host=

##### Final patch of properties #####
ro.build.product=LT26i
ro.build.description=LT26i-user 2.3.7 6.0.A.3.73 tvP_zw test-keys

ro.product.brand=SEMC
ro.product.name=LT26i_1257-6921
ro.product.device=LT26i
ro.build.tags=release-keys
ro.build.fingerprint=SEMC/LT26i_1257-6921/LT26i:2.3.7/6.0.A.3.73/tvP_zw:user/release-keys


      ######################## Customized property values #########################
      
ro.semc.version.cust=1257-6921
ro.semc.version.cust_revision=R7E
persist.ro.ril.sms_sync_sending=1
ro.nfc.se.default=SIM
ro.nfc.se.sim.enable=true
      #########################################################################
      

ro.config.ringtone=xperia.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.semc.content.number=PA3

################# Updating of the SW Version #################
ro.semc.version.fs_revision=6.0.A.3.73
ro.build.id=6.0.A.3.73
ro.build.display.id=6.0.A.3.73

##### Values from product package metadata #####
ro.semc.product.model=LT26i
ro.semc.ms_type_id=AAD-3880120-AV
ro.semc.version.fs=WORLD
ro.semc.product.name=Xperia S
ro.semc.product.device=LT26
ro.product.model=LT26i

# begin build properties
# autogenerated by buildinfo.sh
ro.build.version.incremental=tvP_zw
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.type=user
ro.product.board=MSM8660_SURF
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony Ericsson
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
# end build properties
#
# system.prop for surf
#

# Notify the system that the RIL only signals once
ro.telephony.call_ring.multiple=false

rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1

wifi.interface=wlan0
wifi.supplicant_scan_interval=15

ro.semc.sols.product-code=97
ro.semc.sols.company-code=5

#
# system props for the cne module
#
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.be.ge.sqi.min=0
persist.cne.be.ge.sqi.max=100
persist.cne.be.umts.sqi.min=0
persist.cne.be.umts.sqi.max=100
persist.cne.be.hspa.sqi.min=0
persist.cne.be.hspa.sqi.max=100
persist.cne.be.1x.sqi.min=0
persist.cne.be.1x.sqi.max=100
persist.cne.be.do.sqi.min=0
persist.cne.be.do.sqi.max=100
persist.cne.be.wlan.sqi.min=0
persist.cne.be.wlan.sqi.max=100
ro.hdmi.enable=true
lpa.decode=false

#system props for the MM modules

media.stagefright.enable-player=true
media.stagefright.enable-http=true

#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=3

#system props for time-services
persist.timed.enable=true

# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false

#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072

# NFC
ro.nfc.port=I2C
ro.nfc.on.default=false
ro.nfc.se.smx.enable=false

# system props for Battery test in Service menu
ro.semc.batt.capacity=1500
ro.semc.batt.test.z_threshold=50
ro.semc.batt.test.min_level=70

# prop to indicate what kind of external memory the product have.
ro.semc.product.user_storage=emmc_only
ro.build.characteristics=nosdcard

#Default values/Locales for the hiding languages feature
ro.product.locale.excluded=ar_EG ar_IL fa_IR iw_IL

#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
ro.com.google.gmsversion=2.3_r9
ro.setupwizard.mode=DISABLED
ro.com.google.clientidbase=android-sonyericsson
ro.sf.lcd_density=320
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.semc.xloud.supported=true
ro.com.google.clientidbase=android-sonyericsson
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.sf.lcd_density=320
dalvik.vm.heapsize=32m
ro.sf.lcd_density=320
dalvik.vm.heapsize=48m
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.drm.active.num=4
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
 
  • Like
Reactions: Soheil_rf

Noxis

Senior Member
Feb 7, 2006
82
2
0
Erm. Flashtool failed on "system" CRC check or something. My phone disconnected from USB and now all it says is "Sony" on the screen. Tried the volume up + power reboot cycle but it just now says "Sony" all the time.

Any tips?

Edit:

Here it is..

31/057/2012 22:57:03 - INFO - Flashing system.sin
31/057/2012 22:57:08 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0009";ERR_DYNAMIC="Block verification failed";

Tried to flash Generic UK version 3.67 and got the same error. Tried to flash without System it completes fine but I get the same boot problem. Halp!

Edit2: Rebooted my PC and tried again, worked first time! Weird...
 
Last edited:

gm007

Senior Member
May 29, 2011
7,816
4,494
253
Erm. Flashtool failed on "system" CRC check or something. My phone disconnected from USB and now all it says is "Sony" on the screen. Tried the volume up + power reboot cycle but it just now says "Sony" all the time.

Any tips?

Edit:

Here it is..

31/057/2012 22:57:03 - INFO - Flashing system.sin
31/057/2012 22:57:08 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0009";ERR_DYNAMIC="Block verification failed";

Tried to flash Generic UK version 3.67 and got the same error. Tried to flash without System it completes fine but I get the same boot problem. Halp!

Edit2: Rebooted my PC and tried again, worked first time! Weird...
Maybe download the ftf file again or try Lebanon customization firmware 73
 

kazuni

Senior Member
Aug 28, 2007
680
213
0
Hong Kong
Erm. Flashtool failed on "system" CRC check or something. My phone disconnected from USB and now all it says is "Sony" on the screen. Tried the volume up + power reboot cycle but it just now says "Sony" all the time.

Any tips?

Edit:

Here it is..

31/057/2012 22:57:03 - INFO - Flashing system.sin
31/057/2012 22:57:08 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0009";ERR_DYNAMIC="Block verification failed";

Tried to flash Generic UK version 3.67 and got the same error. Tried to flash without System it completes fine but I get the same boot problem. Halp!

Edit2: Rebooted my PC and tried again, worked first time! Weird...
Android USB drivers + adb is well known for giving problems in flashing ... :D
 

hpsauce37

Senior Member
Sep 10, 2010
971
62
48
i have put the file (which it says is 15mb?) into the flashtools firmware folder (same place i put the .67 update) but when i load up flashtools and select the lighting bolt nothing appears there. What am i doing wrong?

thanks

---------- Post added at 09:50 AM ---------- Previous post was at 09:49 AM ----------

i think there must have been a problem with the download as the file should be like 499mb so going to dry and download again.
 
Status
Not open for further replies.