[Firmware] ZTE AXON 10 Pro CH/EU EDL-SD Firmware & Firehose

[Mart Son]

https://yadi.sk/d/TZi3pDOPO8DoKg
Best regards, Dmitry

Downloading now and finger crossed that it will work.

Thanks, Buddy!

P.s.: it worked!

 

[mikelsantanen]

hi guys!

I have received a few days ago the version 1.8 EU. I had previously the 1.5
The 1.8 has the September security patch and a few enhances.

DO you need that i dump my OTA?

 

[EMSpilot]

Model Phone

Downloading now and finger crossed that it will work.

Thanks, Buddy!

P.s.: it worked!

Which model phone did you you flash this on?
Thanks

 

[Mart Son]

Which model phone did you you flash this on?
Thanks

A2020G

 

[rabunz1105]

Hello,
I have a A2020 pro chinese version stuck on bootloader screen (unlocked) will not boot to recovery or twrp recovery (bootloops) edl mode is possible. Does any one have edl chinese software

 

[EDIIIZ]

Hello,
I have a A2020 pro chinese version stuck on bootloader screen (unlocked) will not boot to recovery or twrp recovery (bootloops) edl mode is possible. Does any one have edl chinese software

Try this:
https://www.androidfilehost.com/?fid=6006931924117884049

or this(most recent):
https://www.androidfilehost.com/?fid=4349826312261610710

 

[rabunz1105]

Try this:
https://www.androidfilehost.com/?fid=6006931924117884049

or this(most recent):
https://www.androidfilehost.com/?fid=4349826312261610710

Appreciate it, will give it a go.

 

[scionoics]

Hello,
I have a A2020 pro chinese version stuck on bootloader screen (unlocked) will not boot to recovery or twrp recovery (bootloops) edl mode is possible. Does any one have edl chinese software

I am having this same issue

 

[jim262]

I am having this same issue

Using the EDL flash tool doesn't wipe the disk and if there is a possible corrupt boot partition, it does not fully erase and merely overwrites what is currently there. I successfully used the EDL image to restore my Chinese rom using the Xiaomi MiFlash tool and selecting the clean all button in the lower right corner prior to starting the flash.

 

[ChrisFeiveel84]

Well, dear forum users!
The bootloader is unlocked !!!
Ruth received, though it is necessary to work on it, tel. After the root it works halfway!
SHORT MOVING Slowly
Best regards, Dmitry
https://yadi.sk/i/s4tb9SByApjZ4Q

---------- Post added at 05:17 PM ---------- Previous post was at 04:30 PM ----------

All Guys root full

Hey wool questions if you can build an EDL pack together with which you can then make his EU Axon 10 4G to the Axon 10 4G China

 

[jim262]

Hey wool questions if you can build an EDL pack together with which you can then make his EU Axon 10 4G to the Axon 10 4G China

You can already do this using Xiaomi MiFlaah tool. I used it to go from CN to EU rom.

 

[ChrisFeiveel84]

I would like to make the eu axon the China axon and for that I need an all backup of the China edl tool so that I can flash the partitions layout of the China axon on the german axon 10 (the eu axon has a system partition of 3.4gb) China axon has a syetem partition of 4gb) so i can not flash the system of china firmware on the eu device without the partitions from a China axon..

and I have no edl firmware from China axon.


What you mean is from China Axon to the EU Axon flashing but I want to be exactly about Rule from EU to China and is missing for an EDL Packet with the partitions of China Axon (gives only the EDL of Dimkin76 with which one can flash the China ACON of EU can be used to use to be able to revive his axon after a break?

 

[jim262]

I would like to make the eu axon the China axon and for that I need an all backup of the China edl tool so that I can flash the partitions layout of the China axon on the german axon 10 (the eu axon has a system partition of 3.4gb) China axon has a syetem partition of 4gb) so i can not flash the system of china firmware on the eu device without the partitions from a China axon..

and I have no edl firmware from China axon.


What you mean is from China Axon to the EU Axon flashing but I want to be exactly about Rule from EU to China and is missing for an EDL Packet with the partitions of China Axon (gives only the EDL of Dimkin76 with which one can flash the China ACON of EU can be used to use to be able to revive his axon after a break?

The Chinese EDL software can be found in this forum, that's where I found it.

 

[ChrisFeiveel84]

I know but I need to make the German axon to a China Axon not only the China edl Tool but a edl firmware pack

 

[jim262]

I know but I need to make the German axon to a China Axon not only the China edl Tool but a edl firmware pack

This isn't a link to the EDL tool, but to CN EDL firmware. Surprised you couldn't find it.
https://androidfilehost.com/?fid=4349826312261610710

 

[dimkin_76]

This isn't a link to the EDL tool, but to CN EDL firmware. Surprised you couldn't find it.
https://androidfilehost.com/?fid=4349826312261610710

This is not the correct firmware under edl
With Respect Dmitry
P.S. I understood about than says a Respected Chris Axon 7, firmware assembled, even sewn quietly,but not loaded, need to to change partitions memory fully,and this very dangerously,erased all imei and so on,We with a Respected Djkuz already discussed this subject

 

[flymetothemoon]

Can someone please extract the GEN_EU_EEA_A2020G_Pro_V2.3 from his device? OTA does not work for me.

 

[dimkin_76]

Guys we take the Android 10 firmware to raise the brick and just the EU 2.3 firmware
https://yadi.sk/d/RVDDuetDwIEmsQ

 

[dimkin_76]

Guys who have an American version of the device, please merge backup FULL

 

[le011]

Chines 10 edl version

Hi all
can anyone upload edl image of the Android 10 edl ?

ty all