Recently while updating my Kindle Fire HD 7, my device went into a bootloop where it would boot into TWRP and the TWRP logo kept blinking, I live at a place where it is impossible to procure a factory cable. After numerous failed attempts on making one myself i gave up on factory cables. I however wasn't satisfied enough by my failures so i went the hard way and out of curiosity connected my Kindle to my Laptop and did an ADB device lookup. VOILA ! It was there but now i was wondering how to get it into the fastboot mode from there. After crashing my head several times and punching a few commands my device booted into the orange heaven for a hacker. "The FASTBOOT Mode." So if you are in the same situation i hope this guide will be able to help you unbrick your device.
Steps:
1. Power on your device until the dreadful TWRP LOGO starts flashing.
2. Connect your kindle with your PC.
3. Type in "adb devices" and check if your device is available.
4. If your device shows up in ADB Devices List, Proceed to the next step.
5. Type in "adb reboot bootloader"
6. Now the device will boot into the fastboot mode.
7. Download TWRP from here
8. cd to the folder where your twrp image has been downloaded and type "fastboot -i 0x1949 flash recovery kfhd7-twrp-2.8.7.0-recovery.img" to flash it
Steps:
1. Power on your device until the dreadful TWRP LOGO starts flashing.
2. Connect your kindle with your PC.
3. Type in "adb devices" and check if your device is available.
4. If your device shows up in ADB Devices List, Proceed to the next step.
5. Type in "adb reboot bootloader"
6. Now the device will boot into the fastboot mode.
7. Download TWRP from here
8. cd to the folder where your twrp image has been downloaded and type "fastboot -i 0x1949 flash recovery kfhd7-twrp-2.8.7.0-recovery.img" to flash it
Last edited: