• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Flash/update files for TCL ES560/S6500/S5300

Search This thread

Tbo29

Member
Dec 4, 2020
13
4
Samsung Galaxy Tab A series
Should be in English in this Forum. Could be an CRC error in the zip file when you downloaded. Try to redownload it.

Potrebbe essere il file zip corrotto. Prova di scaricarlo di nuovo. Da me ha fatto l'aggiornamento dalla 369 alla 374 senza problemi.

Hai scaricato OTA o lo zip con IMG? Le procedure per aggiornare il firmware sono differenti. Guarda dentro il zip. Se c'e solo un file con estensione .img non è OTA. Nello zip con OTA ci sono 16 file e 2 cartelle. Quello puoi aggiornare via "Local Update".
 
Last edited:

stasiof

Senior Member
Oct 9, 2013
1,705
650
Last edited:
  • Like
Reactions: asiliem

tuccio

Senior Member
Jul 26, 2015
71
0
catania
Redmi Note 8 Pro
Should be in English in this Forum. Could be an CRC error in the zip file when you downloaded. Try to redownload it.

Potrebbe essere il file zip corrotto. Prova di scaricarlo di nuovo. Da me ha fatto l'aggiornamento dalla 369 alla 374 senza problemi.

Hai scaricato OTA o lo zip con IMG? Le procedure per aggiornare il firmware sono differenti. Guarda dentro il zip. Se c'e solo un file con estensione .img non è OTA. Nello zip con OTA ci sono 16 file e 2 cartelle. Quello puoi aggiornare via "Local Update".
Image file. From the TCL Italia website. Can you tell me how to update? I updated other times, actually this should be a downgrade, but if it goes better than the last update I would like to install it
 

negmatoff

New member
Oct 16, 2021
1
0
Hi all! Please help.
After updating the firmware automatically, s65A TV started rebooting automatically and gives error "No command". I've tried installing other firmware, after finishing the installation, the TV reboots and starts the installation process again. I waited for several hours, the re-installation process did not stop. After another installation cycle I turned off the TV. After a few hours I turned it on, it started up, I thought the problem was solved, but after a few minutes it turned off again and the message "No command" appeared. Who has encountered this problem? How to fix it?
 

Tbo29

Member
Dec 4, 2020
13
4
Samsung Galaxy Tab A series
Hi all! Please help.
After updating the firmware automatically, s65A TV started rebooting automatically and gives error "No command". I've tried installing other firmware, after finishing the installation, the TV reboots and starts the installation process again. I waited for several hours, the re-installation process did not stop. After another installation cycle I turned off the TV. After a few hours I turned it on, it started up, I thought the problem was solved, but after a few minutes it turned off again and the message "No command" appeared. Who has encountered this problem? How to fix it?
Read this

and this
 

marchelo64

New member
Dec 24, 2011
2
1
Quito
  • Like
Reactions: Jorge Tobar Acevedo

matheuscouto

New member
Nov 27, 2021
1
0
TCL 43S6500S was on booting loop, I've tried a couple images via USB but every time is stops during the installation with the following message:

System update failed, please try again.

Has anyone experienced something similar, if so, how did you guys solved it.
 

Specy01

Member
Jul 12, 2015
9
0
Questo è un elenco di pacchetti di aggiornamento e immagini di installazione per TCL ES560/S6500/S5300, chassis RT41.
Se non sei sicuro che il tuo TCL TV sia chassis RT41 o meno, puoi verificarlo in Impostazioni > Informazioni > Contattaci menu. Se la tua versione del software inizia con V8-R41KT01-LF1 , puoi procedere con l'installazione. SE NON HAI UN TELAIO RT41, L'INSTALLAZIONE FALLISCE .
Esistono due tipi di pacchetti per questa TV, pacchetti in modalità download e pacchetti Android OTA. I pacchetti in modalità download cancelleranno i tuoi dati, mentre i pacchetti Android OTA conserveranno i tuoi dati.

Pacchetti OTA Android:
Versione 190 .
Versione 234 .
Versione 241 .
Versione 272 .
Versione 305 .
Versione 353 .
Versione 360 .
Versione 364 .
Versione 367 .
Dopo aver scaricato il pacchetto, leggere il manuale incluso (soprattutto se si desidera aggiornare ad Android 9).

Pacchetti in modalità download:
Versione 064 .
Versione 076 .
Versione 080 .
Versione 114 .
Versione 117 .
Versione 133 .
Versione 138 .
Versione 139 .
Versione 144 .
Versione 155 .
Versione 180 .
Versione 216 .
Versione 226 .
Versione 229 .
Versione 234 .
Versione 241 .
Versione 242 .
Versione 243 .
Versione 245 .
Versione 250 . (Declassato kernel.)
Versione 255 .
Versione 257 .
Versione 272 .
Versione 284 .
Versione 292 .
Versione 305 .
Versione 343 .
Versione 364 .
Pacchetti in modalità download rooted:
Versione 289 .
Versione 353 .
Versione 361 .
Questi pacchetti hanno un file Update.img . Copia il file immagine nella radice dell'unità USB, collega l'unità USB alla TV, quindi avvia la TV in modalità download.

Come si avvia in modalità download ?
1) Tenere premuto il pulsante di accensione sul telecomando finché non viene visualizzato il menu di spegnimento.
2) Selezionare per spegnere il televisore.
3) Quando il LED di alimentazione si spegne, tenere premuto il pulsante di accensione del televisore.
4) Quando il LED di alimentazione inizia a lampeggiare, rilasciare il pulsante di accensione.
Un altro modo per avviare la modalità download è scollegare il cavo di alimentazione del televisore, quindi tenere premuto il pulsante di accensione del televisore mentre si ricollega il cavo di alimentazione. Quando il LED di alimentazione inizia a lampeggiare, rilasciare il pulsante di accensione.
La TV dovrebbe avviarsi in modalità download e iniziare il processo di installazione. NON SPEGNERE LA TV DURANTE IL PROCESSO DI INSTALLAZIONE
My TCL 32S615X1 does'nt have the physical power button, so I don't know how put the tv in download mode. Can anyone help me please? Thanks you.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    hi i'm new to this, i just bought a TCL S6500 and immediately upgrade to v325, do you recommend any new version?
    Read last 3-4 pages, you will know...
    Latest OTA zip file V374
    Latest IMG file V378.
    1
    desculpe, mas tentei enviar o arquivo duas vezes, mas não entendi, não consigo enviar para você



    scusa ma ho provato due volte a mandarti il file ma non ho capito non riesco a mandartelo
    estrange; I received nothing; but thanks for trying;
  • 11
    This is a list of update packages and installation images for TCL ES560/S6500/S5300, chassis RT41.
    If you're unsure whether your TCL TV is chassis RT41 or not, you may check it in Settings > About > Contact us menu. If your Software version starts with V8-R41KT01-LF1, you may proceed with the installation. IF YOU DO NOT HAVE A RT41 CHASSIS, THE INSTALLATION WILL FAIL.
    There are two kinds of packages for this TV, download mode packages and Android OTA packages. Download mode packages will erase your data, while Android OTA packages will keep your data.

    Android OTA packages:
    Version 190.
    Version 234.
    Version 241.
    Version 272.
    Version 305.
    Version 353.
    Version 360.
    Version 364.
    Version 367.
    After downloading the package, please, do read the manual included (especially if you want to update to Android 9).

    Download mode packages:
    Version 064.
    Version 076.
    Version 080.
    Version 114.
    Version 117.
    Version 133.
    Version 138.
    Version 139.
    Version 144.
    Version 155.
    Version 180.
    Version 216.
    Version 226.
    Version 229.
    Version 234.
    Version 241.
    Version 242.
    Version 243.
    Version 245.
    Version 250. (Downgraded kernel.)
    Version 255.
    Version 257.
    Version 272.
    Version 284.
    Version 292.
    Version 305.
    Version 343.
    Version 364.
    Rooted download mode packages:
    Version 289.
    Version 353.
    Version 361.
    These packages have an Update.img file. Copy the image file to the root of your USB drive, plug the USB drive into the TV, then boot the TV into download mode.

    How do I boot into download mode?
    1) Hold the power button on the remote control until the power off menu is shown.
    2) Select Yes to turn off the TV.
    3) When the power LED turns off, press and hold the TV's power button.
    4) When the power LED begins to blink, release the power button.
    Another way to boot into download mode is to unplug the TV's power cord, then hold the TV's power button while plugging the power cord back. When the power LED begins to blink, release the power button.
    The TV should boot into download mode and begin the installation process. DO NOT POWER OFF THE TV DURING THE INSTALLATION PROCESS!
    3
    Replying to myself. I installed the version V8-R41KT01-LFIV369 build 009199 mentioned here. Much better than than the one which came originally with the TV. Also nice is that you now have the option to format an USB drive as internal storage which I could do only with some adb commands before.

    Speed is indeed much better than I had with 336. Also now some apps which didn't work properly now are working fine (especially VPN's). It's a pitty that these models won't receive the Google TV upgrade. I have it on another model, much better and with a nice speed increase.
    3
    Were you able to do it? I have a rca that is the same too. Tell me about your experience, please, thank you!

    I tried both the OTA and the full firmware install and both installed without a single issue, even the TV started with the "Hitachi" logo and everything so it went just like an official update, the latest firmware (v255) that some user posted here didn't gave me any issues at all, I could even say that it runs better than the original, and they improved some image settings related options, so go for it, if the chasis model number match shouldn't be a problem then, the system checks anyway if the firmware it's valid for installation.
    3
    V8-R41KT01-LF1V374.009210 IMG

    V374 IMG



    build date= Jan 25 2020
    build= 1611534792
    security_patch= 2020-12-01
    gmsversion= Android_9_Pie
    product.build.fingerprint= TCL/UnionTV/UnionTV:9/PPR2.180905.006.A1/builder.20210125.083312:user/release-keys
    IMG size= 2.09GB
    bootloader date= Jun 23 2021
    Revision: 009210

    Changelog:
    2021-11-29-210346.png
    2
    i have a TCL 40ES560, does chromecast built-in works with tv in standby for any of you? It never worked for me, tried every firmware, I have the option for network standby, fast turn on, everything seems set up as it should, but as soon as I turn the tv to standby it is no longer usable to cast to.. I have another Android TV from sony in my living room and it never had this problem