Battery life seems to be good on this rom. Lost only 3% overnight(8hrs)
Sent from my MB526 using Tapatalk
Sent from my MB526 using Tapatalk
[FLASH_SBF] 2.3.4 для Defy - 134
- Thread starter hobbit19
- Start date
SetVsel works for me without milestone overclock. Only 2ndinit + overclock enabled.
Now: 300Mhz @ 20, 600Mhz @ 30, 800Mhz @ 38, 1000Mhz @ 48
Now: 300Mhz @ 20, 600Mhz @ 30, 800Mhz @ 38, 1000Mhz @ 48
Setvsel resets my device. How did you do it?
Sent from my MB526 using XDA App
Sent from my MB526 using XDA App
enable overclock in bootmenu and save.
Can I install 2nd init recovery on this ROM? I have installed your nand + sbf. If yes, which version?
p.s. I have never installed 2nd init before, so I am a newbie.
Last edited:
I already have CWM installed. So, I should remove CWM, and install 2ndinit?
shouldn't be.. resetting battery stats (in custom recovery) might solve the problem.
True, after 7 hours I'm on 75%, and for me it's good, better then 2.3.3.
This is a fantastic ROM! I can only say that I am very surprised to see this kind of quality interface coming from MOTO. Anyway, to help those who're new to this, I've written a somewhat comprehensive installation guide below.
Preparation
1. Firstly, you’re going to need all these files
3. Follow instructions at the Superoneclick thread to root your Defy
4. Follow instructions at the ClockworkMod Recovery thread to install System Recovery into your Defy
5. Launch System Recovery and install Recovery System
6. Perform Recovery Boot (USB debugging MUST BE TURNED OFF in your Defy. It’s located under Settings – Applications - Development)
7. Create a nandroid backup of your current system by scrolling to “Backup & Restore” using VOL UP/DOWN key, and POWER button to execute (this is so that you can return revert back to your official ROM for warranty purposes)
8. Reboot normally
9. Extract the rooted nandroid backup + fixed sbf file you downloaded earlier. The filename should be “shadow4.5.1-134rootednandroid.zip”. You should see 2 folders “fixed-sbf” and “nandroid backuo”
10. Copy the “shadow4.5.1-134nandroid” folder (not just files, but the whole folder) to your SD card under “\goapkrev\backup”. So you should have “\goapkrev\backup\shadow4.5.1-134nandroid” in your SD card.
Actual Flashing Process
1. Launch System Recovery and perform a Recovery Boot (USB debugging MUST BE TURNED OFF in your DEFY. It’s located under Settings > Applications > Development)
2. At the bootmenu, use the VOL UP/DOWN key to move through the boot menu and perform a full wipe (Wipe DATA/Factory reset & Wipe CACHE Partition)
3. After both wipes are complete, go to “Backup & Restore” > “Restore” > “Advanced Restore” and you should see 2 items. Your earlier backup as well as the folder you put in earlier “shadow4.5.1-134nandroid”.
4. Select “shadow4.5.1-134nandroid” and choose “System Only”
5. After the restoration is complete, choose “Reboot System”, and IMMEDIATELY hold down the VOL UP key.
6. This will put you in bootloader mode.
7. Launch RSD Lite on your PC, and connect your DEFY to your PC
8. Let the appropriate driver installations take place
9. Select the fixed sbf file from the “fixed-sbf” folder. The filename should be “shadow4.5.1-134fixed.sbf” and Flash your DEFY
10. Be aware of the flashing progress. It’s very fast.
11. As soon as you see your device reboot, IMMEDIATELY hold down the VOL DOWN key.
12. This will bring you to stock recovery. Press both VOL UP and VOL DOWN key simultaneously to see the boot menu. Select items with the VOL UP/DOWN key, and POWER button to execute.
13. Perform a full wipe (wipe data/factory reset & wipe cache partition)
14. After both wipes are complete, hit “reboot system now”
15. Once your device completes the normal boot up process, RSD Lite should show the “PASS” status. Close RSD Lite and unplug your DEFY from your PC.
16. Enjoy!
DISCLAIMER
Use this guide at your own risk. I will not be responsible for you bricking your Defy.
Preparation
1. Firstly, you’re going to need all these files
a. Rooted-nandroid-backup + fixed sbf from http://www.multiupload.com/SPZ8SIEC60
b. Superoneclick from http://forum.xda-developers.com/showthread.php?t=803682
c. Defy ClockworkMod Recovery from http://forum.xda-developers.com/showthread.php?t=875233
d. Latest RSD Lite and Drivers from http://forum.xda-developers.com/showthread.php?t=1100585
2. Install the RSD Lite and appropriate drivers into your PC (32-bit or 64-bit)b. Superoneclick from http://forum.xda-developers.com/showthread.php?t=803682
c. Defy ClockworkMod Recovery from http://forum.xda-developers.com/showthread.php?t=875233
d. Latest RSD Lite and Drivers from http://forum.xda-developers.com/showthread.php?t=1100585
3. Follow instructions at the Superoneclick thread to root your Defy
4. Follow instructions at the ClockworkMod Recovery thread to install System Recovery into your Defy
5. Launch System Recovery and install Recovery System
6. Perform Recovery Boot (USB debugging MUST BE TURNED OFF in your Defy. It’s located under Settings – Applications - Development)
7. Create a nandroid backup of your current system by scrolling to “Backup & Restore” using VOL UP/DOWN key, and POWER button to execute (this is so that you can return revert back to your official ROM for warranty purposes)
8. Reboot normally
9. Extract the rooted nandroid backup + fixed sbf file you downloaded earlier. The filename should be “shadow4.5.1-134rootednandroid.zip”. You should see 2 folders “fixed-sbf” and “nandroid backuo”
10. Copy the “shadow4.5.1-134nandroid” folder (not just files, but the whole folder) to your SD card under “\goapkrev\backup”. So you should have “\goapkrev\backup\shadow4.5.1-134nandroid” in your SD card.
Actual Flashing Process
1. Launch System Recovery and perform a Recovery Boot (USB debugging MUST BE TURNED OFF in your DEFY. It’s located under Settings > Applications > Development)
2. At the bootmenu, use the VOL UP/DOWN key to move through the boot menu and perform a full wipe (Wipe DATA/Factory reset & Wipe CACHE Partition)
3. After both wipes are complete, go to “Backup & Restore” > “Restore” > “Advanced Restore” and you should see 2 items. Your earlier backup as well as the folder you put in earlier “shadow4.5.1-134nandroid”.
4. Select “shadow4.5.1-134nandroid” and choose “System Only”
5. After the restoration is complete, choose “Reboot System”, and IMMEDIATELY hold down the VOL UP key.
6. This will put you in bootloader mode.
7. Launch RSD Lite on your PC, and connect your DEFY to your PC
8. Let the appropriate driver installations take place
9. Select the fixed sbf file from the “fixed-sbf” folder. The filename should be “shadow4.5.1-134fixed.sbf” and Flash your DEFY
10. Be aware of the flashing progress. It’s very fast.
11. As soon as you see your device reboot, IMMEDIATELY hold down the VOL DOWN key.
12. This will bring you to stock recovery. Press both VOL UP and VOL DOWN key simultaneously to see the boot menu. Select items with the VOL UP/DOWN key, and POWER button to execute.
13. Perform a full wipe (wipe data/factory reset & wipe cache partition)
14. After both wipes are complete, hit “reboot system now”
15. Once your device completes the normal boot up process, RSD Lite should show the “PASS” status. Close RSD Lite and unplug your DEFY from your PC.
16. Enjoy!
DISCLAIMER
Use this guide at your own risk. I will not be responsible for you bricking your Defy.
Last edited:
I've just installed it!
It works fine
.
I've only one problem: in the pictures i've attached, you can see in the top left corner ( first picture ) a red icon showing 2 arrows...
I won't disappear unless i enable mobile data ( and i don't want )!
What can i do?!
It works fine
.I've only one problem: in the pictures i've attached, you can see in the top left corner ( first picture ) a red icon showing 2 arrows...
I won't disappear unless i enable mobile data ( and i don't want )!
What can i do?!
Attachments
Last edited:
This is no problem. Same function can find in Android 2.1 builds.I've just installed it!
It works fine
I've only one problem: in the pictures i've attached, you can see in the top left corner ( first picture ) a red icon showing 2 arrows...
I won't disappear unless i enable mobile data!
What can i do?!
Great tutorial... Now the only thing we need is a tutorial to go back to froyo and everyone should try this ROM... Anyone?
Anyone?
If you are still keeping ( and want to keep ) downgrade ability to Eclair ( 2.1 ):Great tutorial... Now the only thing we need is a tutorial to go back to froyo and everyone should try this ROM...
Get a nandroid backup of froyo + fixed sbf of froyo rom and follow the same guide above here ( of course, you have to use froyo files instead of those linked in the guide )
Otherwise, see below.
Last edited:
I already have Official Froyo... so if i want to come back to official froyo i only have to flash full sbf... or restore my nandroid backup... Or both are valid?
You can flash a full froyo sbf to have a clean froyo.
You can flash a fixed froyo sbf + nandroid backup to have your system restored.
You can flash a full froyo sbf + nandroid backup to have your system restored.
All above will work.
You can flash a fixed froyo sbf + nandroid backup to have your system restored.
You can flash a full froyo sbf + nandroid backup to have your system restored.
All above will work.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone