Flashing tutorial for dummies [ICS SGS TEAM ROM]

psyqiq

Senior Member
Aug 14, 2011
121
271
0
FLASHING TUTORIAL FOR DUMMIES​
<ICS SGS TEAM ROM>
NOTE : NOT ALL THESE STEPS ARE A MUST OR NEEDED TO BE DONE IN THIS PARTICULAR WAY, BUT IT IS BEST TO DO SO IN ORDER TO AVOID FURTHER PROBLEMS AND MAKE SURE THE FLASHING PROCESS IS AS CLEAN AS POSSIBLE.

>EVERYTHING WILL BE WIPED<

PAY ATTENTION AND TAKE YOUR TIME !

I DO NOT ANSWER TO QUESTIONS WHICH HAVE ALREADY BEEN ANSWERED IN THIS TUTORIAL OR IN THE LINKS THIS TUTORIAL PROVIDES !

THIS IS WHAT YOU HAVE TO DO STEP BY STEP :

It doesn`t matter on what rom you are, first you need to download a stock gingerbread rom, a kernel which has root and clockworkmod recovery and of course a flashing program (in this case Odin, simply because it does the job), also Samsung USB Drivers :

NOTE : It would be best to have your phone fully charged before flashing

1. First install the drivers ONLY if you haven`t already installed them, also if you have Kies installed there is no need to install these drivers, but you are better off installing these anyway : http://dev-host.org/ZRA
2. Download this package (it includes i9000 stock rom+kernel+odin) : http://dev-host.org/RAE, if you have a Captivate or a Vibrant just download a stock rom for your phone model and find a kernel which has root and cwm in it.

NOTE : The next step will require using the 3 key combo for accessing the clockworkmod recovery and also the download mode.The 3 key combo used below is for the Samsung Galaxy S GT-i9000. If you own a Captivate or a Vibrant please click this link and choose your phone model to see what 3 key combo must be used, as it differs from one phone model to another : http://tinyurl.com/6q6ajpx

3. After you have extracted all the contents you downloaded and installed drivers, put your phone into download mode using the 3 key combo : volume DOWN + home button+power button, keep those pressed until it goes into download mode.

4. Connect phone to PC via USB Cable and open Odin (windows should detect the phone and install some drivers, after it`s finished you should see the message "Added!" in Odin which means Odin succesfully detected your phone so now you are ready to flash)>check Re-Partition Option>press PIT button and browse for the s1_odin_20100512.pit file, press BOOTLOADER button and browse for the APBOOT… file, press PDA button and browse for the CODE….file, press PHONE button and browse for the MODEM….file, press CSC button and browse for the GT-I9000-CSC….file. PRESS START button and wait for the green pass notification in Odin.

• When the phone reboots into the rom, wait for the setup wizard to appear and then just use the 3 key combo into the download mode again.
Close Odin and open it again> press PDA button and browse for CF-Root…file> Press START button and wait for the green pass notification in Odin.

• When the phone reboots into the rom set your phone to mass storage mode from settings>wireless & network>usb settings, copy the ICS SGS rom needed for your phone model, to your INTERNAL SD root location (G: for example, copy the rom here) via USB Cable from here : http://tinyurl.com/7f4m8bp.

• Now we have to go to clockworkmod recovery using the 3 key combo : volume UP + home button + power button, keep those pressed until it goes into the clockworkmod recovery.

• Using the volume buttons to navigate up and down select Wipe Data/Factory Reset by pressing the home button, a submenu will appear, hit YES. Wait for it to finish and then Wipe Cache the same way you did with Wipe Data/Factory Reset> Go to advanced menu>a submenu will appear and Wipe Dalvik Cache.Go back to main menu.

Now it`s time to flash the ICS SGS ROM :

Select install zip from sd card > choose zip from sd card> browse for the rom zip>choose YES and let it do the magic. If it happens to reboot immediately into clockworkmod recovery with a different look (blue writing), it means it actually flashed just the ICS Kernel first therefore you have to flash again so the ICS ROM gets installed too, just follow the steps above.

NOTE : Sometimes it works from the first try and sometimes it reboots into clockworkmod recovery instead of flashing the rom because it changes KERNEL first, prior to flashing the rom.

If it boot loops or you are experiencing other issues read here : http://tinyurl.com/78ajjhc

Now all you need to do is wait for it to finish.After the flashing is done> Wipe Data/Factory Reset, Wipe Cache and Dalvik Cache as you already know how to do it and choose Reboot System Now. Give it some time to boot, it usually takes at most 5 minutes to boot. If it doesn`t boot, just reflash the rom as described in the steps above.

NOTE (i9000 users) : At this point if it still doesn`t boot past the Galaxy S Logo after you`ve reflashed the rom, flash Semaphore ICS Kernel via CWM and then just Wipe Cache/Dalvik Cache and Reboot to System.Can`t acces CWM anymore? You have to start all over again from step 4.Only this time flash Semaphore ICS Kernel right after the ICS Rom finishes flashing, Wipe Data/Factory Reset, Wipe Cache/Dalvik Cache and Reboot to System.

NOTE (Captivate/Vibrant users) : The same applies to you if you encounter the upper issues, only instead of Semaphore Kernel, use Nushor`s kernel.

Semaphore ICS Kernel : http://goo.gl/qWlOJ

Nushor`s Kernel : http://db.tt/CMC5BJ0f

If you don`t have network signal it usually means it`s a modem related problem so just copy to your internal sd card one of these modem zips : http://dev-host.org/SSR and flash it the same way you flashed the ICS SGS rom via clockworkmod recovery (without the Wipe Data/Factory Reset which is needed only when flashing ROMs). It should solve the problem.

NOTE : Also if you are experiencing heavy battery drain with or without 3G ON (internet included),
you should try a different modem from here :
http://tinyurl.com/68reom6.
Just flash one using the clockworkmod recovery.

Also you can find some modems here : http://goo.gl/R9q5l

Depending on the region you are in, modems can make a huge difference!

But usually 3G/Internet usage will discharge battery faster then Wi-Fi usage.


THERE IS NO "BEST MODEM" > you have to experiment yourself with these modems!

If it still doesn`t solve the problem search for possible fixes in the ICS SGS Thread : http://tinyurl.com/7kb46ox.

If you haven`t found any fix after you have SEARCHED THOROUGHLY or if you have any other issues come here : http://webchat.freenode.net/ ,

Channel : ##icssgs.

People there will help you figure it out.

IMPORTANT : Yes, 4.2 ROM is a bit laggy because of the kernel and the launcher, so all you need to do is to flash Semaphore ICS Kernel (the i9000 users), flash Nushor`s Kernel (the Captivate and Vibrant users) and install Nova Launcher from Market and it`s all good in the hood :D

Semaphore ICS Kernel : http://goo.gl/qWlOJ

Nushor`s Kernel : http://db.tt/CMC5BJ0f

NOTE (i9000 users) : After you`ve flashed the kernel, you will notice the Semaphore App in the App Drawer, open it and set it like this : Governor > smartassv2 | Scheduler : noop. Reboot and you`re done!

NOTE (Captivate/Vibrant users) : After you`ve flashed Nushor`s Kernel, install NSTools from Market, open it and set it like this : Governor > smartassv2 | Scheduler : fiops.Reboot and you`re done!

IMPORTANT : You may experience severe battery drain every time you will reboot your phone. 100% of the CPU will be used constantly even if you hardly use the phone and thus the battery will be quickly discharged.To solve this, just open NSTools and change the governor to something else and then change it back.The CPU will come back to its normal state. It seems it is a NSTools issue, though i`m not sure this is a general problem.

IMPORTANT (Semaphore Kernel users) : If you want to use tethering, make sure you enable "netfilter" in the Semaphore App!

NOTE : If you find something doesn`t work for you after you`ve flashed the rom, basic things such as camera for example, it means you have to flash the rom again!

Auto Brightness doesn`t work yet, in the meanwhile use the app Custom Auto Brightness from here : http://tinyurl.com/7fsreu3.
Or you can buy this brilliant app :
http://goo.gl/g0y9i

If you find your screen has a blue, red or yellow tint over it, install Voodoo Sound : http://goo.gl/DXzw8 and tap the button "reset to 2.3.3 defaults".It should fix the issue.

NOTE (Semaphore Kernel users) : Fortunately auto brightness works well with this kernel, thank stratosk for the auto brightness driver!

"Just because you`re running the latest OS, does not mean your phone magically doubles in RAM and gains an extra core, IT WILL LAG SOMETIMES, no software can fix that." (PaulForde said it :cool:)

Please show your appreciation by donating a beer to the devs or supporting them in any way you can.

Donation Page : http://tinyurl.com/6nve3uh

Thanks and Credits : http://tinyurl.com/bqsr7z3

I took the time to write this tutorial because it`s the least I can do to give something back to the community.

If you followed every step in this tutorial it is highly unlikely to fail this, only if you can`t read English properly.

If you found this tutorial helpful just press “Thanks” .

Good Luck ! :D
 
Last edited:

t0m0rr0w

Member
Aug 18, 2010
12
3
0
Bourgas
I've just armed my SGS from Gingerbread 2.3.5 to ICS using this thread. Clear step-by-step guidance.

My phone now is ready for second live :)

Thank you @psyqiq
 

SuperRoo

Member
Feb 6, 2012
6
0
0
Perth, West Australia
Great write up. It will help me out a lot. Only thing I can think of that might also help us noobs out is an explanation of how and what we might want to backup before doing the flash. This would make this thread the ultimate flashing guide for dummies.

I've flashed another rom previously but lost a lot of stuff I would like to have kept like sms's, photos, emails and settings (wifi passwords & settings, ect). I still don't no how to keep my emails and settings but XDA has helped figure out the other stuff.

A couple of questions also, does the sim card and/or sd card need to be removed to do this flash? This is something I've read in other guides.


Sent from my GT-I9000 using Tapatalk
 

psyqiq

Senior Member
Aug 14, 2011
121
271
0
SuperRoo it is not needed to remove the sim card and neither the external_sd, it would have been mentioned in the tut. As for the backups it`s impossible to backup everything from settings to apps etc...and restore them into ICS in such a way that everything would work. Restoring stuff from GB to ICS brings incompatibilities unfortunately so it is best to redo all those settings you had on the GB Rom rather than restoring them from a backup.
 

Mr Woolf

Senior Member
Sep 13, 2010
2,866
787
0
Cornishman stuck in Yorkshire
SuperRoo it is not needed to remove the sim card and neither the external_sd, it would have been mentioned in the tut. As for the backups it`s impossible to backup everything from settings to apps etc...and restore them into ICS in such a way that everything would work. Restoring stuff from GB to ICS brings incompatibilities unfortunately so it is best to redo all those settings you had on the GB Rom rather than restoring them from a backup.
We recently had a guy report in the mintberry thread that flashing miui fried his sd - not sure if he odined stock before cwm flash.

It's not a precaution that I have ever taken, though it is considered safe flashing procedure to remove sd and sim (I have never heard of any adverse effects to a sim card).
 

BenzOzzy

Member
Feb 16, 2012
7
1
0
NSW
Great tutorial thanks.

One question before i install this, how do i know/find which modem is best suited or specific to our region and service provider (NSW - OPTUS). (I post the same question over here but i think this thread is more appropriate)

My wife had issues on a previous flash i did 2.3.4 whereby she had no internet and could not sent SMS/MMS until a friend provided me with a different modem (i think it was the modem) and it fixed the problem.

Obviously not an expert in this area but i can follow a decent tutorial :)

Cheers.
 

psyqiq

Senior Member
Aug 14, 2011
121
271
0
woolf clubs it is almost impossible to fry the sd card just by flashing something.This is ackward.Only an overload of electricity through the USB ports would cause that, if it`s possible.I don`t see any other logical way for such a thing to happen when it comes to frying hardware, in which case it is very unfortunate.

BenzOzzy here is some info about some modems and regions : http://tinyurl.com/3yh3e3m, although even if you flash a modem that is not ment for your region, it does not necessarily mean it will perform worse. Nobody can tell you what modem is best for a specific region, only if someone had some good feedback with it, therefore you have to search the xda (in your case) for users that had a good feedback with a specific modem in australia. Though the JVT modem should do just fine.
 
Last edited:
  • Like
Reactions: BenzOzzy

BenzOzzy

Member
Feb 16, 2012
7
1
0
NSW
Ok, thanks psyqiq.

---------- Post added at 02:55 PM ---------- Previous post was at 02:30 PM ----------

Actually i apologize, i believe i should have been asking you about which is the best CSC file not the modem.

Wouldn't the CSC be specific to my provider, with apk and their apps? (all the bloatware my wife seems to like)

I seem to recall with OPTUS its 'OPS' something or other... (GT-I9000-CSC-XXX OPS) or (CSC_I9000------.tar.md5) or something like.

Sorry if i've hijacked your thread here, i am gonna update her phone tonight if all goes well and want it to go well

Thanks.
 
Last edited:

psyqiq

Senior Member
Aug 14, 2011
121
271
0
BenzOzzy forget about CSC in ICS.There is no ICS firmware for i9000 and therefore no CSC either.We can only flash cm modems and some kernels like glitch, devil or semaphore.That's it.After all, this is just a port rom.Happy flashing!
 
  • Like
Reactions: BenzOzzy

pedaone

Senior Member
Feb 11, 2012
54
14
0
Bad Großpertholz
try JVU

Great tutorial thanks.

One question before i install this, how do i know/find which modem is best suited or specific to our region and service provider (NSW - OPTUS). (I post the same question over here but i think this thread is more appropriate)

My wife had issues on a previous flash i did 2.3.4 whereby she had no internet and could not sent SMS/MMS until a friend provided me with a different modem (i think it was the modem) and it fixed the problem.

Obviously not an expert in this area but i can follow a decent tutorial :)

Cheers.
Hey BenzOzzy,
ICSSGS uses the JVU Modem which seems to work for most of the people, i changed modems in the past release reading that it would also affect battery life.
in ICSSGS RC4.2 i kept the JVU modem, gives me performance as usual and battery life is good as well (btw. using semaphore 0.8.1 kernel ;) )
 
  • Like
Reactions: BenzOzzy

BenzOzzy

Member
Feb 16, 2012
7
1
0
NSW
Ahh, i've run into a problem at this point, when it all was going accordingly

Select install zip from sd card > choose zip from sd card> browse for the rom zip>choose YES and let it do the magic. If it happens to reboot immediately into clockworkmod recovery with a different look (blue writing), it means it actually flashed just the ICS Kernel first therefore you have to flash again so the ICS ROM gets installed too, just follow the steps above.
Actually i noticed a problem when i tried to add ICS_4.0.3_MR1-RC4.2_I9000 to my sd card. I could not see the sd card on the list so i dumped it into the root directory, disconnected the usb cable then browsed the phone where i can see the sd card directory and manually moved ICS_4.0.3_MR1-RC4.2_I9000 into it that way.

Problem is, when i go to install zip from sd card > choose zip from sd card > i cant find the rom zip...but i can see that ICS_4.0.3_MR1-RC4.2_I9000 is in the sd card.....wtf?

I hope that my stupidity makes sense.

Any ideas that can help. :confused: ?
 

psyqiq

Senior Member
Aug 14, 2011
121
271
0
BenzOzzy actually you do not have to see a folder named "sd card" while in clockworkmod recovery, therefore when you copy the rom prior to flashing you copy it on the internal sd root. Just set your phone to mass storage, connect the phone to PC and it will detect 2 sd cards, one internal and one external (if you have one).Just double-click the internal one from my computer and you`re there on the root location (G: for example, copy the rom here).That`s it.Now just go to cwm and flash it.
 
Last edited: