Flyme OS 6 - Oneplus3

[dekefake]

Meizu released Flyme OS 6 for the Oneplus 3, based on Marshmallow

http://www.flyme.cn/firmwarelist-110.html#8
Direct link from flyme servers

Installation instructions : thanks @XDRdaniel
1. Flash OOS 3.2.8 firmware from here
2. Flash the recovery provided by the dev (That one)
3. Flash FlymeOS
4. Wipe everything except system. (yes, including all your files)
5. Reboot and profit.[/QUOTE]


Version : Flyme 6.7.5.19R beta
MD5：2ae2a93f2a0735672472fab34475946b
Size ：1038MB
Date : 2017-05-23

 

[ASHU3003]

Thanks dude waiting for this sooooooo Long

Sent from my ONEPLUS A3003 using Tapatalk

 

[Andreas_Chronopoulos]

Thanks dude waiting for this sooooooo Long

Sent from my ONEPLUS A3003 using Tapatalk

Why that?can you explain to us who have never used flume os?
I wonder if the camera finally works better with flyme

Sent from my ONEPLUS A3003 using Tapatalk

 

[dekefake]

Thanks dude waiting for this sooooooo Long

Sent from my ONEPLUS A3003 using Tapatalk

Why that?can you explain to us who have never used flume os?
I wonder if the camera finally works better with flyme

Sent from my ONEPLUS A3003 using Tapatalk

TBH i didnt tried it, i have to run unrooted OOS for now, and i dont know if Flyme developers have been collaborating with Oneplus developers to use their camera code inside Flyme. I will ask Tony for that

 

[Andreas_Chronopoulos]

Unfortunately camera development from OnePlus was left behind.and it is very very bad that the code isnt public.

Sent from my ONEPLUS A3003 using Tapatalk

 

[Spartaanzzz]

Unfortunately camera development from OnePlus was left behind.and it is very very bad that the code isnt public.

Sent from my ONEPLUS A3003 using Tapatalk

So the camera is pretty bad anything else (maybe use the port mod) ? Everything in English not in Chinese ? I gues also dash charge is missing?

 

[ASHU3003]

Mine stuck on flyme boot screen

Sent from my ONEPLUS A3003 using Tapatalk

 

[anmolkakkar]

Ok, so tried flashing this over Experience OS Rom v2.1 (after wiping EVERYTHING)
TWRP: Latest blu_spark
Took backup in TWRP and after flashing, ended up with a error in TWRP that it failed installing. I re-selected the zip file again (without wiping anything) and it ended with a successful flashing. Upon rebooting (Very fast booting though), it ended up in a force close SystemUI issue and nothing would be visible on screen. I powered off to restore my backup, but TWRP asks for a password just after entering into TWRP (it shows my internal storage as Encrypted now, even though it was NEVER encrypted).

All in all, I need some help to restore my previous ROM without having to wipe my internal storage. Any suggestions?

Also, Please suggest on how to install this ROM for people with custom ROMs already running and which TWRP version to use.

 

[null0seven]

google transleit:
Users who are not familiar with the brush machine can also download the ROM package, you can use a key brush machine tool brush machine wizard

Version: Flyme 6.7.5.8R beta
MD5: 1e1b9250ba920fd876f47aa9aa8c8066
File size: 1021MB
Posted: 2017-05-10

update record
Flyme 6 For OnePlus3 first edition

[Practical tutorial] Flyme6 for OnePlus3 Brush tutorial
Prerequisites: Download the appropriate tool, twrp recovery, Flyme ROM package, and official ROM package
Note: master brush method, manual brush, do not recommend using third-party Brush tool, bring their own official ROM package to facilitate the brush back to the official ROM
Note: self-backup data, brush machine risk, at your peril

Tools download address: https: //pan.baidu.com/s/1o7LBu7g
ROM download address: http://www.flyme.cn/firmwarelist-110.html
Author Baidu Cloud Download: Flyme6 for OnePlus3 Baidu Clouds

PC Brush Method:
First, set, on the phone, click repeatedly on the version number, open the developer option, open 【OEM unlock】
Mobile phone through the usb link PC, installed adb driver, mobile phone shutdown, while holding down the power button and volume keys to enter fastboot mode

Second, unlock the bootloader
Fastboot oem unlock
The volume key selects yes to unlock


Three, fastboot mode brush into twrp recovery
Fastboot flash recovery twrp.img
Volume key to select recovery, press the power button to enter
After entering twrp
Ask whether to allow modification of the system, sliding selection to allow modification
If you are prompted for a password, and the previously set password is not available, choose to cancel the password, format the data partition
Flyme6 brush machine package into the phone


Four, into the twrp brush machine
1. Clear and slide the slider for double operation
2. Install, select Flyme's ROM package, click, slide to start brushing
3. Restart, be patient for ten minutes

 

[XDRdaniel]

I also tried to install it over a 7.1.2. rom and it booted fast but it resulted in systemui crash. I then switched to 6.0.1 and their custom recovery, and after flashing, the screen is black. After one reboot, the animation starts for 2 secs, and then it goes black again, this time with the notification LED white. If anyone manages to flash this successfully, let us know

 

[Ashish_Maurya]

stucked on boot !!!!!

 

[XDRdaniel]

stucked on boot !!!!!

Aren't we all?:laugh:

 

[Deniece611]

A better translated version of steps to flash the ROM. (I translated myself, so, sorry for any grammar errors)

Those who are not familiar with flashing rom, you can use the one-click flashtool provided.

Version: Flyme 6.7.5.8R beta
MD5: 1e1b9250ba920fd876f47aa9aa8c8066
File size: 1021MB
Posted: 2017-05-10
Version: Flyme 6 for OnePlus 3 first edition

Tutorial for Flyme 6 installation
Prerequisites: One-click flashtool, TWRP recovery, Flyme ROM and Official ROM
Recommended: Know the way to flash a ROM, using manual flashing method, not recommended using third party flashing tool, self-prepare official ROM and flash back to official ROM.
Important: Backup your data, risk of flashing ROM should be bear by user.

Flashtool: https://pan.baidu.com/s/1o7LBu7g
Flyme ROM: http://www.flyme.cn/firmwarelist-110.html
Dev (Baidu Cloud): Flyme6 for OnePlus3 (https://pan.baidu.com/s/1mhKK1te#li...三方ROM/Flyme6-A3000&parentPath=/android/第三方ROM)

Steps to flash Flyme ROM using PC:
1. Go to setting, then about phone, tap on build version 7 times, to acquired developer option, tap on Developer Option, and turn on OEM unlock.
Use a USB cable to connect your phone to your PC, install ADB drivers, turn off your phone, then hold power button + volume up to enter fastboot mode.
2. Unlock bootloader
Type “fastboot OEM unlock” on command prompt
Use volume button to select “Yes”
3. Using fastboot to flash TWRP recovery
Type “fastboot flash recovery twrp.img” on command prompt
Using volume button to select recovery, and power button to select.
Slide to allow TWRP to allow modification of the system
If you are prompted for a password, and the previously set password is not usable, tap cancel, then format the data partition
Copy Flyme6 ROM zip to your phone
4. Flash ROM in TWRP
Wipe – Swipe to Factory Reset
Install – Select the Flyme6 ROM zip and swipe to confirm flash
Reboot – Tap on system, wait patiently for about 10 minutes

 

[prateektaneja]

I read this on the OP3T thread by someone who was able to successfully get Flyme OS to boot:

1. reboot to recovery
2. wipe data, cache and factory reset
3. flash the OS

if it takes more than 10 mins to boot or if you'll get a black screen then go back to TWRP and wipe again data, cache and do factory reset, should be working.

booting time may take few minutes so be patient.

 

[michel sedgh]

Guys maybe the Nougat firmwares are the problem, this is a Marshmallow rom. Try Marshmallow firmware.

 

[baskaflyfer]

 

[XDRdaniel]

Oh my god, teach us master!!!?!

 

[Andreas_Chronopoulos]

@baskaflyfer Is the camera better than stock os please?

Sent from my ONEPLUS A3003 using Tapatalk

 

[mdda7]

work fine with me

use 3.2.8 firmware

 

[ASHU3003]

booted and working like charmhttp://cloud.tapatalk.com/s/591442f54d0f6/S70511-162405.jpg?
http://cloud.tapatalk.com/s/591443038052a/S70511-162355.jpg?


Sent from my ONEPLUS A3003 using Tapatalk