Hey guys, I'm looking for some help. I installed a Tesla Style Android radio into my 2011 Ford Fiesta recently and everything works properly through the canbus except the Steering wheel controls. I've tried altering the canbus settings in the factory settings section but it didn't work. The radio can detect when the car is in reverse (for the camera to come on) and also when any of the doors are open so the canbus box is definitely working just not the steering wheel controls. I have the exact steering wheel controls as the original poster with the M button in the middle instead of the newer OK button. From what I understand, I need to take one of the wires coming off connector X1 and join it with another wire on connector A which is the ISO connection going into the back of the radio. This basically bypasses the canbus box for steering controls if I understand correctly. Problem is I have no idea which colour wires to join together! I also have a key2 brown wire coming off connector A that isn't going into anything but based on googling that's normal and can be ignored. Could someone provide photos or something as to which wires need to be joined