[FULL GUIDE] [ANDROID 10] Install ASOP10 by DarKJoker360 Huawei p8 lite 2017 (pra-lx1)

Search This thread

pitrazzu

Member
Feb 28, 2013
21
4
fagnano castello
This guide is the only one made and tested personally by me, I am not responsible for malfunctions or any damage to the device, read carefully every single step and everything will be successful
emo_laughing.png


[ATTENTION]
Before proceeding with this guide you must have performed the unlock the bootloader, HERE you can find the guide made by me

[Download the necessary files]
(1) Download:
- Twrp by DarkJocker360 (Download the most recent, even if there is script P10 lite is perfectly compatible with our mobile)
- Magisk
- Aosp10
- MagiskHidePr op s
- Gapp (select ARM64, 10.0, nano)
- Fix NFC (without this the NFC module does not work)
- Encrypt Disable (Without this nothing works)
- Kernel Morfuz
- Magisk Unistaller
(2) Now we have to put everything (except the Twrp and the Aosp10 which instead will be put in the folder created on the desktop) on a microSD that we will insert in the mobile
(3) Extract the Aosp from the archive, always in the folder created on the desktop, we should obtain a file with a silmile wording DarkJoker360_AOSP-10_prague-20201009.img

[Recovery installation (all commands are without quotes)]
(1) Connect the mobile phone to the computer and provide the debug permissions as in the previous points
(2) Let's move to the folder created on the desktop and open a powershell as in point 4 of [UNLOCK BOOTLOADER], give the command "adb devices" to verify that our mobile is displayed
(3) Now we give the command "adb fastboot bootloader" and we send, we will see the same screen as in point 7 [BOOTLOADER UNLOCK]
(4) In the powershell we give the following command to install the recovery "fastboot flash recovery_ramdisk TWRP_3.4.0-0-warsaw_DarkJoker360_20200611.img"
(5) It will take very little, once finished we give the command "fastboot reboot" and just the screen of the mobile phone turns black immediately disconnect it from the computer and immediately hold down
the volume key up + power, as soon as we feel a slight vibration we leave only the finger from the power button, as soon as the huawei logo appears we can also remove it from the volume. After a few seconds two words will appear, one white and one yellow, let's wait a bit and we will be in recovery mode

[Aosp10 installation (all commands are without quotes)]
[To enter RECOVERY MODE, always from the mobile phone off: combination of volume up + power keys, as soon as we hear a slight vibration we leave only the finger from the power button, as soon as the huawei logo appears we can also remove it from the volume]
[If during any procedure from recovery the screen should be turned off, just double-tap or lightly press the power button and slide the slider to unlock it]
(1) In the screen that appears, drag the slider to enter the recovery screen
(2) Let's go to Wipe ---> Advanced wipe ---> and select Dalvik / artcache; cache; date; system and drag the slider to confirm
(2.1) Whenever we are installing something from the twrp and a new screen with two blue ticks appears, we remove them and drag the slider again
(3) We press the home icon at the bottom center to return to the initial screen of the twrp
(4 ) We connect the mobile phone to the computer and in the twrp go to Reboot ---> Bootloader
(5) We will see the same screen as in point 7 [UNLOCK BOOTLOADER]
(6) Let's move to the folder created on the desktop and open a powershell as in point 4 of [BOOTLOADER UNLOCK]
(7) We give the following command to install in the real operating system "fastboot flash system DarkJoker360_AOSP-10_prague-20201009.img" and send it, it will take a couple of minutes
(8) Once finished we give the command "fastboot reboot" and as soon as the screen of the mobile phone turns black let's immediately disconnect it from the computer and immediately hold down
the volume key up + power, as soon as we feel a slight vibration we leave only the finger from the power button, as soon as the huawei logo appears we can also remove it from the volume. After a few seconds
two words will appear , one white and one yellow, let's wait a bit and we will be in recovery mode, we can do the slide again to access the twrp functions
(9) Go to Install ---> Select Storage ---> MicroSd card and select "magisk-phh-v19.3-for + v218.zip" ---> scroll the slide to install, once the installation is finished, press the home button
(10) Back in the home we proceed as follows: Mount ---> Select storage ---> internal storage; here we uncheck everything and select ONLY the VENDOR item and press the home button
(11) We continue like this: Install ---> select internal storage ---> microSD ---> Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip --- > slide to install and wait for it to finish, it could give an error in red but does not compromise anything ---> press on Reboot Sytem (see point 2.1)
(12) If everything went well, our phone will start up in a couple of minutes, but that's not all
(13) Recovery mode
(14) Slide to enter recovery ---> Install ---> Select Storage ---> MicroSd card ---> press on open_gapps-arm64 ---> slide to install
(14.1) If it gives us an error in red with the number 70 we solve as described in the following line:
(Fix error 70) Key home ---> Wipe ---> Advanced Wipe ---> Repair or Change File System ---> We select only the System item ---> Resize File System ---> swipe to confirm ---> home button ---> Install ---> Select Storage ---> MicroSd card ---> press on open_gapps-arm64 ---> slide to install ---> reboot system (see point 2.1)
(15) Recovery mode
(16) Slide to enter recovery ---> Install ---> Select Storage ---> MicroSd card ---> press on NFCfix ---> swipe to confirm ---> reboot system (see point 2.1)
(17) Recovery mode
(18) Slide to enter recovery ---> Install ---> Select Storage ---> MicroSd card ---> press on MagiskHidePropsConf-v4.0.0 ---> swipe to confirm ---> reboot system (see point 2.1)
(19) After the mobile phone starts you can connect to a wifi network, set up your google account and install from playstore ONLY AND ONLY, the two applications below, I leave you the lnk to verify that they have the same icon:
Termux and BusyBox
(Once installed we open Busybox, we will be asked for root permissions and we grant them, it will start loading all the modules and it will take 2-3 minutes, once finished we press on install, we close the window that will appear)
(20) We return to the applications, we open Termux and provide root permissions if asked and type in order:
su (and we give enter)
props (and we give enter)
1 (and we give enter)
f (and we give enter)
(21) At this point we enter the number corresponding to Huawei and send it; number corresponding to the model which is "p8 lite" and we send; at each next entry that comes out we type the y to confirm and so the mobile will restart

[Attention! the next two steps I don't know if they are really necessary but I did them and the phone is fine]
- Recovery mode
- Slide to enter recovery ---> Install ---> Select Storage ---> MicroSd card ---> press on Magisk-uninstaller ---> swipe to confirm ---> reboot system (see point 2.1)
- Recovery mode
- Slide to enter recovery ---> Install ---> Select Storage ---> MicroSd card ---> press on Kernel_Morfuz5.6_HI6250 ---> swipe to confirm ---> reboot system (see point 2.1)
- Recovery mode
- Slide to enter recovery ---> Wipe ---> Advanced Wipe ---> and select Dalvik / Artchache and cache ---> swipe to confirm ---> reboot system (see point 2.1)

[ WARNING! THESE STEPS ARE FUNDAMENTAL TO MAKE ALL APPLICATIONS WORK]
- Recovery mode
- Slide to enter recovery ---> Wipe ---> Advanced Wipe ---> and select ONLY internal storage ---> swipe to confirm --- > reboot system (see point 2. 1)

[END]
Now you can enjoy the call and download from the back all the anxiety you have accumulated during the procedure: P


[BUG]
- With this rom the message notifications do not arrive, you just need to install google messaging -> https://play.google .com / store / apps / d ... hl = en_US & gl = US

Thank's to:
@DarkJoker360
@CATUVA21
 
Last edited:

esko90

Member
Jan 3, 2012
5
0
I am testing this on my device and many applications do not support the configuration of a path for file storage, moreover even choosing to use the external sd card as the phone default memory, it becomes impossible to transfer files from the outside. Has anyone else noticed this?
 

pitrazzu

Member
Feb 28, 2013
21
4
fagnano castello
I am testing this on my device and many applications do not support the configuration of a path for file storage, moreover even choosing to use the external sd card as the phone default memory, it becomes impossible to transfer files from the outside. Has anyone else noticed this?
Did you have follow this step?
[ WARNING! THESE STEPS ARE FUNDAMENTAL TO MAKE ALL APPLICATIONS WORK]
- Recovery mode
- Slide to enter recovery ---> Wipe ---> Advanced Wipe ---> and select ONLY internal storage ---> swipe to confirm --- > reboot system (see point 2. 1)
 

wowdecision

New member
Aug 19, 2020
2
0
Did this on WAS-LX1A. Got into bootloop after installing the "Kernel_Morfuz5.6_HI6250". Reinstalled stock through recovery and did the whole thing again without installing the kernel and it's all fine.
 

esko90

Member
Jan 3, 2012
5
0
Try to format the micro sd with mini tool partition, delete all partition table and make one
I could try.
the problem occurs when, from the device, you choose to use the sd card and therefore you are asked to format it.
from this moment the card works perfectly for applications and device data but if you try to transfer files by connecting the device to the pc, no external memory available is detected.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    This guide is the only one made and tested personally by me, I am not responsible for malfunctions or any damage to the device, read carefully every single step and everything will be successful
    emo_laughing.png


    [ATTENTION]
    Before proceeding with this guide you must have performed the unlock the bootloader, HERE you can find the guide made by me

    [Download the necessary files]
    (1) Download:
    - Twrp by DarkJocker360 (Download the most recent, even if there is script P10 lite is perfectly compatible with our mobile)
    - Magisk
    - Aosp10
    - MagiskHidePr op s
    - Gapp (select ARM64, 10.0, nano)
    - Fix NFC (without this the NFC module does not work)
    - Encrypt Disable (Without this nothing works)
    - Kernel Morfuz
    - Magisk Unistaller
    (2) Now we have to put everything (except the Twrp and the Aosp10 which instead will be put in the folder created on the desktop) on a microSD that we will insert in the mobile
    (3) Extract the Aosp from the archive, always in the folder created on the desktop, we should obtain a file with a silmile wording DarkJoker360_AOSP-10_prague-20201009.img

    [Recovery installation (all commands are without quotes)]
    (1) Connect the mobile phone to the computer and provide the debug permissions as in the previous points
    (2) Let's move to the folder created on the desktop and open a powershell as in point 4 of [UNLOCK BOOTLOADER], give the command "adb devices" to verify that our mobile is displayed
    (3) Now we give the command "adb fastboot bootloader" and we send, we will see the same screen as in point 7 [BOOTLOADER UNLOCK]
    (4) In the powershell we give the following command to install the recovery "fastboot flash recovery_ramdisk TWRP_3.4.0-0-warsaw_DarkJoker360_20200611.img"
    (5) It will take very little, once finished we give the command "fastboot reboot" and just the screen of the mobile phone turns black immediately disconnect it from the computer and immediately hold down
    the volume key up + power, as soon as we feel a slight vibration we leave only the finger from the power button, as soon as the huawei logo appears we can also remove it from the volume. After a few seconds two words will appear, one white and one yellow, let's wait a bit and we will be in recovery mode

    [Aosp10 installation (all commands are without quotes)]
    [To enter RECOVERY MODE, always from the mobile phone off: combination of volume up + power keys, as soon as we hear a slight vibration we leave only the finger from the power button, as soon as the huawei logo appears we can also remove it from the volume]
    [If during any procedure from recovery the screen should be turned off, just double-tap or lightly press the power button and slide the slider to unlock it]
    (1) In the screen that appears, drag the slider to enter the recovery screen
    (2) Let's go to Wipe ---> Advanced wipe ---> and select Dalvik / artcache; cache; date; system and drag the slider to confirm
    (2.1) Whenever we are installing something from the twrp and a new screen with two blue ticks appears, we remove them and drag the slider again
    (3) We press the home icon at the bottom center to return to the initial screen of the twrp
    (4 ) We connect the mobile phone to the computer and in the twrp go to Reboot ---> Bootloader
    (5) We will see the same screen as in point 7 [UNLOCK BOOTLOADER]
    (6) Let's move to the folder created on the desktop and open a powershell as in point 4 of [BOOTLOADER UNLOCK]
    (7) We give the following command to install in the real operating system "fastboot flash system DarkJoker360_AOSP-10_prague-20201009.img" and send it, it will take a couple of minutes
    (8) Once finished we give the command "fastboot reboot" and as soon as the screen of the mobile phone turns black let's immediately disconnect it from the computer and immediately hold down
    the volume key up + power, as soon as we feel a slight vibration we leave only the finger from the power button, as soon as the huawei logo appears we can also remove it from the volume. After a few seconds
    two words will appear , one white and one yellow, let's wait a bit and we will be in recovery mode, we can do the slide again to access the twrp functions
    (9) Go to Install ---> Select Storage ---> MicroSd card and select "magisk-phh-v19.3-for + v218.zip" ---> scroll the slide to install, once the installation is finished, press the home button
    (10) Back in the home we proceed as follows: Mount ---> Select storage ---> internal storage; here we uncheck everything and select ONLY the VENDOR item and press the home button
    (11) We continue like this: Install ---> select internal storage ---> microSD ---> Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip --- > slide to install and wait for it to finish, it could give an error in red but does not compromise anything ---> press on Reboot Sytem (see point 2.1)
    (12) If everything went well, our phone will start up in a couple of minutes, but that's not all
    (13) Recovery mode
    (14) Slide to enter recovery ---> Install ---> Select Storage ---> MicroSd card ---> press on open_gapps-arm64 ---> slide to install
    (14.1) If it gives us an error in red with the number 70 we solve as described in the following line:
    (Fix error 70) Key home ---> Wipe ---> Advanced Wipe ---> Repair or Change File System ---> We select only the System item ---> Resize File System ---> swipe to confirm ---> home button ---> Install ---> Select Storage ---> MicroSd card ---> press on open_gapps-arm64 ---> slide to install ---> reboot system (see point 2.1)
    (15) Recovery mode
    (16) Slide to enter recovery ---> Install ---> Select Storage ---> MicroSd card ---> press on NFCfix ---> swipe to confirm ---> reboot system (see point 2.1)
    (17) Recovery mode
    (18) Slide to enter recovery ---> Install ---> Select Storage ---> MicroSd card ---> press on MagiskHidePropsConf-v4.0.0 ---> swipe to confirm ---> reboot system (see point 2.1)
    (19) After the mobile phone starts you can connect to a wifi network, set up your google account and install from playstore ONLY AND ONLY, the two applications below, I leave you the lnk to verify that they have the same icon:
    Termux and BusyBox
    (Once installed we open Busybox, we will be asked for root permissions and we grant them, it will start loading all the modules and it will take 2-3 minutes, once finished we press on install, we close the window that will appear)
    (20) We return to the applications, we open Termux and provide root permissions if asked and type in order:
    su (and we give enter)
    props (and we give enter)
    1 (and we give enter)
    f (and we give enter)
    (21) At this point we enter the number corresponding to Huawei and send it; number corresponding to the model which is "p8 lite" and we send; at each next entry that comes out we type the y to confirm and so the mobile will restart

    [Attention! the next two steps I don't know if they are really necessary but I did them and the phone is fine]
    - Recovery mode
    - Slide to enter recovery ---> Install ---> Select Storage ---> MicroSd card ---> press on Magisk-uninstaller ---> swipe to confirm ---> reboot system (see point 2.1)
    - Recovery mode
    - Slide to enter recovery ---> Install ---> Select Storage ---> MicroSd card ---> press on Kernel_Morfuz5.6_HI6250 ---> swipe to confirm ---> reboot system (see point 2.1)
    - Recovery mode
    - Slide to enter recovery ---> Wipe ---> Advanced Wipe ---> and select Dalvik / Artchache and cache ---> swipe to confirm ---> reboot system (see point 2.1)

    [ WARNING! THESE STEPS ARE FUNDAMENTAL TO MAKE ALL APPLICATIONS WORK]
    - Recovery mode
    - Slide to enter recovery ---> Wipe ---> Advanced Wipe ---> and select ONLY internal storage ---> swipe to confirm --- > reboot system (see point 2. 1)

    [END]
    Now you can enjoy the call and download from the back all the anxiety you have accumulated during the procedure: P


    [BUG]
    - With this rom the message notifications do not arrive, you just need to install google messaging -> https://play.google .com / store / apps / d ... hl = en_US & gl = US

    Thank's to:
    @DarkJoker360
    @CATUVA21
    1
    To unlock the bootloader I used PotatoNV, see Detailed description. It's a testpoint method, you need to open the phone, but in my case it was pretty easy as soon as the glue for the back side was soft.
    I had to buy BusyBox (Stephen Stericson) for € 2,69 and afterwards had to install Google Pay to remove my personal payment method.
    Otherwise I followed pitrazzu's instruction except installing the "Kernel_Morfuz5.6_HI6250". For me it worked without this. There was one minor issue, I was not able to successfully complete the phone Google system backup, it always says "Waiting to back up".

    Code:
                ______     ___   __     __) _____)
               (, /    ) /(,  ) (, /|  /  /       
                 /    / /    /    / | /   )__     
               _/___ /_/    /  ) /  |/  /         
             (_/___ / (___ /  (_/   '  (_____)
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone