[FW TOOL] Amazfit Verge | Stock US/Global/International Firmware Installer 3.2.7.5

Search This thread

ilNeminis

Member
Oct 4, 2019
8
0
Ankara
Redmi Note 8 Pro
I'm not sure what do you want to install and what your problem is, but this thread is about stock/original US firmware. When you have a problem installing something, take a log or a snapshot of installation process to check if there is something wrong during installation.

My bad... I was trying to write to this thread Custom Rom. Yes okay I will try to install your mod again and I will take a screenshot for you.
 

rees32

New member
Apr 6, 2018
1
0
I recently bought the verge, and I got the OTA 3.2.7.5 and updated the watch. Since that, I can't answer calls from the watch or call people. If I attend the call from the watch it doesn't work (my cellphone still ringing because the has not been attended) and if I make a call with the watch, the watch just transfers the call to my cellphone and I have to talk through my cellphone.


Is anyone facing the same problem as me? Before the update, I could attend calls from the watch.
 

ikimonojc

Member
Oct 13, 2015
9
1
Just bought a second hand Amazfit Verge which is still running ROM 3.2.0.13. It keeps prompting me to update to 3.2.7.5. However it always get error message and unable to update. Can anyone help me? Thanks
 

Pgaz111

New member
Jun 14, 2017
2
1
When I press in Tool All In One "Reboot Bootloader" button Verge goes to FastBoot but Tool doesn't see watch and I cant use Unlock button ?
 
Last edited:

Beatzy

Member
Jan 27, 2022
5
0
hi i connect my watch in pc and i try it after I've come this far

4. Booting modded recovery
****************************
< waiting for any device >

then it didn't see my device now i am staying in phase 1, what should i do?
fast boot writes on the screen @Saratoga79

lol i fixed only press in button 15 second
 
Last edited:

GoJo ^^

Senior Member
Dec 2, 2011
3,429
173
Apparently, i have 3.0.52.0 - what's different in last one (3.2.7.5) // Should i update?
 

2chillen

Senior Member
Oct 24, 2011
117
14
Wittmund
Xiaomi Mi Note 2
HTC U11
Hi Saratoga,
Today, after removing some apk watchfaces and some snapchat apk (wasn`t sure if it`s system app) (using Tool all in one), my Verge went to bootloop (space animation), after the Amazfit logo. I tried to flash the last two official versions from here
(3.2.7.0 and 3.2.75) and also tried to run unbrick.bat, but it`s still in the loop (last 15mins). When connected in this state, it`s recognized by tool, can enter recovery, bootloader, etc..

EDIT: currently installing your ROM, let`s see if that helps.
EDIT2: It helped :) Watch is booting up.
the snapchat.apk IS IMPORTANT AND HAVE TO STAY IN SYSTEM! Otherwise the Watch isn`t able to start.
 

Steffz85

New member
Aug 16, 2022
1
0
Help please. Can't flash. Constantly rebooting and like this on the clock. After opening the bat file. Everything stops at the stage of waiting for the device.
 

Attachments

  • IMG_20220816_134024.jpg
    IMG_20220816_134024.jpg
    3.1 MB · Views: 14
  • IMG_20220816_164443.jpg
    IMG_20220816_164443.jpg
    3.3 MB · Views: 13

2chillen

Senior Member
Oct 24, 2011
117
14
Wittmund
Xiaomi Mi Note 2
HTC U11
Also, sieht schlecht aus, aber keine Sorge. Schalten Sie sie zuerst aus. Halten Sie die Power-Taste für 10 Sek. Laden Sie dann den Akku. Verwenden Sie dann Propylalkohol und reinigen Sie die Pogos auf der Rückseite der Uhr. Dann nahm ein feines Stück Schleifpapier und säuberte die Pogos-Stifte in der Ladeschale.
Choose also the ADB and then Look in the App anf choose the Sideloading Option to send a Rom onto It. It should Work. Otherwise write is Here we're find a solution.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 15

    PACEficator_Project2.png

    THIS WILL NOT WORK ON AMAZFIT PACE, STRATOS OR STRATOS3
    THIS WILL NOT WORK ON AMAZFIT PACE, STRATOS OR STRATOS3
    THIS WILL NOT WORK ON AMAZFIT PACE, STRATOS OR STRATOS3

    disclaimer_xda.png

    I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please make sure you read and understand everything written in the post before flashing it! YOU are choosing to make these modifications and must be sure of what it does.

    requisitos_xda.png

    Only for unlocked Bootloader
    The unlock system doesn't allow WOS (Watch Operating System) 3.0 ROM versions yet, so you need to use any other valid WOS 2.0 ROM version like 2.6.4.1 or 2.0.43.1.​
    Supported devices: A1801 (Chinese) and A1811 (English)
    Properly installed ADB and Fastboot drivers as system wide

    Watch battery +40% (50% recommended)

    info_xda.png

    For anyone interested on installing Stock/Original English Firmware with OTA updates.

    credits_xda.png

    [MENTION]Neur_User[/MENTION] for PACEfied, STRATOSfied projects and other stuff
    [MENTION]Cracklydisc[/MENTION] for AmazIT, StratOS projects and other stuff
    Capara [MENTION]1mmortal[/MENTION] for his great support and collaboration
    @Nacken and @To+ for collaborating

    installation.png

    1. Connect the watch to your PC
    2. Unzip the the folder
    3. Run flash_US.bat file for English interface (Don't do it as Administrator since is known to cause issues)
    4. Wait to the end of the process and don't touch anything
    Alternative firmware and OTA installers since v3.2.6.0. Check for More info link of Downloads section.

    ********************************************************
    US Verge 3.2.2.0 Stock Firmware Installer by Saratoga
    ********************************************************
    0. Rebooting adb server
    *************************
    *****************************
    1. Connect the watch to PC
    *****************************
    *******************************
    2. Rebooting to Fastboot mode
    *******************************
    ****************************
    3. Checking the connection
    ****************************
    ****************************
    4. Booting modded recovery
    ****************************
    < waiting for any device >
    Downloading 'boot.img' OKAY [ 0.463s]
    booting FAILED (status read failed (Too many links))
    Finished. Total time: 1.562s
    ***********************************
    5. Waiting connection in Recovery
    ***********************************
    ******************
    6. Copying files
    ******************
    boot.img: 1 file pushed. 7.1 MB/s (9437184 bytes in 1.267s)
    system.img.gz: 1 file pushed. 4.9 MB/s (332793308 bytes in 65.424s)
    md5s.txt: 1 file pushed. 0.1 MB/s (91 bytes in 0.001s)
    flash_rom.sh: 1 file pushed. 0.4 MB/s (458 bytes in 0.001s)
    **************************
    7. Firmware installation
    **************************
    Validating images
    boot.img: OK
    system.img.gz: OK
    Starting to flash now. DO NOT TURN OFF OR REMOVE THE USB CABLE!
    Flashing boot.img
    2304+0 records in
    2304+0 records out
    9437184 bytes (9.0MB) copied, 1.651994 seconds, 5.4MB/s
    Flashing system.img
    210944+0 records in
    210944+0 records out
    864026624 bytes (824.0MB) copied, 101.353872 seconds, 8.1MB/s
    Finished
    *******************
    8. Removing files
    *******************
    **************
    9. Rebooting
    **************
    ***********************************
    10. Changing language to English
    ***********************************
    List of devices attached
    d41e250a device

    ***************************************************
    Stock Recovery and Bootloader installation process
    ***************************************************
    ********************************
    11. Rebooting to Fastboot mode
    ********************************
    ***************************
    12. Booting temporal root
    ***************************
    < waiting for any device >
    Downloading 'boot.img' OKAY [ 0.373s]
    booting FAILED (status read failed (Too many links))
    Finished. Total time: 1.426s
    *******************
    13. Copying files
    *******************
    install_recovery.sh: 1 file pushed. 0.1 MB/s (687 bytes in 0.005s)
    recovery.img: 1 file pushed. 2.0 MB/s (16777216 bytes in 8.153s)
    u-boot-with-spl-mbr-gpt.bin: 1 file pushed. 2.9 MB/s (964968 bytes in 0.312s)
    *****************************
    14. Flashing Stock recovery
    *****************************
    ============= STOCK Installer ===============
    Done. OTA updates should now work.
    *************************
    15. Flashing Bootloader
    *************************
    1884+1 records in
    1884+1 records out
    964968 bytes (942.4KB) copied, 0.131429 seconds, 7.0MB/s
    ********************
    16. Removing files
    ********************
    ***************
    17. Rebooting
    ***************
    ************
    18. Finish
    ************
    Presione una tecla para continuar . . .

    downloads_xda.png


    donate.png

    If you like my work you can buy me a beer here
    7
    US Verge 3.2.0.7 Stock Official Firmware Installer

    US Verge 3.2.0.7 Stock Official Firmware Installer
    Anyone who already installed previous 3.2.0.5 version has to install this version in order to receive official OTA updates.

    Downloads
    US Verge 3.2.0.7 Stock Official Firmware with fixed OTA updates

    Changelog
    - New languages added: Spanish and Russian
    - Added sports item: skipping rope
    - Add dynamic watchface: Salkan
    - New sports mode automatic detection, currently supports running and walking.
    - New raised wrist menu and its automatic time control
    - Phone application UI optimization
    - Bug fixes


    Thanks to @1mmortal @Nacken @to+ for collaborating.
    5
    Manual Installation Method

    Manual Installation Method

    Introduction
    Here I will explain how to install the firmware using a command window or any other terminal.

    The requirements are the ones stated in Post #1.

    Unbrick
    If your watch is stuck on Amazfit A logo and it doesn't boot, you will need to boot into fastboot manually using the button trick based on this thread:
    1. Watch always connected into PC
    2. Start with same steps of pushing-releasing the button as the video guide
    3. But, when screen goes off, count until "6 mississippis" while screen is off and then release the button, it should be done before Amazfit logo shows
    4. Push the button again to enter fastboot mode
    5. Check fastboot connection as stated on Step #3
    5.1 If fastboot devices command doesn't work and you get waiting for device string, that happened to me, disconnect the watch and reconnect to PC again​

    Now, download and unzip this UNBRICK file, and run UNBRICK_US.bat if you are on Windows PC, or just starting on Step #3 of the manual commands.

    Manual commands
    On your terminal, go to the path where all the files were unzipped and you are good to go.

    Manual command installation
    You can copy and paste all needed commands.

    Firmware installation
    1. Connect the watch to the PC and check the connection with the watch
    Code:
    [COLOR="Blue"]adb devices[/COLOR]
    Output (or similar)
    Code:
    List of devices attached 
    9dee1d33        device

    2. Reboot in fastboot mode
    Code:
    [COLOR="blue"]adb shell reboot bootloader[/COLOR]

    3. When the watch reboots in fastboot mode, check the connection with the watch
    Code:
    [COLOR="blue"]fastboot devices[/COLOR]
    Output (or similar)
    Code:
    0123456789      fastboot

    4. Boot the modded recovery
    Code:
    [COLOR="blue"]fastboot boot recovery-mod.img[/COLOR]
    Output (or similar)
    Code:
    downloading 'boot.img'... 
    OKAY [  0.426s] 
    booting... 
    FAILED (status read failed (Too many links)) 
    finished. total time: 1.303s

    5. Wait until you get a triangle with an exclamation mark (!) in your watch

    6. Copy the files to the watch (it may take upto a minute)
    Code:
    [COLOR="blue"]adb push boot.img /data/media/0/ 
    adb push system.img.gz /data/media/0/ 
    adb push md5s.txt /data/media/0/ 
    adb push flash_rom.sh /data/media/0/[/COLOR]
    Output (or similar)
    Code:
    adb push boot.img /data/media/0/ 
    7546 KB/s (9437184 bytes in 1.221s) 
    
    adb push system.img.gz /data/media/0/ 
    7194 KB/s (228153632 bytes in 30.969s) 
    
    adb push md5s.txt /data/media/0/ 
    88 KB/s (91 bytes in 0.001s) 
    
    adb push flash_rom.sh /data/media/0/ 
    297 KB/s (458 bytes in 0.001s)

    7. Start Firmware installation (it may take up to 2 minutes)
    Code:
    [COLOR="blue"]adb shell sh /data/media/0/flash_rom.sh[/COLOR]
    Output (or similar)
    Code:
    Validating images 
    boot.img: OK 
    system.img.gz: OK 
    Starting to flash now. DO NOT TURN OFF OR REMOVE THE USB CABLE! 
    Flashing boot.img 
    2304+0 records in 
    2304+0 records out 
    9437184 bytes (9.0MB) copied, 0.953804 seconds, 9.4MB/s 
    Flashing system.img 
    210944+0 records in 
    210944+0 records out 
    864026624 bytes (824.0MB) copied, 89.945101 seconds, 9.2MB/s 
    Finished

    8. We have already installed the firmware, now delete installation files form the watch
    Code:
    [COLOR="blue"]adb shell rm /data/media/0/boot.img 
    adb shell rm /data/media/0/system.img.gz 
    adb shell rm /data/media/0/md5s.txt 
    adb shell rm /data/media/0/flash_rom.sh[/COLOR]

    9. Reboot the watch
    Code:
    [COLOR="blue"]adb reboot[/COLOR]

    10. When the splash screen is passed and the bootanimation starts, set your watch to English language
    Code:
    [COLOR="blue"]adb shell setprop persist.sys.language en  
    adb shell setprop persist.sys.country US[/COLOR]

    Stock recovery installation process

    11. Reboot in fastboot mode
    Code:
    [COLOR="blue"]adb shell reboot bootloader[/COLOR]

    12. Boot temporal root
    Code:
    [COLOR="blue"]fastboot boot boot-US-adb-root.img[/COLOR]
    Output (or similar)
    Code:
    downloading 'boot.img'...
    OKAY [  0.349s]
    booting...
    FAILED (status read failed (Too many links))
    finished. total time: 1.206s

    13. Copy stock recovery files to the watch
    Code:
    [COLOR="blue"]adb push install_recovery.sh /data/media/0/
    adb push recovery.img /data/media/0/[/COLOR]
    Output (or similar)
    Code:
    [100%] /data/media/0/install_recovery.sh
    [100%] /data/media/0/recovery.img

    14. Run the recovery installation script
    Code:
    [COLOR="blue"]adb shell cd /data/media/0/; sh install_recovery.sh[/COLOR]
    Or if above command doesn't work, do it in 2 commands
    Code:
    [COLOR="blue"]adb shell cd /data/media/0/
    adb shell sh install_recovery.sh[/COLOR]
    Output (or similar)
    Code:
    ============= STOCK Installer ===============
    Flashing recovery...
    4096+0 records in
    4096+0 records out
    16777216 bytes (16.0MB) copied, 2.461221 seconds, 6.5MB/s
    Done. OTA updates should now work.

    15 . Delete stock recovery installation files
    Code:
    [COLOR="blue"]adb shell rm /data/media/0/install_recovery.sh 
    adb shell rm /data/media/0/recovery.img [/COLOR]

    16. Reboot the watch
    Code:
    [COLOR="blue"]adb reboot[/COLOR]

    17. Finish.

    Go to Amazfit app and update to latest version.

    Some extra useful commands
    Wipe dalvik/cache
    Code:
    [COLOR="blue"]adb shell reboot bootloader
    fastboot erase cache
    fastboot reboot[/COLOR]

    Do a Factory Reset (You will lose all the data in your watch. Unpair the watch from Amazfit app while doing this?
    Code:
    [COLOR="Blue"]adb shell reboot bootloader
    fastboot erase data
    fastboot erase cache
    fastboot reboot[/COLOR]
    3
    Reserved 1

    Reserved 1