G2x LCD Backlight bleed issue, pretty bad [pic]

[xguntherc]

Looks like this is going to be a larger issue than I thought. Major Manufacturer defect it sounds like. Engadget mentioned it on test unit.

Android 2.2 has a white notification bar so people don't and wont notice it, but boot screen, games, or video's with black it is noticeable and is NOT acceptable. Android 2.3 black notification bar you'd see it every time you look at phone.

I just got my brand new G2x today, and noticed this in the first 10 seconds. I'll be getting it replaced asap. Sadly can't do in store replacement cuz ordered online, different systems. So I have to wait for another to come in the mail.

http://yfrog.com/h4ey8fmj
This is during a video, that is WAY to much, it is also on the bottom of same side, but not as bad. So for those that cant tell, both right and left of the top of the phone has bleeding


MyTouch4G left, and the G2x with bleed on right!

 

[jlevy73]

Not good at all.

 

[TimTim12]

I have this problem as well, hopefully the replacement unit doesn't have the same issue :/

 

[azrowdydog]

I have the same problem. Replacement units plus brick and mortar launch I smell backordered

 

[xguntherc]

Called store and store purchases can be replaced, but if you bought online then you must go through online for the new one. I might just go buy one in store tomorrow, and return my online purchase. lol.

Instead of waiting for a replacement to come in the mail.. this is BS though, they had plenty of time to check for these sort of things.

 

[xguntherc]

Both right and left have it when in portrait. So holding the phone for daily use, you can't see it, but on the top, both sides have pretty bad bleeding, the left (not in picture) is not as bad, but very close. overall this is terrible to see happening on such an amazing device. All the excitement I had coming home to open this, went to **** within 10 seconds when I saw that on boot screen.

uhhh.

Update, I can't even adjust my screen brightness, the option is greyed out on my phone. Anyone else with that problem?
Here is another shot using the app called DRAW!, screen goes black and you can draw on it, check out the difference.

MyTouch 4G on left, G2x on right. lol.

 

[chong81]

Update, I can't even adjust my screen brightness, the option is greyed out on my phone. Anyone else with that problem?

That happened on mine when I skipped the setup wizard (hit "Exit") during the first bootup.

 

[ericc191]

This is not good...

 

[nate420]

Calling T-Mobile about this **** tomorrow..... vibrant problems to sgs4g problems now this!?

Sent from my LG-P999 using XDA App

 

[drleospaceman]

Try exchanging it.

 

[JHaste]

A little part of me died when i saw this issue... I am going in the store early tomorrow... guess i have to take a hoodie to create a dark environment and check for bleeding... did this happen right away like out of the box or after a few reboots and such?

 

[EtherealRemnant]

I have a SLIGHT backlight bleed (not really noticeable) on the top left and even less on the bottom left - however, this doesn't affect the usability of the phone and I think you're just picking things to slam the G2x on. NO PHONE IS EVER PERFECT! Get over your nitpicking and move on or go to another phone - pretty much guaranteed that whatever replacement you get is going to have the same issues. End of story. Deal with it and move on (it only really affects blacks anyway) or go to another phone.

 

[pychobj2001]

I have a SLIGHT backlight bleed (not really noticeable) on the top left and even less on the bottom left - however, this doesn't affect the usability of the phone and I think you're just picking things to slam the G2x on. NO PHONE IS EVER PERFECT! Get over your nitpicking and move on or go to another phone - pretty much guaranteed that whatever replacement you get is going to have the same issues. End of story. Deal with it and move on (it only really affects blacks anyway) or go to another phone.

Or just wait for the SGS2 which might have an unlocked boot loader but will never get source when CM8 w/ 2.4 comes out and it's a whirlwind of hating samsung like w/ my sgs vibrant........i'll stick w/ LG maybe they will release source much faster idk, i think i can deal w/ backlighting bleeding as long as it's minimal and it's not insane yuck....i doubt it will be...will see...

 

[EtherealRemnant]

Or just wait for the SGS2 which might have an unlocked boot loader but will never get source when CM8 w/ 2.4 comes out and it's a whirlwind of hating samsung like w/ my sgs vibrant........i'll stick w/ LG maybe they will release source much faster idk, i think i can deal w/ backlighting bleeding as long as it's minimal and it's not insane yuck....i doubt it will be...will see...

What people don't understand is that EVERY LCD WILL HAVE BACKBLEED. Its just part of the process. But compare a Captivate with SAMOLED side by side with the G2x and you'll quickly notice that the colors on the G2x are much more realistic than the Captivate/SGS and on top of that, SAMOLED integrates a pentile matrix display which essentially cuts the actually visible resolution in half in comparison to the IPS-LCD that the G2x utilizes. I can actually see the pixels on my Captivate - I can NOT see them on my G2x because it uses an LCD. I'm quite happy with my G2x so far - hell my roommate was playing NFS for 2 hours and my battery went down 20% - my Cap can't even run the same APK (I rooted and installed it on the Cap - frame rate was abysmal - everyone says the PowerVR 540 is a better chip than the nVidia but the fact of the matter is that nVidia has a lot of hold in the industry due to their desktop presence and that makes a huge dent in the other chips - nVidia chips are easier to program for and as time goes on (Ice Cream for example), only then will the full power of these chips actually come to light.

 

[diablos991]

What people don't understand is that EVERY LCD WILL HAVE BACKBLEED. Its just part of the process. But compare a Captivate with SAMOLED side by side with the G2x and you'll quickly notice that the colors on the G2x are much more realistic than the Captivate/SGS and on top of that, SAMOLED integrates a pentile matrix display which essentially cuts the actually visible resolution in half in comparison to the IPS-LCD that the G2x utilizes. I can actually see the pixels on my Captivate - I can NOT see them on my G2x because it uses an LCD. I'm quite happy with my G2x so far - hell my roommate was playing NFS for 2 hours and my battery went down 20% - my Cap can't even run the same APK (I rooted and installed it on the Cap - frame rate was abysmal - everyone says the PowerVR 540 is a better chip than the nVidia but the fact of the matter is that nVidia has a lot of hold in the industry due to their desktop presence and that makes a huge dent in the other chips - nVidia chips are easier to program for and as time goes on (Ice Cream for example), only then will the full power of these chips actually come to light.

My HD7 has absolutely no bleed and it's an LCD...

 

[sikkboy626]

Screen flickering???

Ok, as a fellow early adopter, I too have the LCD bleeding problem. However, I'm noticing another problem. I put the screen to "automatic brightness" mode, which causes it to flicker. I understand that different lighting changes the brightness, but not like this. The screen goes light to dark and back again several times in the same light at the same angle. I'm thinking maybe it could be an issue with just my phone. Anyone else?

 

[jimbo831]

Ok, as a fellow early adopter, I too have the LCD bleeding problem. However, I'm noticing another problem. I put the screen to "automatic brightness" mode, which causes it to flicker. I understand that different lighting changes the brightness, but not like this. The screen goes light to dark and back again several times in the same light at the same angle. I'm thinking maybe it could be an issue with just my phone. Anyone else?

My Nexus always did this as well. I think this is more a problem with Android and adjusting the brightness too frequently based on small changes in light as opposed to looking for averages over a minute or so.

Luckily CyanogenMod 7 has incorporated several manual adjustments to how often this sensor changes your backlight and it makes a huge difference. Prior to that, I always just used manual backlight adjustment because it is pretty annoying.

 

[xguntherc]

I'm not nitpicking.. lol I can't believe people see that and think it is acceptable. you will see that everytime you look at the phone with Android 2.3 or any black bar mod..

I've heard from many that had this issue, and MANY that have zero bleed, so I will be replacing it to see if it is any better.

 

[jrwingate6]

Ok, as a fellow early adopter, I too have the LCD bleeding problem. However, I'm noticing another problem. I put the screen to "automatic brightness" mode, which causes it to flicker. I understand that different lighting changes the brightness, but not like this. The screen goes light to dark and back again several times in the same light at the same angle. I'm thinking maybe it could be an issue with just my phone. Anyone else?

I would just use manual brightness anyway. Not a lot of people know this but keeping your screen brightness set to automatic will drain your battery faster than running it at full brightness. It's been tested on multiple Android devices.

 

[paxton]

Also have the bleed issue, has anyone heard if LG or Tmo have acknowledged the problem?