**G4 DUAL SIM models - H818P / H818N (UPDATED W/ ROOT + XPOSED works!) **

Search This thread

roosta

Senior Member
Oct 26, 2010
688
585
Melbourne
*EDIT* UPDATED JANUARY 2016, =ROOT & XPOSED= work on all dual sim variants!

xxx NO ROOT FOR MM - ANDROID MARSHMALLOW WORKING YET! READ THIS THREAD! xxx


Thank you to all contributors. We topped 200 PAGES! I'll continue to update this OP to link users to various parts of this thread for other users/XDA browsers to quickly find relevant information.


H818P / H818N IS ROOTED!
It works and it's pretty safe...jsut follow the steps and READ everything!
http://xdaforums.com/showpost.php?p=62075670&postcount=381
Also available there are STOCK IMAGES on various softwares 10c, 10d, 10e (etc) PRE-ROOTED and ready to flash using those instructions.

Have ROOT? Here's how to DELETE and EDIT the UI sounds on G4:
http://xdaforums.com/showpost.php?p=62089780&postcount=418

Here's a guide to installing Xposed framework (No unlocked bootloader or custom recovery is needed, just root!)
http://xdaforums.com/showpost.php?p=62397758&postcount=606

AT TIME OF THIS POST UPDATE - NEITHER H818P nor H818N SUPPORT **SIMULTANEOUS** 3G/4G CONNECTIONS ON BOTH SIMS AT THE SAME TIME. ONE SIM ONLY! Keep reading below.

CONFIRMED:* H818P Does not work on Band 28 (700Mhz)... only Band 17. This has been confirmed by LG UAE. See my post here: http://xdaforums.com/showpost.php?p=62204877&postcount=533


* May 2015: LG announce at least two G4 *DUAL SIM* phones to be released with their latest flagship single-sim model to be released simultaneously (or within 1 month) after most market single-SIM release dates. The 2 most common models areH818P (Ukraine, Thailand, Malaysia, Indonesia, UAE)] and the H818N (Hong Kong, China)

* (CONFIRMED) H818P model supports 3G/4G data connection on SIM1...It is ALSO supported on SIM2 (provided SIM 1 is set to 'GSM only' (or vice versa). It can be a bit tricky for some to get it working, here's how to do it: http://xdaforums.com/showpost.php?p=61621397&postcount=165 You can also see the functionality for BOTH sims from a user screenshots HERE: http://xdaforums.com/showpost.php?p=61115881&postcount=49

* (CONFIRMED) H818N model supports 3G/4G data connection on BOTH SIM1 & SIM2. Thanks to @Neutrality here: http://xdaforums.com/showpost.php?p=61674683&postcount=188 If you cannot enable LTE/4G on SIM 2, you are likely using an old software version (v10c or earlier) meaning you will need to access the hidden menu from the dialler. Open the phone dialler, type in 277634#*# suggested by @Syrop on page 18. who STEPS you through activation: http://xdaforums.com/showpost.php?p=62100690&postcount=460. If you have v10d, the option to choose 3G/4G on SIM2 should be readily available in normal menus. See @kanzone s post here: http://xdaforums.com/showpost.php?p=62307988&postcount=572 and the one above it.

* Out of box, wireless charging is NOT supported on DUAL SIM models, as SIM2 is roughly in the position where the contact pins are. NFC capability is retained.

* H818P supports 4G LTE band 17 which is 700Mhz (not not Australia/NZ and other band 28 countries on 700Mhz). H818N does not support 700. @bahamot_zero confirms on page 2 with sticker/box image: Same with @Icewanted page 4
http://xdaforums.com/showpost.php?p=61010603&postcount=19 and http://xdaforums.com/showpost.php?p=61055401&postcount=34

* H818P USER MANUAL - LG OFFICIAL (English from page 367 onwards), 34MB PDF:
https://dl.dropboxusercontent.com/u/90982755/LG-H818P_CIS_UG_Web_V1.0_150529.pdf
* Open source code for H818 dual SIMs from LG:
http://opensource.lge.com/osSch/list?types=ALL&search=H818

RoOSTA
 
Last edited:

akyp

Senior Member
Mar 30, 2011
196
70
Supported bands of the H815T (single SIM model sold in Hong Kong) and H818N (dual SIM):

LG G4 H815T 頻段資料

- 單卡版本 MicroSIM
- 支援 VoLTE
- 支援 4G Cat 6 (Carrier Aggreation) 最高 300Mbps
- 支援 FDD-4G LTE 頻段: B1 (2100)、B3 (1800)、B4 (1700/2100 AWS)、B5 (850) 、B7 (2600)、B8 (900)、B17 (700) 、B28 (700 TW) 
- 支援 TDD-4G LTE 頻段: B40 (2300)
- 支援 3G WCDMA : 850 / 900 / 1900 / 2100
- 支援 2G GSM 四頻 850 / 900 / 1800 / 1900

LG G4 H818N 頻段資料
- 雙卡版本 MicroSIM
- 4G / 3G / 2G + 2G 雙卡雙待,人手轉換 SIM
- 支援 VoLTE
- 支援 FDD-4G LTE 頻段: B1 (2100)、B3 (1800)、B7 (2600)
- 支援 TDD-4G LTE 頻段: B38 (2600 CMCC)、B39 (1900 CMCC)、B41 (2600 Unicom)、B40 (2300)
- 支援 3G WCDMA : 850 / 900 / 1900 / 2100
- 支援 3G TD-SCDMA : 1900 / 2100
- 支援 2G GSM 四頻 850 / 900 / 1800 / 1900

Also notable is the H818N does not support Cat. 6 LTE and wireless charging, if any of those matter to you. Both models also differ very slightly in dimensions so it remains to be seen if accessories are compatible with each other.
 
Last edited:

paulie72

Senior Member
Jul 31, 2009
65
10
I pre ordered the dual sim version (H818P) i will have it on the 28th of may. Including battery pack and 64gb sd card.
 
  • Like
Reactions: zstainless

zstainless

New member
Dec 31, 2014
1
0
Will be very interested to hear back from you

- also is there an online shop you can give us the URL , will yours be unlocked ?
I am in Australia but would like to order in Indonesia too

I pre ordered the dual sim version (H818P) i will have it on the 28th of may. Including battery pack and 64gb sd card.
 

paulie72

Senior Member
Jul 31, 2009
65
10
I ordered it at local LG Shop in Mall Ambasador. It is unlocked. You can check here https://www.blibli.com/preorder-ocb...clusive-battery-kit-sd-card-64-gb-474317.html

http://www.bhinneka.com/page/pbr150500008/pre-order_lg_g4.aspx?ref=fp_big_std_a_1

---------- Post added at 03:32 AM ---------- Previous post was at 03:29 AM ----------

Supported bands of the H815T (single SIM model sold in Hong Kong) and H818N (dual SIM):

LG G4 H815T 頻段資料

- 單卡版本 MicroSIM
- 支援 VoLTE
- 支援 4G Cat 6 (Carrier Aggreation) 最高 300Mbps
- 支援 FDD-4G LTE 頻段: B1 (2100)、B3 (1800)、B4 (1700/2100 AWS)、B5 (850) 、B7 (2600)、B8 (900)、B17 (700) 、B28 (700 TW) 
- 支援 TDD-4G LTE 頻段: B40 (2300)
- 支援 3G WCDMA : 850 / 900 / 1900 / 2100
- 支援 2G GSM 四頻 850 / 900 / 1800 / 1900

LG G4 H818N 頻段資料
- 雙卡版本 MicroSIM
- 4G / 3G / 2G + 2G 雙卡雙待,人手轉換 SIM
- 支援 VoLTE
- 支援 FDD-4G LTE 頻段: B1 (2100)、B3 (1800)、B7 (2600)
- 支援 TDD-4G LTE 頻段: B38 (2600 CMCC)、B39 (1900 CMCC)、B41 (2600 Unicom)、B40 (2300)
- 支援 3G WCDMA : 850 / 900 / 1900 / 2100
- 支援 3G TD-SCDMA : 1900 / 2100
- 支援 2G GSM 四頻 850 / 900 / 1800 / 1900

Also notable is the H818N does not support Cat. 6 LTE and wireless charging, if any of those matter to you. Both models also differ very slightly in dimensions so it remains to be seen if accessories are compatible with each other.
Do you know the 4G frequencies for the H818P? I thought 1800,2100 and 2600.
 
Last edited:
  • Like
Reactions: drdino

lurkindoc

Member
Oct 17, 2010
14
0
LG G4 *DUAL SIM* models - H818P and H818N

i am looking at buying one of these dual sims units
is there any websites that ship to the uk ?
 

lurkindoc

Member
Oct 17, 2010
14
0
LG G4 *DUAL SIM* models - H818P and H818N

Oh well looks like I'm going to have to wait and hope the dual sim version comes to uk
 

roosta

Senior Member
Oct 26, 2010
688
585
Melbourne
Supported bands of the H818N (dual SIM):

- 雙卡版本 MicroSIM
- 4G / 3G / 2G + 2G 雙卡雙待,人手轉換 SIM
- 支援 VoLTE
- 支援 FDD-4G LTE 頻段: B1 (2100)、B3 (1800)、B7 (2600)
- 支援 TDD-4G LTE 頻段: B38 (2600 CMCC)、B39 (1900 CMCC)、B41 (2600 Unicom)、B40 (2300)
- 支援 3G WCDMA : 850 / 900 / 1900 / 2100
- 支援 3G TD-SCDMA : 1900 / 2100
- 支援 2G GSM 四頻 850 / 900 / 1800 / 1900

Also notable is the H818N does not support Cat. 6 LTE and wireless charging, if any of those matter to you. Both models also differ very slightly in dimensions so it remains to be seen if accessories are compatible with each other.

Yes that much we know from the GSM Arena website, but not even that is all too comforting, especially when you consider this website and their presumptions on supported bands:

http://pdadb.net/index.php?m=specs&id=8051&view=1&c=lg_g4_h818p_lte-a_lg_p1

What you are forgetting is the other dual SIM model ... the H818P? On LG's UAE website, so such specsw are even listed!

Does anyone know of the G4 dual sim (HOPING it's compatible with 700MHz 4g LTE band FDD) is available to order yet from a reputable international seller, or is it still not available?

Thanks
RoOSTA
 
Last edited:

roosta

Senior Member
Oct 26, 2010
688
585
Melbourne
If H818P users (UAE, Indonesia, Ukraine, Thailand etc) can post an IMAGE of their phone and the STICKER on the box confirming model number and compatable MHz bands, that would be appreciated.

Paulie72 I was under the impression vendors may start to receive this stock BY 28th May. Have you been told it will be in your HANDS by then?

RoOSTA
 
Last edited:

nodymoha

Member
Oct 16, 2012
44
5
If H818P users (UAE, Indonesia, Ukraine, Thailand etc) can post an IMAGE of their phone and the STICKER on the box confirming model number and compatable MHz bands, that would be appreciated.

Paulie72 I was under the impression vendors may start to receive this stock BY 28th May. Have you been told it will be in your HANDS by then?

RoOSTA

I am in Saudi Arabia, and LG announced that it will provide H818P (2 SIM Slots) with 64GB Micro SD Card.

Well, I have to wait until June 6, until it is officially released.

I hope I can get it sooner.
 
  • Like
Reactions: sameer_khojla

paulie72

Senior Member
Jul 31, 2009
65
10
If H818P users (UAE, Indonesia, Ukraine, Thailand etc) can post an IMAGE of their phone and the STICKER on the box confirming model number and compatable MHz bands, that would be appreciated.

Paulie72 I was under the impression vendors may start to receive this stock BY 28th May. Have you been told it will be in your HANDS by then?

RoOSTA
Yes it will be in stock on the 28th of May. I will make a photo of both then. I am going to pick it up on 28th in the morning local time Jakarta.
 

paulie72

Senior Member
Jul 31, 2009
65
10
Unfortunately the G4 is delayed so i hope to get it delivered tonight or tomorrow midday at our family residence.
 

bahamot_zero

Member
Jan 5, 2012
44
24
Here you go, photo courtesy of springfield from Indonesian forum.
 

Attachments

  • 142578_20150528012322.jpg
    142578_20150528012322.jpg
    87.5 KB · Views: 6,028

Top Liked Posts

  • There are no posts matching your filters.
  • 178
    ROOT IN 10 STEPS!

    I am borrowing most information/details from Team Codefire thread: http://xdaforums.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765

    Source files and contributors: Official credit goes to @Unjustified Dev , @thecubed , @autoprime , @actr0n , @somboons , @sriszone and @rtoh and @luongquang

    I'm only posting this because this guide has worked for me and I wanted to share with the community SPECIFIC instructions, not generic for "all other" G4s and summarising 2-3 threads here in the one post:

    PREPARATION:

    (I) Read, read, read! Read EVERYTHING. Do it TWICE. Make sure each step is understood. MAKE SURE you have the right LG USB drivers, too

    (II) To be on the safe side, I'd recommend 80% charge or more before attempting the following procedure.

    (III) Download "LG Root" here: http://d-h.st/uO8h then Unzip and open the contents somewhere on your PC. Eg: Desktop. set aside for the procedure.

    (IV) I take no official credit for root; just the "easy to follow" guide you are reading specifically designed for the H818P and H818N dual SIM phones. Hit the "THANKS" button if this has helped. It goes without saying, I take ZERO responsibility if you follow this guide and miss a step, a command and end up BRICKING your device. You assume all responsibility for turning your phone into a giant paperweight.

    INSTRUCTIONS:

    STEP 1: Go to settings > Security > Encryption. **MAKE SURE** Encryption is TURNED OFF. If you've never encrypted your phone before, do not worry and continue to STEP 2.

    STEP 2: Go to Settings > About Phone > Software Information and tap build number until you are presented with "You are now a developer". if you've already done this before - just Exit back to SETTINGS main screen; in Developer Options enable USB Debugging

    STEP 3: Download the relevant system .IMG file for your phone (It's zipped, so unzip it to your PC. Eg: Desktop). It shouldn't matter...but may I suggest downloading the SAME system file you are currently using? If you are running v10c on your H818P, I'd get v10c for H818P:

    H818P - v10c
    https://drive.google.com/file/d/0B5VdA2Fdke_gRXZ1cDBzSFo0Z1U/view?pli=1
    H818P - v10d
    https://www.androidfilehost.com/?fid=24052804347781803
    H818P - v10e
    https://drive.google.com/file/d/0B4pdCPNb_MSHM3MyeHAtN3piWlE/view?usp=sharing
    H818P - v10f
    http://mega.nz/#!7lYGDJ7Q!KxAUmBN9txZaa--2oBrukPs-yiMLEt9DbO2KlAx7Isw
    H818P - v10i
    https://drive.google.com/file/d/0B0Rc6DomLxEoSFZBNHZfNUxXZzQ/view?usp=sharing
    H818P - v10j
    https://drive.google.com/open?id=0B9n1l79VH73ARFEzWjFzdDJHMW8 (Thanks @Nobol)
    or try: https://mega.nz/#!gFdkmQ4C!-8FlTq7jiob9t8ocfJBdvUQ5yY-z1LxYsGHCCLqJ_Og (Thanks @grigoris_a)
    H818P - v10k
    https://drive.google.com/file/d/0B80mBMEP3HsRR3pMS09fTnBzX0k/view?pref=2&pli=1
    H818P - v10L
    Mirror 1: https://drive.google.com/file/d/0B80mBMEP3HsRcDF3VzJ5QkUzSkk/view?usp=sharing
    Mirror 2: https://drive.google.com/file/d/0B80mBMEP3HsRUDJkbUI3SFU2aXc/view?usp=sharing (higher compression)

    H818N - v10c
    https://mega.nz/#!9lFWXQYJ!bHrQ0x7s7Z_VjJLcvKnfu-vYNQszlS3y5Nd9lM-Ts5Q
    H818N - v10d
    http://pc.cd/2q0rtalK or https://drive.google.com/open?id=0B3IEC2sn2eUadEhMY3J6YWIwd1k
    H818N - v10e
    docs.google.com/uc?id=0B2ckSd1spsRNeXZKd1RmS2VDclk Thanks @bb3089
    H818N - v10f
    https://goo.gl/zQFv9N
    H818N - v10i
    If you have this phone/software running, please extract, inject root and POST it, I'll put it here!
    H818N - v10k
    If you have this phone/software running, please extract, inject root and POST it, I'll put it here!
    H818N - v10L
    If you have this phone/software running, please extract, inject root and POST it, I'll put it here!

    HAVE YOUR OWN 818P/818N .IMG? POST IT HERE AND I'LL UPDATE!
    NOTE: I can't/won't be manually rooting your stock IMG file rips. If you need to know RIP or create your own G4 stock .IMG file from your phone, see @somboons video tutorial here: https://youtu.be/M4s6wrpD2Gk


    STEP 4: Move the resulting "system.rooted.phonemodel.img" file to the root of your phone's internal storage (not external SD card) with MTP mode. **DO NOT** RENAME this file, or move it into any folders!

    STEP 5: Once this has been done, POWER OFF your phone normally and disconnect from PC. After LED stops blinking (OFF properly), Hold the UP VOLUME key and re-insert the USB cable from your PC to your phone. If done correctly, you should see DOWNLOAD MODE in small font in middle of the screen. it will then display another screen with text: FIRMWARE UPDATE (a USB logo) a warning to not unplug and a status bar at 0%.

    STEP 6: On a windows PC, Start a command prompt (Start > Run > cmd) and navigate to the unzipped contents folder of LG Root from STEP 3. If you don't know how to run command or understand it **STOP HERE** and google HOW TOs, as the wrong commands or lack of understanding/ignorance may hinder the process! (On my PC, the command prompt line after navigation to my unzipped folder looks like C:\Users\RoOSTA\Desktop\LG_Root\ ). Put this window aside for a moment...

    STEP 7: Let's verify the COM port your phone is connected to. Find the LG Root tools you downloaded in PREPARATION. Go into the folder and double click the file "ports.bat". Look for the COM number that corresponds to "DIAG1". **WRITE DOWN / REMEMBER THE COMM PORT NUMBER!** Let's assume it's COM4. Click any key/exit this window now...

    STEP 8: Let's continue now where we left off - following on from STEP 7 (in the command window where we see something similar to: C:\Users\RoOSTA\Desktop\LG_Root\ ) Here, copy/paste or type this command MAKING SURE THE RIGHT COMM NUMBER IS ENTERED: Send_Command.exe \\.\COM4

    STEP 9: You should see Author: blog.lvu.kr and SPECIAL COMMAND : ENTER, LEAVE on 2 lines followed by a hashtag (#). If you are up to this point, type id and press ENTER

    STEP 10: You should get back some text starting with "uid=(0)root gid=(0)root". If not, press CTRL-C, and repeat STEP 8 again (The application sometimes doesn't respond on the first command). If it worked for you, from here run the command below (copy/paste next to the # and press ENTER). NOTE: Only copy/paste the **CORRECT** code from the list below.

    If you've done this correctly, as soon as you've pressed ENTER, you'll see a blinking cursor, probably for a few minutes. Basically the pre-rooted system image you are FLASHING to your phone is being written, so it may take a few minutes. When complete, you should see #. If you see this, it's DONE! Type LEAVE and press ENTER. Your phone should then restart... Once it's rebooted and you'd like to verify, download ROOT CHECKER from the Play store, run the app and verify. Here's mine, it worked!

    ScreenHunter_94%20Jul.%2028%2019.12.jpg


    IMPORTANT AND DON'T FORGET:
    1. If you haven't done so already, disable OTA. Don't update until we know it's safe so your ROOT isn't affected thttp://xdaforums.com/g4/general/disable-ota-t3131493
    2. if you are wondering - YES, you can now delete the .IMG file from the root location on your G4, once you've completed STEP 10 (the whole process), completely, there's no need for the file there to take up space.

    Use this code in STEP 10 (same code for ALL other system files, just make sure our FILENAME matches!)
    dd if=/data/media/0/NAME-OF-ROOTED-IMAGE-FILE.img bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0

    If using your OWN system IMG file (one not in this thread), you basically need to MAKE SURE your system IMG file **matches** what is listed in the CODE above. You'll notice 10e and 10d above are basically identical codes with DIFFERENT FILE NAMES! That's the only change you need to make using your own file/s

    FYI you can follow this video on Youtube to get the same result, but NOTE: ***THE FILES NEEDED / COMMANDS ARE DIFFERENT***
    https://www.youtube.com/watch?v=mZM-zTi3eAA

    While ROOT is not yet support (SO DONT USE THESE FILES BELOW TO ROOT!) You can get Android Marshmallow ROMS for H818. *BIG* thanks @AmGaD-SaLaH
    H818p 20A ( Official Firmware ) ( Russian )
    https://drive.google.com/file/d/0B80mBMEP3HsRQUJaUDFHeE93a0E/view?usp=sharing
    H818p 20B ( Official Firmware ) ( Russian )
    https://drive.google.com/file/d/0B80mBMEP3HsRRl9xQjJtVEo1TkU/view?usp=sharing
    H818p 20C ( Official Firmware ) ( Russian ) (CIS) (LG Bridge)
    https://drive.google.com/file/d/0B80mBMEP3HsRdnV0YmliYmVRRFE/view?usp=sharing

    This post will *CONTINUE* being updated. Check back! Please hit "THANKS" button on this post if this has been of assistance to you... a 'thumbs up' in my OP on page 1 would also be appreciated!

    RoOSTA
    102
    *EDIT* UPDATED JANUARY 2016, =ROOT & XPOSED= work on all dual sim variants!

    xxx NO ROOT FOR MM - ANDROID MARSHMALLOW WORKING YET! READ THIS THREAD! xxx


    Thank you to all contributors. We topped 200 PAGES! I'll continue to update this OP to link users to various parts of this thread for other users/XDA browsers to quickly find relevant information.


    H818P / H818N IS ROOTED!
    It works and it's pretty safe...jsut follow the steps and READ everything!
    http://xdaforums.com/showpost.php?p=62075670&postcount=381
    Also available there are STOCK IMAGES on various softwares 10c, 10d, 10e (etc) PRE-ROOTED and ready to flash using those instructions.

    Have ROOT? Here's how to DELETE and EDIT the UI sounds on G4:
    http://xdaforums.com/showpost.php?p=62089780&postcount=418

    Here's a guide to installing Xposed framework (No unlocked bootloader or custom recovery is needed, just root!)
    http://xdaforums.com/showpost.php?p=62397758&postcount=606

    AT TIME OF THIS POST UPDATE - NEITHER H818P nor H818N SUPPORT **SIMULTANEOUS** 3G/4G CONNECTIONS ON BOTH SIMS AT THE SAME TIME. ONE SIM ONLY! Keep reading below.

    CONFIRMED:* H818P Does not work on Band 28 (700Mhz)... only Band 17. This has been confirmed by LG UAE. See my post here: http://xdaforums.com/showpost.php?p=62204877&postcount=533


    * May 2015: LG announce at least two G4 *DUAL SIM* phones to be released with their latest flagship single-sim model to be released simultaneously (or within 1 month) after most market single-SIM release dates. The 2 most common models areH818P (Ukraine, Thailand, Malaysia, Indonesia, UAE)] and the H818N (Hong Kong, China)

    * (CONFIRMED) H818P model supports 3G/4G data connection on SIM1...It is ALSO supported on SIM2 (provided SIM 1 is set to 'GSM only' (or vice versa). It can be a bit tricky for some to get it working, here's how to do it: http://xdaforums.com/showpost.php?p=61621397&postcount=165 You can also see the functionality for BOTH sims from a user screenshots HERE: http://xdaforums.com/showpost.php?p=61115881&postcount=49

    * (CONFIRMED) H818N model supports 3G/4G data connection on BOTH SIM1 & SIM2. Thanks to @Neutrality here: http://xdaforums.com/showpost.php?p=61674683&postcount=188 If you cannot enable LTE/4G on SIM 2, you are likely using an old software version (v10c or earlier) meaning you will need to access the hidden menu from the dialler. Open the phone dialler, type in 277634#*# suggested by @Syrop on page 18. who STEPS you through activation: http://xdaforums.com/showpost.php?p=62100690&postcount=460. If you have v10d, the option to choose 3G/4G on SIM2 should be readily available in normal menus. See @kanzone s post here: http://xdaforums.com/showpost.php?p=62307988&postcount=572 and the one above it.

    * Out of box, wireless charging is NOT supported on DUAL SIM models, as SIM2 is roughly in the position where the contact pins are. NFC capability is retained.

    * H818P supports 4G LTE band 17 which is 700Mhz (not not Australia/NZ and other band 28 countries on 700Mhz). H818N does not support 700. @bahamot_zero confirms on page 2 with sticker/box image: Same with @Icewanted page 4
    http://xdaforums.com/showpost.php?p=61010603&postcount=19 and http://xdaforums.com/showpost.php?p=61055401&postcount=34

    * H818P USER MANUAL - LG OFFICIAL (English from page 367 onwards), 34MB PDF:
    https://dl.dropboxusercontent.com/u/90982755/LG-H818P_CIS_UG_Web_V1.0_150529.pdf
    * Open source code for H818 dual SIMs from LG:
    http://opensource.lge.com/osSch/list?types=ALL&search=H818

    RoOSTA
    46
    How to install Xposed framework on DUAL SIM!

    **NOTE** and **REMEMBER** I, nor any other member credited in this thread take ANY responsibility if you BRICK YOUR phone! Again, you do this at your own risk!

    This guide was thrown together based on information from the following people: @tabp0le , @Chainfire , @romracer and @rovo89 + all other devs responsible for bringing us Xposed!

    Please hit the "Thanks!" button ont his post if this has helped you. Also, I'd appreciate the OP (post #1) be "Thanked" as well...it's been updated and refined for you, after all!

    PREPARATION:

    1) Download the following files:
    a) This file, or whatever the LATEST VERSION of SDK22 ARM64 version of Xposed: xposed-v74-sdk22-arm64-by-romracer-20150911.zip here: http://xdaforums.com/xposed/super-alpha-posted-permission-xposed-t3072979
    b) This file: XposedInstaller_3.0_alpha4 here: http://xdaforums.com/attachment.php?attachmentid=3383776&d=1435601440
    c) ON YOUR PHONE: Search for & install [root] Flashfire (by chainfire) from Playstore. You'll need v0.20 or v0.21 of the app https://play.google.com/store/apps/details?id=eu.chainfire.flash&ah=bC3qYEyuj-molYGD0kcf68coIng

    2) Make sure your phone is fully charged. Copy over the 2 downloaded files over to your phone (anywhere, suggest phones main root location)

    3) Before performing this method, disconnect phone from any cable or charger and here...we...go!

    4) If your phone DOES NOT HAVE ROOT successfully installed, then DO NOT PROCEED!

    ------------------------

    STEP 1: Browse to and open [root] Flashfire on your phone

    STEP 2: Tap the {+} button. Then "Flash .zip/OTA"

    STEP 3: Navigate to xposed-v71-sdk22-arm64-by-romracer-20150816.zip file on your phone, wherever you copied it to and tap on it

    STEP 4: If presented with an option "auto mount" DO NOT select it. No need to. Just hit the tick button above and you will return back to the main screen on [root] Fashfire

    STEP 5: Scroll down, or if you can see te FLASH button in red with a lightning bolt, tap that. If done correctly, your screen goes BLANK (black).

    DON'T WORRY! This is normal.

    I personally had to wait 9 minutes (at least) until my screen turned back on with "Loading..." showing up in the middle of th screen and then a CRAP LOAD of file names/paths unzipping and scrolling in the background. Just let it do its thing... the screen will go blank (black) again for ~7 minutes. A recovery screen pops up with some text at the bottom...then phone AUTOMATICALLY RESTARTS.

    The LG boot logo should show up for a few moments on my phone...then "Android is starting" with auto optimization taking place, where all your apps are optimised (This can take several minutes, depending on how many apps you have installed).

    STEP 6: If your phone boots successfully, navigate to your favourite file explorer app (such as Root Explorer) to the location you copied
    XposedInstaller_3.0_alpha4 file to. Tap on it to install (if you can't you need to go to settings and allow installation of apps from unknown sources). It will install almost instantly. Navigate to the Xposed app icon and open...you're done!

    Enjoy downloading certain dev files from within the Xposed app! Note: NOT ALL apps are supported, so be smart and install either (a) something you know works on this phone already, or (b) Go to the OP's support thread and see if it will work before downloading it! Better to be safe than sorry, right? Here's a list of apps working on the latest version (at time of this post UPDATE):

    http://xdaforums.com/g4/themes-apps/xposed-list-modules-currently-t3180217


    Please hit the "Thanks!" button ont his post if this has helped you. Also, I'd appreciate the OP (post #1) be "Thanked" as well.


    RoOSTA
    44
    H818P Support Post [Lollipop & Marshmallow] [ROOT]

    Finally guys :D Google drive links are here :laugh:
    P.S. : I will ONLY support my Model : H818p , Not H818n
    But you can still flash it to H818n it's Compatible

    Lollipop ------------> [H818][All Dual Sims Variants] [Rooted] [Root Available]
    Marshmallow -----> [H818][All Dual Sims Variants] [No Rooted] [Root Not Available]

    Important Applications
    Download 7z : ---> Here
    Download LG UP : ---> Here
    Download Flashfire 31 : ---> Here
    (OLD)Download Flashfire 24 : ---> Here

    FlashFire 24/31 ?

    V0.31
    Thanks to @ iiD4x Heads up
    it's super fast and compatible with our Dual sim Variants
    *Feel free to go back to 0.24 if you have problem with the latest update .
    ------------------------------------------------------------------------------
    V0.24
    It's the Compatible version with our LG G4 (H818) , This app is used to flash Zips to your phone .
    What I can use it for ?
    1- You can use it to Flash and install Xposed
    2- Flash any Mods created as Zip file
    3- Flash any zip file :D
    4-Image

    *This version was Edited to LG G4 Dual sim , To not ask you for updates from the Store anymore
    .
    *You still can download the FlashFire app from the store (To get the latest Features ) , it won't Conflict with This version

    How to use LG UP ?
    (Install DLL first then the LGUP app)
    1- Download the app , Also download KDZ file of your Desire
    2- Make sure your phone is Charged at least 80% (Just to be safe)
    3- Connect your phone to your PC using your cable , PC should Identify your phone
    4- Choose "Upgrade" Then choose the KDZ you Desire (Lollipop or Marshmallow) (H818p or H818n)
    5- After you Successfully Choose the KDZ file , Change your Selection to "Refurbish"
    6- Please note this , You can Choose "Upgrade" and keep it if you don't want to start fresh it will keep all your files intact / If you choose "Refurbish" all your files will be gone (Phone Format)
    7- Click "Start" , Wait for sometime , Your phone will restart , Leave it .
    8- Finally the phone will boot up to the Installation Wizard page , and LG UP will say 100% Done

    How to Extract ?

    1- Download [KDZ/Rooted Image]
    2- Extract the rar file [using winrar/zip/etc..]
    3- Open "Extract.exe" [Follow the instruction , Easy]
    4- wait for it [must have 5gb of free space for Rooted image / 1.8GB for KDZ] .
    5- Done ) , Enjoy
    (For Low speed/bandwidth people I created the Compressed file to save you time and traffic , So don't forget to Hit that thankS button )
    :D


    Lollipop Links
    Current Latest Version : 10L
    ------------------------------------------------------------------------------------------------------------------------
    H818p 10K ( Official Firmware ) (Using lg bridge ) ( UAE-AME )
    https://goo.gl/iqSWxk
    H818p 10K ( Rooted Image . thanks to the one and only @Ryuzawa :good: )
    https://goo.gl/TklHL1
    ------------------------------------------------------------------------------------------------------------------------
    H818p 10L ( Official Firmware ) (Using lg bridge )
    https://goo.gl/Z00tyR ( Philippines )
    https://goo.gl/j5q3PQ ( UAE-AME )

    H818p 10L ( Rooted Image)
    ( all the Credits goes to @Ryuzawa ) ( i've just uploaded 1 link and highly compressed one :) " )
    https://goo.gl/xEcNM1 (Normally Compressed 1.35GB)
    https://goo.gl/e7ll7N (Highly Compressed 1GB)
    ------------------------------------------------------------------------------------------------------------------------

    Marshmallow Links
    Current Latest Version : 20H
    ------------------------------------------------------------------------------------------------------------------------
    H818p 20A ( Official Firmware ) ( Russian )
    https://goo.gl/vAGtX6
    ------------------------------------------------------------------------------------------------------------------------
    H818p 20B ( Official Firmware ) ( Russian )
    https://goo.gl/fPWQQp
    ------------------------------------------------------------------------------------------------------------------------
    H818p 20C ( Official Firmware ) ( Russian ) (CIS) (LG Bridge)
    https://goo.gl/88uw0i
    H818p 20C ( Official Firmware ) (UAE-AME-XXX) (LG Bridge)
    https://goo.gl/NVzlhY
    "Includes"
    UAE [25/2/2015]
    IMG1 | IMG2 | IMG3 | IMG4
    RUS
    1- Battery has been improved
    2- Usability improvements
    3- Google patch
    4- Still Can't Format your SD-Card as Internal Memory
    :(
    ------------------------------------------------------------------------------------------------------------------------
    H818p 20D ( Official Firmware ) ( EURO) (EUR-XXX) (LG Bridge)
    https://goo.gl/0veDQx
    ------------------------------------------------------------------------------------------------------------------------
    H818p 20E ( Official Firmware ) (UAE-AME-XXX) (LG Bridge)
    https://goo.gl/4yCVYU
    "Includes" :
    * Phone usability and functionality has been further improved
    ------------------------------------------------------------------------------------------------------------------------
    H818p 20H ( Official Firmware ) (UAE-AME-XXX) (LG Bridge)
    goo.gl/39CeTW
    "Includes" :
    *Phone usability and functionality has been further improved
    *Software improvement and stability for apps
    ------------------------------------------------------------------------------------------------------------------------



    Rooting Guide ,
    Thanks to @ roosta (ONLY Lollipop 5.x V10K / V10L)
    download the root files from his post or the edited version from here
    STEP 1: Move the resulting "system.rooted.phonemodel.img" file to the root of your phone's internal storage (not external SD card) with MTP mode. **DO NOT** RENAME this file, or move it into any folders!

    STEP 2: Once this has been done, POWER OFF your phone normally and disconnect from PC. After LED stops blinking (OFF properly), Hold the UP VOLUME key and re-insert the USB cable from your PC to your phone. If done correctly, you should see DOWNLOAD MODE in small font in middle of the screen. it will then display another screen with text: FIRMWARE UPDATE (a USB logo) a warning to not unplug and a status bar at 0%.

    STEP 3: On a windows PC, Start a command prompt (Start > Run > cmd) and navigate to the unzipped contents folder of LG Root from STEP 3. If you don't know how to run command or understand it **STOP HERE** and google HOW TOs, as the wrong commands or lack of understanding/ignorance may hinder the process! (On my PC, the command prompt line after navigation to my unzipped folder looks like C:\Users\RoOSTA\Desktop\LG_Root\ ). Put this window aside for a moment...

    STEP 4: Let's verify the COM port your phone is connected to. Find the LG Root tools you downloaded in PREPARATION. Go into the folder and double click the file "ports.bat". Look for the COM number that corresponds to "DIAG1". **WRITE DOWN / REMEMBER THE COMM PORT NUMBER!** Let's assume it's COM4. Click any key/exit this window now...

    STEP 5: Let's continue now where we left off - following on from STEP 7 ,RUN Root.exe File , copy/paste or type this command MAKING SURE THE RIGHT COMM NUMBER IS ENTERED: Send_Command.exe \\.\COM4

    STEP 6: You should see Author: blog.lvu.kr and SPECIAL COMMAND : ENTER, LEAVE on 2 lines followed by a hashtag (#). If you are up to this point, type id and press ENTER

    STEP 7: You should get back some text starting with "uid=(0)root gid=(0)root". If not, press CTRL-C, and repeat STEP 8 again (The application sometimes doesn't respond on the first command). If it worked for you, from here run the command below (copy/paste next to the # and press ENTER). NOTE: Only copy/paste the **CORRECT** code from the list below.

    Step 8: Use this code for Rooting 10K / 10L upwards [Not Marshmallow]
    dd if=/data/media/0/rootedsystem.img bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0
    30
    LG H818N Indian Variant Running Marshmallow 'v20B kdz' using LGUP

    I have upgraded to V20B Marshmallow without a hitch.

    I've really worked hard to find the V20B kdz file.Thumbs is really appreciated if you like my work...!


    "NOTE : THE BELOW KDZ IS WORKING ON BOTH H818P AND H818N MODELS CONFIRMED"

    Download Link Of V20B kdz :

    https://drive.google.com/file/d/0B80mBMEP3HsRRl9xQjJtVEo1TkU/view

    Download Link for Latest LGUP software :
    https://mega.nz/#!MEQ2zLaI!6yj51L757cw-R_cm25lCdGMgFB9EBlMUXzitXan9n0s
    https://www.dropbox.com/s/yjh8nmcrr8hziot/LGUP_Install_Ver_1_14_3_8994DLL.rar?dl=0

    Download the Required files please find the attachment files.
    Firstly Please install the required LG Drivers for the phone then
    Step 1) Extract the rar file attached and install " LGUP_8994_DLL_Ver_0_0_3_23.msi " then install " LGUP_Install_Ver_1_14_3.msi ".
    Step 2) Connect the phone to pc and open LGUP then select the file H818N 20B kdz which is downloaded.
    Step 3) Select UPGRADE option then just click START wait for the process to complete.
    Step 4) After completion of whole process the phone will reboot and upgrade to Android 6.0 Marshmallow.
    Step 5) Please make a HARD RESET after the process.Please Do search how to HARD Reset.
    Step 6) Thats It your Done.

    Everything is working fine after HARD RESET.