[G800F/M/Y][ROM][7.1][NJH47F] LineageOS 14.1 for G800F/M/Y [Beta 19/08/2017]

Search This thread

vanticar

Member
Sep 17, 2011
20
1
Hi, Followed your setup instructions to the letter, cf-auto-root and twrp 3.0.0 all installed ok on stock ROM s5 mini g800f

Wiped Dalvik Cache, Cache, System and Data (after a few gapps fails I also wiped internal storage)

Installed ROM and Gapps fine

however on reboot / start as phone goes into andriod after load logo(s):-

several white boxs with google gapps 'stopped working' error - 'setup wizard', 'config updater', 'services framework', partner setup' , 'one time', 'contact sync'.

When all closed only setup wizard left, I have deleted setup wizard in /system/priv via twrp file manager. The others still fail therefore no google play store.

The ROM works fine if I do not install any gapps - I have booted it without gapps then installed gapps after installation /restart with same errors everytime.

can not seem to get any further,

I have tried 'pico' , 'nano' and 'full' opengapps for 7.1

can anyone help?

thank you for ROM
 
Last edited:

vanticar

Member
Sep 17, 2011
20
1

CherAlban

Member
Nov 30, 2014
39
21
Hannover

Panzerknakker

Senior Member
Jan 17, 2017
128
284
That build seems to break my bluetooth hands-free connection. When receiving a call, the car stereo mutes the audio, displays "call", but the audio stays on the handset.
CherAlban
Sorry for this, you might want to go back to hennymcc 's last supported version.
I just compile new nightlies from time to time and if they work for me and my wife I put them on androidfilehost.
The devs did a lot of fixes for bluetooth last weeks. But I don't use this feature, and can't debug it really.
 

CherAlban

Member
Nov 30, 2014
39
21
Hannover
You can try
lineage-14.1-20170920-UNOFFICIAL-kminilte.zip
https://www.androidfilehost.com/?fid=961840155545597312
lineage-14.1-20170920-UNOFFICIAL-kminilte.zip.md5sum
https://www.androidfilehost.com/?fid=817550096634801121

Sorry for this, you might want to go back to hennymcc 's last supported version.
I just compile new nightlies from time to time and if they work for me and my wife I put them on androidfilehost.
The devs did a lot of fixes for bluetooth last weeks. But I don't use this feature, and can't debug it really.

No need for excuses, I just reported my experience with your build.

Thanks for your work anyhow!

CherAlban
 
  • Like
Reactions: tibor8
Bug in "Edit VPN profile" dialogue

As a-dead-trousers already noticed I fixed the G800(F/...) model name problem and built a new release:
https://www.androidfilehost.com/?fid=673368273298979943

Changelog (19/08/2017):
  • SELinux policy update
  • Update to newest LineageOS sources

In this release when configuring a VPN connection with the dialogue "Edit VPN profile", it is impossible to check the item "Always ON VPN" at the end of because when I set it, the "SAVE" button greys out :( When unchecking, the "SAVE" button gets active again.

The VPN connection itself is functional, but unfortunately not always ON as I like to have.
 

Attachments

  • Screenshot_20171002-201633.png
    Screenshot_20171002-201633.png
    86.1 KB · Views: 267
  • Screenshot_20171002-201644.png
    Screenshot_20171002-201644.png
    82.5 KB · Views: 262

tibor8

Member
Oct 10, 2016
23
9
In this release when configuring a VPN connection with the dialogue "Edit VPN profile", it is impossible to check the item "Always ON VPN" at the end of because when I set it, the "SAVE" button greys out :( When unchecking, the "SAVE" button gets active again.

The VPN connection itself is functional, but unfortunately not always ON as I like to have.

Do you have lockscreen password set?
 
VPN and fingerprint issue

Do you have lockscreen password set?
Yes, of course. I had configured a fingerprint too for unlocking the phone,
but the fingerprint does not work anymore after I configured the VPN access. There is no fingerprint symbol on the lockscreen anymore :( even after configuring a new fingerprint.

In fact the fingerprint icon on the lockscreen only appears when waking up the phone with the home button. When I wake it up with the On/Off button only the padlock symbol appears. Then I have to wipe up from there and the number keypad appears. Instead of typing the pin code I wipe back down and the fingerprint symbol appears which allows me logging in with a previously recorded finger . . .
 
Last edited:

a-dead-trousers

Senior Member
Jul 28, 2016
501
1
191
Samsung Galaxy S5 Mini
Group SMS Error

Hi!

I know my problem has nothing to do with this ROM at all, but I don't know how to confirm this any other way:
With the last update of the Android Messages App (2.5.211) I'm not able to send a SMS to multiple receivers. Last week on 26th of September I had no problems and this week it's not working anymore. The update came out around 2nd of October. My carrier doesn't support MMS so I'm forced to use the mass SMS option (one SMS to each receiver) and this is not working anymore.
Can somebody who uses the Android Messages App from Google with this ROM please confirm this behaviour so I can file a bug report?
Thanks in advance.

wkr ADT
 
Last edited:

ATechnoHazard

Senior Member
Jun 11, 2015
120
228
Thane
Build error

Um I got a build error while building, with the following output. My hardware/ril is cloned properly, so what could be the cause?
Code:
ninja: error: '/home/amolele/android/ColtOS/out/target/common/obj/JAVA_LIBRARIES/sap-api-java-static_intermediates/
classes.jack', needed by '/home/amolele/android/ColtOS/out/target/common/obj/APPS/Bluetooth_intermediates/with-loca
l/classes.dex', missing and no known rule to make it
build/core/ninja.mk:151: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1
make: Leaving directory '/home/amolele/android/ColtOS'
 

Top Liked Posts

  • There are no posts matching your filters.
  • 59
    This is a LineageOS 14.1 ROM for the Exynos3470 based Samsung Galaxy S5 mini (G800F/G800M/G800Y).

    DO NOT USE IT FOR G800H OR YOU WILL BRICK YOUR DEVICE

    Although G800F and G800H share the same name they are not related in terms of hardware due to the different SoCs used (Exynos vs. Snapdragon).
    Hence please do not ask for support or ROMs for the G800H.

    Important note: It is possible that flashing this ROM can cause efs partition issues. Therefore it is strongly recommended to make a backup of your efs partition before flashing this ROM. This can be done via TWRP.

    Working features
    • HW accelerated GUI
    • Camera (pictures+video: Back+Front) (switching between camera and video-recording might crash the camera-app)
    • MTP storage
    • Flash Light
    • Bluetooth (A2DP, HFP, HID)
    • IR
    • Sound
    • SMS
    • Initiate and receive calls
    • Wifi
    • Mobile Data
    • USB-OTG (Keyboard, Mouse, USB-Audio, Mass-Storage)
    • NFC
    • Hardware sensors (Orientation, Compass, Proximity, Acceleration, Hall sensor, Step counter)
    • Light sensor (needed for auto-brightness)
    • Pulse sensor (preliminary and very inaccurate. Works with Apps like Kardiograph)
    • SD-Card as internal storage (new Android M feature)
    • GPS
    • Fingerprint scanner
    • SELinux

    Non-working features:

    Known issues:
    • Camera crashes when switching from camera to video. Use Google camera or Open camera to solve camera issues.
    • See the Bug Report section of this thread.

    Disclaimer:
    • You flash this image at your own responsibility. I am not responsible for any damage that might be caused by flashing this image (bricked device, lost data, ...)
    • Flashing this kernel image will trigger the KNOX counter, so your warranty will be void.
    • Applications that use KNOX (e.g. "Private Mode") might not work anymore when returning to the stock ROM, as the device is regarded as compromised. Do not flash this ROM if you need those applications.
    • The image is only for Exynos3470 based S5 Mini variants SM-G800F/M/Y.
    • It might be instable, crash your device, drain your battery, or even might damage your smartphone (e.g. if an USB-OTG device drains too much power)
    • Some users reported that their touch-screen stopped working permanently after some weeks of usage. For some user's (two at the moment including me) NFC stopped working permanently. Probably this issues are not related to this ROM as also many stock user's complain about hardware issues (random reboots, black screens, unresponsive touchscreen) but you have been warned.
    • Backup your data before flashing and check if the original firmware is present (e.g. at SamMobile)
    Before you start:
    • Backup your data, like call history, contacts, sms, WhatsApp messages, favourite app settings that are on internal and external sd (by using Titanium Backup or other apps available on PlayStore). At least all internal data will be lost in any case. If you have bad luck you might also loose data from your external sd card.

    Download:

    Install recovery:
    • Reboot your device into Download mode: turn off your device, then press Volume-Down + Home + Power button at the same time and release them.
    • Confirm the following warning message with the Volume-Up button.
    • Connect your device to your PC via USB
    • Make sure the device driver's are installed on your PC
    • Start Odin
    • In Odin select "PDA" (in newer versions: "AP") and select the recovery image (recovery.tar.md5)
    • Check that only "F. Reset Time" is set. "Auto Reboot" should be disabled to avoid a reboot into stock ROM.
    • Click on "Start": the recovery image should be flashed now. By flashing the recovery, your warranty will be void.
    • After the recovery flashing process was successful, power of your device, wait a few seconds and reboot into recovery mode (see instructions below).
    • Important: make sure not to boot into stock ROM, otherwise the stock ROM might remove the custom recovery again. If this happens, flash the recovery image again.

    Before you flash:
    • You need the latest TWRP recovery (see above). Otherwise TWRP might not be able to flash the ROM. This is because TWRP checks now if the device is "supported".
    • Wipe the device to avoid problems with remaining files from the old installation (see instructions below). This also applies if you already installed an older version of CM 14.1.

    Flash ROM:
    • Reboot into recovery mode (Press Volume-Up + Home + Power button)
    • If you come from a stock ROM, this is your opportunity to make a Backup of your phone(Backup, then select Boot, System, Data, then swipe to backup). Note that the recovery might fail to restore the backup when you want to go back to the stock ROM (for me it got stuck after a restore during boot. But the backup was made with a different version of TWRP, so it might work in general) - simply do not expect too much of it at the moment.
    • If you haven't copied the installation files yet, you can now copy the GApps and the ROM zip to your internal sd or external sd (be careful not to put the files into the data directory of the internal sd card as this will be deleted in the next step). Be sure that MTP is enabled (inside Mounts, click on Enable MTP), then, from your pc, copy the files. If MTP does not work from recovery, try it directly from Android or remove the external sd card from the phone and put it into your PC.
    • Wipe Dalvik Cache, Cache, System and Data (inside Wipe -> Advanced Wipe). Do not report problems if you did not wipe those partitions as the problems are most probably related to this!
    • Install the CM ROM zip-package
    • Install the GApps zip-package

    How to root:
    LineageOS does not have root support integrated by default. You have to download addonsu-arm-signed.zip for 14.1 from the Lineageos Extras download page and install it with TWRP.
    After that root access is still disabled by default. If you want to activate root access for apps, do the following:
    • Open the Settings menu, select "About Phone"
    • Tap on the "Build number" entry seven times. You should be notified, that the developer settings are now active.
    • Open the Settings menu, select "Developer options". Enable root access by selecting "Apps" in the "Root-Access" setting.

    In case you want to go back to the stock ROM:
    • lf you do not have the latest ROM for the G800F you can download it from SamMobile
    • Reboot your phone into Odin mode
    • Open Odin on your PC and connect your smartphone with your PC via USB
    • If you have a zip-file unzip it so that you have a .tar.md5 file
    • In Odin click on the PDA button and select the .tar.md5 file. Then press "Start".
    • Normally the stock rom fails to boot as the data from CM is still on the data partition. So after flashing the stock rom, reboot into recovery mode (it looks a bit different now). First wipe the data partition, then wipe the cache.
    • Reboot

    Changelog
    Code:
    Changelog:
    19/08/2017:
    * SELinux policy update
    * Update to newest LineageOS sources
    02/06/2017:
    * Firefox crash&reboot fixed (thanks to Spookcity)
    * Enabling the fingerprint reader does not cause bootloops anymore (thanks to Spookcity)
    * Ambient display option added (disabled by default)
    28/05/2017:
    * [COLOR="red"]Note: ROM is stuck in bootloop when fingerprint reader is enabled. ROM removed.[/COLOR]
    * Enabled selinux (thanks to mirhciulica for fixing all those selinux denials). If you encounter problems check for "avc: denied" messages in logcat (see: https://source.android.com/security/selinux/validate)
    * Fixed Snapchat and SafetyNet problems (Snapchat reported server errors, Safetynet Helper reported a 1970 timestamp): Kernel patch was necessary.
    * Updated kernel to 3.4.107
    * Applied most of the patches from [URL="https://android.googlesource.com/kernel/common/+/deprecated/android-3.4"]kernel/common/deprecated/android-3.4[/URL]
    * Updated LineageOS sources
    * FlipFlap added to support smart flip covers: shows a screen with the current time in the window of the smart cover. Note that this relies on the magnetic sensor at the bottom of the phone. So magnets near the sensor can trigger this behavior too.
    * Replaced the buggy Gello webbrowser with Jelly - the new LineageOS default browser
    * Replaced the buggy Snap camera with the LineageOS default camera app
    * Replaced the Samsung battery charger app (lpm) with healthd (looks uglier but at least works with selinux)
    
    20/02/2017:
    * Fixed Youtube scaling issue on window resizing
    * Compass fixed (thanks to mirhciulica for figuring out what's wrong)
    * cpufreq config added
    * Charge mode fixed (starts when plugging USB into a powered-off phone)
    * USB-Tethering and Wifi SoftAP (Hotspot) fixed
    * Camera doesn't crash when switching between camera and video (but might still crash sometimes)
    * Fingerprint libs reverted from MM to LP (maybe that fixes the fingerprint issues - please test)
    
    01/02/2017:
    * conversion to LineageOS
    * updated some libs with stock MM versions
    * fixed robotic voice problem
    * fixed silence on first call
    
    07/11/2016:
    * Initial test build

    This section is for developers:
    A README file with build instructions can be found here:
    Code:
    https://github.com/cm-3470/android_device_samsung_kminilte

    Sources:
    Code:
    https://github.com/cm-3470/android_device_samsung_kminilte
    https://github.com/cm-3470/android_vendor_samsung_kminilte
    https://github.com/cm-3470/android_kernel_samsung_kminilte
    https://github.com/cm-3470/android_device_samsung_smdk3470-common

    Developers welcome
    • At the moment the G800F/M/Y specific port of this ROM is only done by two persons (CTXz and hennymcc). Although Unjustified Dev also works on this ROM he does not own an Galaxy S5 Mini but a Galaxy Light which has a similar base but is different when it comes to camera, nfc and other components (maybe even slightly when it comes to audio and radio).
    • Help from other developers is always welcome. See the bug/feature section and this thread to see what is missing. Just give some short info (here in this thread or PM) that you want to work on some issue or feature so that work can be synchronized. Maybe there are also other devs that want to work with you on the same issue.
    • Knowledge in how the kernel works and good programming skills in C, C++ and Java would be nice but not necessary for all problems. At least you should be able to build the ROM and test your changes yourself but you do not need experience in porting ROMs.

    Thanks to CTXz, Psyafter, spookcity138, ayke and mirhciulica for working on this ROM.

    XDA:DevDB Information
    [G800F/M/Y][ROM][7.1][NJH47F] LineageOS 14.1 for G800F/M/Y [Beta 19/08/2017], ROM for the Samsung Galaxy S5 Mini

    Contributors
    hennymcc, Panzerknakker, spookcity138, psyafter, ayke
    Source Code: https://github.com/cm-3470

    ROM OS Version: 7.x Nougat
    ROM Kernel: Linux 3.4.x
    ROM Firmware Required: TWRP Recovery [version >= 15/08/2015]
    Based On: LineageOS

    Version Information
    Status: Beta

    Created 2017-02-01
    Last Updated 2018-08-18
    21
    Hi there is a new build:
    https://www.androidfilehost.com/?fid=529152257862704787

    Changelog:
    • Fixed Youtube scaling issue on window resizing
    • Compass fixed (thanks to mirhciulica for figuring out what's wrong)
    • cpufreq config added
    • Charge mode fixed (starts when plugging USB into a powered-off phone)
    • USB-Tethering and Wifi SoftAP (Hotspot) fixed
    • Camera doesn't crash when switching between camera and video (but might still crash sometimes)
    • Fingerprint libs reverted from MM to LP (maybe that fixes the fingerprint issues - please test)
    21
    Official TWRP 3.1.1

    I've worked together with the TWRP maintainers to make TWRP official, and it's finally here :D
    https://xdaforums.com/galaxy-s5-mini/orig-development/recovery-twrp-3-1-1-exynos-t3626646

    You can download it from here:
    https://twrp.me/devices/samsunggalaxys5miniexynos.html
    21
    A new build is available:
    https://www.androidfilehost.com/?fid=961840155545570720

    It turned out that the patch found by Spookcity not only fixes Firefox but also the fingerprint bootloop. So the new build should be usable again.
    As the initial bootloops probably were also caused by the fingerprints it should not be necessary anymore to wipe everything (although still recommended).

    Changes:
    • Firefox crash&reboot fixed
    • Enabling the fingerprint reader does not cause bootloops anymore
    • Ambient display option added (disabled by default)
    17
    A new build is available.
    https://www.androidfilehost.com/?fid=889764386195902448

    Changelog:
    Code:
    * Enabled selinux (thanks to mirhciulica for fixing all those selinux denials). If you encounter problems check for "avc: denied" messages in logcat (see: https://source.android.com/security/selinux/validate)
    * Fixed Snapchat and SafetyNet problems (Snapchat reported server errors, Safetynet Helper reported a 1970 timestamp): Kernel patch was necessary.
    * Updated kernel to 3.4.107
    * Applied most of the patches from [URL="https://android.googlesource.com/kernel/common/+/deprecated/android-3.4"]kernel/common/deprecated/android-3.4[/URL]
    * Updated LineageOS sources
    * FlipFlap added to support smart flip covers: shows a screen with the current time in the window of the smart cover. Note that this relies on the magnetic sensor at the bottom of the phone. So magnets near the sensor can trigger this behavior too.
    * Replaced the buggy Gello webbrowser with Jelly - the new LineageOS default browser
    * Replaced the buggy Snap camera with the LineageOS default camera app
    * Replaced the Samsung battery charger app (lpm) with healthd (looks uglier but at least works with selinux)