G900V Hard Brick

[[email protected]]

Boot to recovery mode and it will tell you which firmware you are on

from there download the firmware you are on from sammobile. Com

Then flash it in Odin

This shouldnt cause any loss of data

 

[players21]

Boot to recovery mode and it will tell you which firmware you are on

from there download the firmware you are on from sammobile. Com

Then flash it in Odin

This shouldnt cause any loss of data

Phine is completely dead no life looking for boot it off a SD card

 

[[email protected]]

try to find an unbrick img for your firmware

 

[players21]

Battery is good I used a different battery from a different charged phone

 

[[email protected]]

does anyone have a pb1 unbrick img please
found one here http://forum.xda-developers.com/ver...brick-images-hardbrick-recovery-plan-t3387010

 

[burnie42093]

help

Hello,

Can you please help ? i have a hard brick S5 Verizon. can you pm me ?

Thanks

can u text me? i really need help fixing my phone and no one seems to want to help

---------- Post added at 11:44 PM ---------- Previous post was at 11:39 PM ----------

can u text me? i really need help fixing my phone and no one seems to want to help

my pone number is 907 385 5423 plz help!!!!!! text or call

 

[hiroprotagonist]

Any one have debrick image for QD1 firmware for G900V? Got one that flashed fine then went off. All the other unbrick images here dont work for it as far as i can tell
Thanks in advance

 

[bbsc]

Hi.

Is there a reliable way to hardbrick our device?
I have a working SM-G900V here and need to hardbrick it for some experiments
I'd like to see "Qualcomm HS-USB QDLoader 9008" in Windows device manager.

Tried to flash a bootloader via ODIN without battery and disconnect the cable during this process several times.
No luck so far, it's been flashed damn reliably .

Any suggestions?

 

[CVertigo1]

Hi.

Is there a reliable way to hardbrick our device?
I have a working SM-G900V here and need to hardbrick it for some experiments
I'd like to see "Qualcomm HS-USB QDLoader 9008" in Windows device manager.

Tried to flash a bootloader via ODIN without battery and disconnect the cable during this process several times.
No luck so far, it's been flashed damn reliably .

Any suggestions?

If you must hard brick, then you can flash an old bootloader with FlashFire, but you have to enable flashing bootloader in the FlashFire settings.

 

[bbsc]

If you must hard brick, then you can flash an old bootloader with FlashFire, but you have to enable flashing bootloader in the FlashFire settings.

Thanks, I'll try it.

 

[dzvxo]

Hardbricked!

My G900V got hardbricked too, sadly. I don't know what firmware it was running, I just know it was on 6.0.1 . Tried to do a restore from the Verizon Software Assistant, and I got an aboot error and it wouldn't turn on after that. What are my options? Would I have to get debrick images for all 10 releases of 6.0.1 and try to have them boot one by one from microSD? Interestingly, I noticed something when flashing one of the debrick images and running it on the device. When the SD card is not inserted, there is a constant whining noise (faint) coming from the back. I assume that's normal. However, when I put the SD in, the whine sound comes in short pulses. I just think that's a little odd. I don't think there's anything wrong with it hardware-wise, since it worked fine before.

Any thoughts?